• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.2
• /
• pp.166-174
• /
• 2018

Objectives: This study aimed to estimate the number and proportion of target workplaces for work environment monitoring and evaluate the implementation rate of work environment monitoring. Methods: A questionnaire survey was conducted by the Ministry of Employment and Labor between March and May 2017 among 96,295 manufacturing businesses with more than five employees. The response rate was 17.8%. Estimates of the number and proportion of target workplaces for work environment monitoring were calculated as follows: number of workplaces where work environment monitoring was performed in 2016 + exposure rate based on the questionnaire * number of workplaces where work environment monitoring was not conducted. Results: Of the 150,655 total manufacturing businesses with more than five employees, 63,146 are estimated to be subject to work environment monitoring, which accounted for 41.9% of the workplaces. It is estimated that 73.3% of the target workplaces performed work environment monitoring. The number of workers exposed to hazardous substances is estimated to be about 0.7~1.2 million. Conclusions: Information on the distribution of workplaces subject to work environment monitoring and the rate of implementation can be used as baseline information for management and evaluation of the effectiveness of the work environment monitoring system.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.3
• /
• pp.250-260
• /
• 2013

Objectives: The aim of this study is to analyze the current status of the possession of measurement and analytical instruments among work environment monitoring organizations that have been designated by the Ministry of Employment and Labor (MoEL) in Korea. Methods: Data for measurement and analytical instruments were gathered by inspectors who had been assigned by the Korea Occupational Safety and Health Agency (KOSHA) and MoEL during the evaluation program for designated work environment monitoring service providers in 2012. Data for 11 monitoring instruments and nine analytical instruments were collected from 108 organizations. Basic data such as the type of service provides and the size of employment were also recorded by the inspector. Results: The total number of personal air samplers including high and low flow rates operated in Korea was 5,418, with average of 50.2. Average operation number of noise dosimeters was 35.0, while 3,780 dosimeters were used in 108 work environment monitoring organizations. There were 10,488 monitoring instruments in total. All service providers possessed at least one AAS and GC in their analytical laboratory. Total number of HPLC/MS was five, followed by ICP/MS of seven, with an average of 0.07. Conclusions: Based on the data, domestic work environment monitoring service providers possessed relatively reasonable measurement and analytical instruments. Nearly all instruments had been imported from advanced countries such as USA, UK and Japan. Periodic gathering of data on these instruments may help maintain good workplace monitoring results and the health of workers at the sites.

• Journal of Construction Engineering and Project Management
• /
• v.2 no.4
• /
• pp.42-45
• /
• 2012

In construction industry, the term 'procurement' is considered as a project based job where clients and contractors are always keen to observe performance indicators. These indicators represent financial and non-financial efficiency of project activities. Among these, the monitoring of financial indicators such as cost monitoring is an ongoing process and its importance cannot be undermined during the project life cycle. It can be monitored by using traditional approach of direct reporting of actual cost against budget. However, the comparison of budget versus actual spending does not indicate the worth of the work which is completed at any given time. This approach does not represent the true cost performance of the project. Because of these limitations, this paper discusses the applications of Earned Value Analysis (EVA) for cost monitoring of construction projects in Malaysia. Besides traditional approach, EVA is a three-dimensional approach that compares three cost indicators i.e. the budgeted value of work scheduled with the earned value of physical work completed and the actual cost of work completed. Therefore, cost monitoring by EVA is an objective measure of actual work performed. This paper uses a case study, an example application of EVA as a cost monitoring tool. This case study reaffirms the benefits of using EVA for project cash flow analysis and forecasting.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.4
• /
• pp.193-204
• /
• 2016

Objective: This study carried out base research to build an agricultural safety monitoring system through ICT convergence to reduce safety accidents and enhance welfare in life in the agricultural field. Background: The functions and values of rural villages as the space of living are recognized anew, but occupational accident rate due to farm work accidents is on the rise each year. Therefore, the seriousness of such a problem emerges. The convergence technology combining ICT is recently applied to industries overall, and therefore better services are offered. However, studies on ICT convergence has not yet been applied to the agricultural safety field. Method: This study identified ICT convergence service technology trends and representative serious accident types mainly occurring in agricultural activities. This study defined the major factors of farm work accidents and ICT to solve those accident factors including the sensor technology, wired/wireless communication technology and location information service, and applied them to prototype PCB for the development of an agricultural safety monitoring system. Results: This study proposed an emergency monitoring system for farmers and a harmful environment monitoring system. The ICT technology to prevent farm work accidents can be summarized as sensing technology, ICT and network technology and user interface technology. This study also designed PCB module configuration and situation judgment algorithm as basic research for proposed monitoring system development. Conclusion: The ICT-based agricultural safety monitoring research proposed in this study is expected to become the basis to build a future real time monitoring system, and also is expected to contribute to social safety and welfare service improvement for farmers. Application: The ICT convergence farmer accident prevention system will make contributions to the prevention of serious farm work accidents.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.768-769
• /
• 2016

To prevent occupational disasters and build a pleasant work environment, it is necessary to develop a monitoring system to keep operators safe from the hazards. A variety of practical studies must be performed on application services designed to freely provide context-aware monitoring services in USN environments. This paper proposes a system in which work environment monitoring information can be monitored using a mobile phone and inference engine. The structure of a mobile work environment monitoring system is designed first. The proposed system is consisted of data manager, inference engine, database, and application knowledge base.

• Safety and Health at Work
• /
• v.8 no.3
• /
• pp.322-326
• /
• 2017

In 1992, the quality control program was introduced in Republic of Korea to improve the reliability of the work environment monitoring, which was introduced in the 1980s. The commission entrusted by the Ministry of Employment and Labor, the Occupational Safety and Health Research Institute has conducted the program for industrial hygiene laboratories including designated monitoring institutions and spontaneously participating agencies. The number of institutions that participated in the program has increased from 30 to 161. The initial conformance ratio in the participants was 43% (organic solvents) and 52% (metals). Thereafter, the conformance ratio increased rapidly and it has remained in a stable state at more than 89% since 1996. As subject materials, 13 kinds of organic solvents and 7 kinds of metals were used. To improve the capability of measurement and analysis of private institutions, educational courses were conducted annually. An assessment at the actual sites of participants was additionally introduced into the program in 2013. Thus, the program turned into a system that administrates the overall process of participants. For the future, the scope of target materials will be extended through additional items. Thus, the reliability of the results of the work environment monitoring is expected to increase accordingly.

• Safety and Health at Work
• /
• v.13 no.1
• /
• pp.112-116
• /
• 2022

Background/Aims: The Gachon Regional Occupational Cohort Study (GROCS) is a large-scale longitudinal study of occupational safety and health data (covering Work Environment Monitoring, Workers' Health Surveillance, and Occupational Health Service) conducted by the Gachon University Gil Medical Center (GUGMC) in Incheon, Republic of Korea. We conducted GROCS to identify the health effects of workers' occupational risks, behavior, socioeconomic status, and life style. Methods: The GROCS includes data from Work Environment Monitoring, Workers' Health Surveillance, and Occupational Health Service. The baseline year for all data collection was 2018. Work Environment Monitoring was conducted in 240 companies located in Incheon. General Health Examination and Special Health Examination were performed on 32,725 and 9,504 workers, respectively. Occupational Health Services were provided to 16,883 workers in 171 companies. These data have been collected and operated at an external data management institution and were provided as a retrospective cohort after removing personal identification information. Results: In 2018, the total number of companies was 2,854, among which which 488 special Health Examination, 171 Work Environment Monitoring, and 240 Occupational Health Service. The proportion of companies undergoing Special Health Examination was 17.1%, the proportion of companies undergoing Work Environment Monitoring was 8.4%, and the proportion of Companies undergoing Occupational Health Service was 6.0%. Conclusion: GROCS expects researchers to utilize its useful and reliable resource for occupational health and surveillance with for academic or political purposes to lead to improved workers' health and working environment.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06a
• /
• pp.1-6
• /
• 1996

A seeder monitoring system was developed to remove the uneasiness of mis-sowing that drop operations efficiency at sowing-work and to make reliable and stable work. The objectives of this study are to investigate that the system developed is applicable to sowing soybean seeds and scattering fertilizer and to evaluate performance of the system developed through the indoor test and the indoor test and the field test before it is propelled to put the system developed to practical use.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.1
• /
• pp.105-115
• /
• 2020

With the decrease of the agricultural population in Korea, the workers who is vulnerable to labor are increasing in agricultural industry because of aging, feminization of population. They are exposed in poor working environment with higher temperature and concentrations of dust, gas. Higher concentration of harmful gas and dust can cause chronic and acute disease to workers depending on exposure intensity and frequency. In order to improve the working environment in the livestock facilities, It is important to secure monitoring data of the thermal environment and the concentration of harmful gases and fine dust. Multi-point measurement was performed to analyze the regional environmental conditions in the pig rooms. When analyzing the working environment, video monitoring was conducted to analyze the concentration changes of ammonia, hydrogen sulfide and fine dust according to worker movement and work type. Ammonia and hydrogen sulfide monitoring result showed 1.5~2 times higher concentrations than other work when working in the pigs living zone, and 2~4 times higher than other work when working to increase the activity of pigs. In the case of fine dust, the result was 1.3 times higher than the worker's exposure standard in a specific work. The concentrations of gases and dusts from pig farms are not of concern for acute poisoning in normal work, but there is a risk of chronic respiratory disease if they are continuously exposed. Accordingly, there is a need for development of work environment monitoring device tailored to workers and preparation of alternatives.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.2
• /
• pp.182-192
• /
• 2014

Objectives: The aim of this study is to analyze the current status of possession of measurement and analytical instruments at work environment monitoring organizations and their relationships with human resources, including the number of professional engineers and evaluation scores resulting from evaluation programs in 2012. Materials: Data for measurement and analytical instruments were gathered by inspectors who had been assigned by the Korea Occupational Safety and Health Agency(KOSHA) and the Ministry of Employment and Labor(MoEL) during the evaluation program for 2012. Data for 11 monitoring instruments and nice pieces of analytical equipment were collected from 103 organizations. Additional data such as the type of service provides and the number of professional engineers employed were also recorded by the inspectors. Evaluation scores could be acquired from KOSHA. Results: Comprehensive Occupational Health Service Providers showed good operation quality, while University or Hospital Subsidiary and Work Environment Monitoring Organizations recorded relatively poor results. Evaluation scores correlated well with the possession of measurement instruments and human resources for each organization. High yields provided by professional engineers also showed statistically-associated contributions to evaluation scores and monitoring instrument possession. Compared with monitoring instruments, the amount of analytical equipment had little positive impact on organizations' competence. Conclusions: The evaluation results for domestic monitoring organizations revealed that human resources, possession of instruments, and the quality of employees were critical factors for operating the corporations. Each organization should give considerable effort to improving their ability to strengtheninternal quality, resulting in high-yield production for workers and employers by providing improved workplace monitoring services.