• The Journal of Sustainable Design and Educational Environment Research
• /
• v.16 no.2
• /
• pp.1-9
• /
• 2017

Defect dispute in apartment building has become a debating social issue. The system of defect lawsuit and the conciliation process are applicable to solve defect problems in South Korea. Among various defects, painting work defect is a critical issue because it requires large area works and entails a lot of cost. Accordingly, disputes on work procedure and cost calculation are argued oftenly between residents and housing providers. This study reviewed detailed main issues of painting work and propose relevant systems and standards. In this analysis, the main issues are categorized into pre-works, main work, and others. The most recent cases are compared and analyzed for each issue. After the analysis, following conclusions are obtained, (1) In defect lawsuit system, even though surface treatment work in pre-work step is part of main work, it has been separated and regarded as a separate work. (2) Although the main painting work are not significantly different from two systems, it is still necessary to achieve a consensus to close the gap in the methodology of painting area calculation and determining whole painting or partial painting. (3) In addition, unlike the profit rate of general construction works, that of painting work remained the maximum rate and additional charge rate for works carried out in higher place are different among cases. Therefore, it is determined that establishing consistent standards is urgent.

• Safety and Health at Work
• /
• v.7 no.4
• /
• pp.299-306
• /
• 2016

Background: Noncompliance of operators with work procedures is a recurrent problem. This human behavior has been said to be situational and studied by many different approaches (ergonomic and others), which consider the noncompliance with work procedures to be obvious and seek to analyze its causes as well as consequences. Methods: The object of the proposed method is to solve this problem by focusing on the performance of work procedures and ensuring improved performance on a continuous basis. Results: This study has multiple results: (1) assessment of the work procedures' performance by a multicriteria approach; (2) the use of a continuous improvement approach as a framework for the sustainability of the assessment method of work procedures' performance; and (3) adaptation of the Stop-Card as a facilitator support for continuous improvement of work procedures. Conclusion: The proposed method emphasizes to put in value the inputs of continuous improvement of the work procedures in relation with the conventional approaches which adopt the obvious evidence of the noncompliance to the working procedures and seek to analyze the cause-effect relationships related to this unacceptable phenomenon, especially in strategic industry.

• International Journal of Computer Science & Network Security
• /
• v.21 no.5
• /
• pp.222-230
• /
• 2021

The article reviews the issue of formation of information culture of social work bachelors in the process of their professional training. The main internal / external factors that determine the need for the information culture formation of social workers-to-be have been identified. To determine the levels of information culture formed in bachelors of social work criteria and their indicators have been substantiated. The model of information culture formation in BSW has been developed and implemented in Ukrainian universities under the following pedagogic conditions: organized informational environment; interconnection between general and professionally-directed courses; curriculum includes course directed on IC formation. The model contained interconnected components: aim - to achieve higher level of information culture formed; specific principles; content, interactive methods and forms of organization of educational process, methods of control and correction; components of information culture. The implemented mastered learning procedure has contributed to the leveling up of information culture formed in social work bachelors.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.2060-2063
• /
• 1998

The proper placement of work-coil is needed for heating the interior of an IH rice cooker uniformly. It is possible that the flavor of rice is better by heating it through the optimal placement of the work-coil of the IH rice cooker. This paper describes the procedure and the result of finding the optimal placement of the work-coil by analyzing the properties of the rising temperatures of the interior through Taguchi Method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.173-183
• /
• 2018

It is a very difficult task to establish a collaborative procedure in a new business that requires multilateral collaboration or to revise the regulation by analyzing and proving objectively the problems in the collaborative process conducted already by multilateral collaboration. In this paper, we proposed an optimization model for collaborative process to establish the operation procedure between collaborative parties using PERT/CPM network diagram which allows us to calculate the processing time. In order to verify the effectiveness and usefulness of our model for the collaboration process optimization developed in this study, we applied the developed collaborative procedure to student selection of the work-and-study-in-parallel course associated with a degree executed by Ministry of Employment and Labor. This study can be useful not only for newly establishing or reconfiguring collaborative procedures but also for standardizing the business procedures for building information systems between collaborative organizations.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.279-285
• /
• 1998

This study investigated human error characteristics of the 42 fatal industrial accidents reported by staff members of Korea Industrial Safety Corporation. Various types of human error were judged to be primary contributing factors in about 74 percent of the cases. Most of human error made by involved industrial operators resulted from two types of mistakes: (1) mistake in judgement of work situation, and (2) omission in daily check. It was concluded that preparation/observance for work procedure manuals, danger predication training and enforcement/Education of daily check routine would be effective preventive tools for these types of human error attributable to fatal industrial accidents.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.640-642
• /
• 1999

Recent work within the DNP work group has resulted in the proposal, DNP 3.0, as the informative interface for distribution automation systems. This proposed standard embodies the generic principles developed and used within generic protocol. This paper describes a compliance test procedure specifically for Distribution Automation System, practical experience.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.7 s.196
• /
• pp.39-48
• /
• 2007

This paper presents a method of a line balanced assembly sequence generation based on the verification of a disassemblability and a work time. To derive the disassemblability for a part to be disassembled, first we inference collision free assembly directions by extracting separable directions fur the part. And we determine the disassemblability defined by the separability and stability cost. The separability cost represents a facility of the part disassembly operation, and the stability cost which represents a degree of the stability for the base assembly motion. Based upon the results, we propose a new approach of evaluating work time using neural networks. The proposed assembly sequence generation provides an effective means of solving the line balancing problem and gives a design guidance of planning assembly lay-out in flexible manufacturing application. Example study is given to illustrate the concepts and procedure of the proposed schemes.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.261-264
• /
• 1999

An integrated finite element-based model is presented for the prediction of the three dimensional tran-sient thermo-mechanical behavior of the work roll in hot strip rolling. The model is comprised of basic finite element models which are incorporated into an iterative solution procedure to deal with the inter-dependence between the thermo-mechanical behavior of the strip and that of the work roll which arises from roll-strip contact as well as with the interdependence between the thermal and mechanical behav-ior Demonstrated is the capability of the model to reveal the detailed aspects of the thermo-mechanical behavior and to reflect the effect of various process parameters.

• Journal of the Korean Society of Earth Science Education
• /
• v.3 no.3
• /
• pp.198-208
• /
• 2010

This work describes a preliminary investigation to a learning model based on cybernetics and radical constructivism. To achieve this purpose, main ideas of cybernetics, i.e., negative feedback, difference, self-regulation, equilibrium, and purpose-directed behavior was analysed under radical constructivism. Powers' model, which consists of hierarchically arranged negative feedback systems, is introduced into this work. This was based on the claim that living organisms behave to control perceptions. By adding the notion of scheme from the view of radical constructivism, a learning procedure, which consists of six steps, was suggested in this work.