• Safety and Health at Work
• /
• v.10 no.2
• /
• pp.172-179
• /
• 2019

Background: Workers exposed to hazards without adequate protections are at greater risk of injury and illness. Supervisor activities have also been associated with injury risk. We examined the interplay between supervisor safety support and occupational health and safety (OHS) vulnerability on workplace injury and illness. Methods: A survey was administered to 2,390 workers employed for more than 15 hrs/week in workplaces with at least five employees who had a direct supervisor. We examined the combined effects of hazard exposure with inadequate protection (OHS vulnerability) and supervisor support on workplace injury and illness, using additive interactions in log-binomial regression models. Results: OHS vulnerability and lack of supervisor support independently increased the likelihood of physical injuries at work. Crude and adjusted models showed that the risk of physical injury was at least 3.5 times higher among those experiencing both OHS vulnerability and a lack of supervisor support than individuals without OHS vulnerability and with a supportive direct supervisor. Workers who experienced vulnerability were at less risk if they had a supervisor who was supportive. Conclusion: In workplaces where workers experience one or more types of OHS vulnerability, having a supportive supervisor may play an important role in reducing the risk of injury and protecting workers.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.457-461
• /
• 2004

The insufficient management o( the risk of preconstruction phase causes the risk of construction phase so it makes bad effects such as the extension of construction time and raising of cost. Therefore, the management of the risk of preconstruction phase is being considered as an important element of success of project and the competitive power of construction companies. This study Is to suggest solution methods for each progress after examining reasons of the risk for the management of the risk of preconstruction phase 1'he progress is limited as earth work, RC work, steel work and curtain wall work. Through the introduction of Knowledge Management system, work flow is made by specialist of each part. The reasons of the risk of progress are chosen through the analysis of work flow and I suggest detailed solutions such as person in charge, the starting point of progress and the information of requirements according to the grade of importance about elements of the risk

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.6
• /
• pp.131-137
• /
• 2021

Since many resources are put into the work of changing the railway operation within limited time, it is important to have a specific work plan and safety management. For this reason, the work schedule is shared in advance, and parallel work is being carried out simultaneously by rail system, such as tracks, trolly wires, and signals. However, due to the nature of the transfer work, the work is carried out at night when the railway operation is finished, and many resources are put into the limited area of the operating line, so the risk of safety accidents and failure to change the operating line is recognized as high. Nevertheless, there is still not enough research done in korea regarding the operation line change construction. Therefore, this study is conducted a survey on the track exchange work of railroad for working people, and analyzed the results of the survey. Finally, a standard work process was suggested to reduce the risk of track exchange work.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.1
• /
• pp.27-35
• /
• 2005

This paper describes a practical ergonomic approach for the shipbuilding industry that occupies the highest rate of work-related musculoskeletal disorders (WMSD) in Korea. Typical work processes within a shipbuilding operation were surveyed to determine the presence of risk factors associated with musculoskeletal disorders. We used interviews, document analysis, video analysis, and OWAS postural analysis to identify and quantify ergonomic risk factors that workers may be exposed to in the course of their normal work duties. Some ergonomics actions were performed to solve the problems identified in the risk factor analysis. The practical ergonomic approach has resulted in decreases in workers' accident, and increases in productivity. The ergonomic solutions developed in this study could be applied to other sectors of industry that share common features of work with shipbuilding industry.

• Journal of the Korean Society of Safety
• /
• v.35 no.2
• /
• pp.61-66
• /
• 2020

As asbestos-containing buildings are getting older, asbestos deconstruction works are increasing. As a result, accident risks such as falls, cuts, electric shocks, and suffocation are increasing. Existing studies are mostly about health management and institutional policy research and there is little research on work risk. So workplace risk assessments that are easily applicable in the field are required to be applied. Sealing is the first process of asbestos deconstruction and is the first step to ensure worker's safety. Job Safety Analysis(JSA) and Checklist were used to identify the risk factors and to calculate the level of the risk. By comparing the two risk assessment tools, it was figured out that the JSA is appropriate for the initial process and change of work procedure while Checklist is appropriate for repetitive work. Because the sealing process is sort and simple, it is unlikely to cause serious injury. But since the risk of falling and cuts are exist, safety education and supervision are necessary to maintain a safe working environment.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.2
• /
• pp.123-129
• /
• 2007

In 2003 the Korean Government introduced 'the risk factors analysis system' in order to prevent the work-related musculoskeletal disorders. In addition, the proclamation by the Ministry of Labor delineated eleven spheres of work associated with musculoskeletal disorders. According to Occupational Safety and Health Regulations, business proprietors who have workers engaged in tasks associated with musculoskeletal disorders are required to carry out a survey on risk factors every three years. Effective risk factors analysis principles and practices will succeed by refining the workplaces continuously. However, numerous difficulties arise during the application of risk factors analysis to the various industries. We discuss a number of issues related to risk factors analysis system, and suggest a number of directions for future work in this area.

• Journal of Preventive Medicine and Public Health
• /
• v.35 no.3
• /
• pp.197-204
• /
• 2002

Objectives : To evaluate the association between working conditions and adverse pregnancy outcomes in Korea. Methods : We obtained data on health history, lifestyle, housework and Working conditions, such as shift work, hours standing, working time, job demand, lifting at work and at home, between August and September 2000, from self-reported questionnaires. A group of 344, occupationally active, pregnant women from 51 industries were studied. Of the women studied, 328 women were further interviewed by telephone between November 2000 and September 2001. Result : Compared with daytime work, shift work increased the risk for preform birth (an adjusted risk ratio of 2.74, 95% CI=1.02-2.62) and low birth weight (an adjusted risk ratio of 2.74,95% CI=1.02-2.02). A significantly increased risk was found for prolonged standing, with an adjusted risk ratio of preform births of 6.80 (95% CI=2.01-23.0). There were no significant differences in the incidence of spontaneous abortion between the occupational working conditions, with the enception of a previous history of spontaneous abortion. Conclusion : These findings suggest that maternal working conditions, such as shift work and prolonged standing, contribute significantly to preterm birth and low birth weight.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.2
• /
• pp.152-160
• /
• 2024

We analyzed risk factors of coastal gillnet fishers during fishing process and considered work safety measures to reduce safety accidents during fishing using a UWB (ultra wideband) based positioning system. The static position accuracy of the UWB based positioning system was 45 cm. When entering a port, there is a risk of falling overboard. When casting a net, there was a risk of falling overboard due to being hit by fishing gear or guards, or getting caught in a buoy line or sinker line. When hauling a net, there is a risk of getting caught between fishing gear and net hauler, and the risk of musculoskeletal disorders due to repetitive work over a long period of time. Most safety accidents during work on fishing boats are blamed on human errors of the fisher and skipper, but safety accidents occur due to a mixture of mechanical and equipment factors, work and environmental factors, and management factors in addition to human errors. Therefore, the 4E were presented as countermeasures against the 4M, which are causes of safety accidents, and the proposed measures were used to identify risk factors for operation process, comply with work safety rules, and ensure the wearing of personal protective equipments. We need to reduce safety accidents during work by making it part of our daily routine. These research results can be used in the future for optimal placement of fishing gear and fishing nets in other coastal industries where safety accidents occur frequently.

• Safety and Health at Work
• /
• v.5 no.3
• /
• pp.140-146
• /
• 2014

Background: Young male and female workers are over-represented in statistics concerning negative outcomes of poor work environment and risky work. Young workers often have low awareness of risk, a lack of safety training, and inadequate introduction to the work. The aim of this study was to identify the knowledge and experiences of pupils of vocational schools concerning potential work environment risks in their future work. Methods: The study design was a dual one, and included a questionnaire and focus group interviews. The study group consisted of 239 pupils from 10 upper secondary schools, who were graduating pupils in four vocational programs: the Industrial Technology Programme, the Restaurant Management and Food Programme, the Transport Programme, and the Handicraft Programme (in which students specialize in wood products). The upper secondary schools were located in the central region of Sweden. Results: The pupils had limited knowledge that employers must, by law, conduct risk analyses and prevent risks. Many felt that they themselves are mainly responsible for performing their tasks safely. Pupils in all programs mentioned acute risk as the greatest risk at work. The theoretical education about safety at work was provided in the $1^{st}$ year of the 3-year vocational programs. Conclusion: A systematic approach to pupils' training in work environment, which is a basis for a safe and healthy workplace, is lacking. The study findings indicate that pupils are offered knowledge far from that intended by laws and by state-of-the-art occupational health risk research.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.3
• /
• pp.298-307
• /
• 2023

Objectives: The purpose of this study is to analyze the recent trends in patients with work-related musculoskeletal disorders in South Korea and to check the major results by reviewing the literature on the risk factors and prevalence of musculoskeletal diseases related to work. Methods: Industrial disaster data from the Ministry of Employment and Labor from 2012 to 2021 were used, and the literature was reviewed regarding risk factors for musculoskeletal diseases related to work using PubMed and RISS. Results: The trend of patients with work-related musculoskeletal disorders has increased overall since 2017 after declining until 2016, with a particularly notable increase in the average annual number of patients with physical burden work. The average annual rate per ten thousand people for patients with body burden work, non-accidental lower back pain, and carpal tunnel syndrome among work-related diseases was high in the mining industry. The average annual rate per ten thousand people for patients with accidental lower back pain was the highest in the fishing industry. Within the manufacturing field, it was the highest in the shipbuilding and ship repair industry. As a result of the literature review, the search rate for work-related musculoskeletal disease papers in unstructured work was high. In addition, physical stress factors were high among risk factors, and pain areas showed a high rate for the waist. Conclusion: Even after the institutional implementation of a hazard investigation system related to musculoskeletal diseases is implemented, the number of patients with occupational musculoskeletal disorders continues to increase. Therefore, it is necessary to conduct regular surveys and implement effective improvement activities for vulnerable industries or occupations.