• Phonetics and Speech Sciences
• /
• v.8 no.4
• /
• pp.89-95
• /
• 2016

The purpose of this work is to analyze and synthesize the pseudo-periodicity of voice using a source model. A speech signal has periodic characteristics; however, it is not completely periodic. While periodicity contributes significantly to the production of prosody, emotional status, etc., pseudo-periodicity contributes to the distinctions between normal and abnormal status, the naturalness of normal speech, etc. Measurement of pseudo-periodicity is typically performed through parameters such as jitter and shimmer. For studying the pseudo-periodic nature of voice in a controlled environment, through collected natural voice, we can only observe the distributions of the parameters, which are limited by the size of collected data. If we can generate voice samples in a controlled manner, experiments that are more diverse can be conducted. In this study, the probability distributions of vowel pitch variation are obtained from the speech signal. Based on the probability distribution of vocal folds, pulses with a designated jitter value are synthesized. Then, the target and re-analyzed jitter values are compared to check the validity of the method. It was found that the jitter synthesis method is useful for normal voice synthesis.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.1
• /
• pp.69-81
• /
• 2010

Physical manifestations of aging due to the lack of exercise include the slowing down of motor learning, cardiopulmonary degradation, and the increasing difficulty to adapt to the environment. Aging is manifested with the lack of aerobic exercise work, decrease in muscular endurance, decline in skeletal and muscular strength, flexibility and agility, and the decrease in reaction speed and balance. Added to those are aging-related physiological changes, including the reduction of muscle bulk, increased body fat, decrease in total body water and basic metabolic rate as activities are reduced, and a decrease in cell and Lean Body Mass (LBM). These changes are known to cause problems. Interest and participation in appropriate physical activities among the elderly is needed to help them increase stamina, avoid diseases, maintain a clear intellect, and basically enable the elderly to live their daily lives as easy as possible. Therefore, physical activities are necessary for the elderly to enhance health-related factors. Special exercises should be performed for the enhancement of muscle function, muscle endurance, flexibility, agility, and balance. An accurate measurement of cardio-respiratory endurance and stamina through basic physical and cognitive characteristics of older adults is also required to ensure safety. Also, the development of a more scientific resistance exercise prescription system for the elderly is desperately needed.

• Journal of Environmental Health Sciences
• /
• v.23 no.1
• /
• pp.55-61
• /
• 1997

This study was executed for the purpose of investigation of the EMFs exposures of personal and electronic environment. This study examines ELF-EMFs of electric appliances, subways and occupational and non-occupational human exposures, using EMDEX II (for 40 - 800Hz, Enertech Consultant, Inc.), from October 1995 to March 1996. Among the electric appliances examined, a massage unit showed the highest mean value of 247.07 $\mu$T, followed by an electric blanket of 5.24 $\mu$T. Indoor levels of EMF in subways exceerlcd 0.2 $\mu$T of the Swedish Guideline. The mean personal exposure levels of occupational group were 0.18 $\mu$T, while the personal EMF level of non-occupational group were 0.07 $\mu$T. Occupational group were exposed more highly while at work. However, the EMF levels during nonwork and sleep exposures between occuptional group and nonoccupational group were about the same. Estimates of time-intergrated exposure indicated that utility-specipic job classifications received about one-half or more of their total exposure on the job. Finally, this study would provide significant data for future research for exposure to magnetic fields, and more detailed study and research are necessary.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.11
• /
• pp.1928-1935
• /
• 2015

Microbial growth kinetics is often used to optimize environmental processes owing to its relation to the breakdown of substrate (contaminants). However, the quantification of bacterial populations in the environment is difficult owing to the challenges of monitoring a specific bacterial population within a diverse microbial community. Conventional methods are unable to detect and quantify the growth of individual strains separately in the mixed culture reactor. This work describes a novel quantitative PCR (qPCR)-based genomic approach to quantify each species in mixed culture and interpret its growth kinetics in the mixed system. Batch experiments were performed for both single and dual cultures of Pseudomonas putida and Escherichia coli K12 to obtain Monod kinetic parameters (μ_max and K_s). The growth curves and kinetics obtained by conventional methods (i.e., dry weight measurement and absorbance reading) were compared with that obtained by qPCR assay. We anticipate that the adoption of this qPCR-based genomic assay can contribute significantly to traditional microbial kinetics, modeling practice, and the operation of bioreactors, where handling of complex mixed cultures is required.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3B
• /
• pp.153-160
• /
• 2007

Placing antennas of low power base stations below surrounding buildings, as in urban microcells, makes propagation characteristics strongly dependent on the building environment. As a result, propagation in these urban microcells is non-isotropic, so that the assumption of circular cells used in planning of conventional cellular sys toms is no longer valid. Assuming circular cells leads to a more conservative system design, implying more base stations. This work investigates the effect of cell shape, due to non-isotropic propagation, on the out-of-cell interference and Erlang capacity of CDMA system. Propagation is described by measurement derived models for low antennas in a rectangular urban street grid. The analysis is done for soft handoff protocols.

• Journal of Korean Critical Care Nursing
• /
• v.11 no.2
• /
• pp.51-62
• /
• 2018

Purpose : This study aimed to provide primary data for developing a program to enhance communication competence by identifying the patient-centered communication competency level of Intensive Care Unit (ICU) nurses and the related factors. Method : Data were collected from August 28th to October 8th, 2015, from 199 ICU nurses working in 30 tertiary hospitals. The study questionnaire included items assessing the patient-centered communication competency of ICU nurses, nursing organizational culture, types of communication, the Teamwork Measurement Tool, the Perceived Nursing Work Environment tool, and the Wong & Law Emotional Intelligence Scale. The collected data were analyzed using descriptive statistics, a correlation test, and a multiple regression. Results : The ICU nurses' mean score on patient-centered communication competency was 3.97 points. The factors influencing the patient-centered communication competency level of ICU nurses were professionalism (p =.002), innovation-oriented organizational culture (p =.015), and emotional intelligence (p<.001). These variables explained 42.2% of the total variance in the patient-centered communication competency of ICU nurses. Conclusion : These findings suggest the need for developing a patient-centered communication competency improvement program that focuses on improving ICU nurses' professionalism and emotional intelligence, and facilitates the creation of an innovation-oriented organizational culture.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.5
• /
• pp.522-526
• /
• 2015

Generally, underwater unmanned vehicle have adopted an inertial navigation system (INS), dead reckoning (DR), acoustic navigation and geophysical navigation techniques as the navigation method because GPS does not work in deep underwater environment. Even if the tactical inertial sensor can provide very detail measurement during long operation time, it is not suitable to use the tactical inertial sensor for small size and low cost UUV because the tactical inertial sensor is expensive and large. One alternative to INS is attitude heading reference system (AHRS) with the micro-machined electro mechanical system (MEMS) inertial sensor because of MEMS inertial sensor's small size and low power requirement. A cost effective and small size attitude heading reference system (AHRS) which incorporates measurements from 3-axis micro-machined electro mechanical system (MEMS) gyroscopes, accelerometers, and 3-axis magnetometers has been developed to provide a complete attitude solution for UUV. The AHRS based MEMS overcome many problems that have inhibited the adoption of inertial system for small UUV such as cost, size and power consumption. Several evaluation experiments were carried out for the validation of the developed AHRS's function and these experiments results are presented. Experiments results prove the fact that the developed MEMS AHRS satisfied the required specification.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.1
• /
• pp.53-65
• /
• 2012

Recently wireless intra-vehicle communication has received a great interest from the automotive industry and ultra wideband (UWB) technology is considered as one of the potential candidate for this system. Many research works have been done on the measurement and modeling of intra-vehicle communication channel. However, very little work has been reported for the performance analysis of various PHY layer methods under the intra-vehicle communication environment. This paper is to study IEEE 802.15.4a standard in intra-vehicle channel and to evaluate its performance. Channel model in chassis and engine compartment is considered for evaluation. Through simulation BER performance of system with different receiver structures is analyzed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.2
• /
• pp.213-226
• /
• 1993

The purpose of this study is to computerize the design of single source for a duct work system which is essential for the improvement of working places. There are different types of hood, such as general hood, push pull hood and canopy hood. And out of these three types, general hood and canopy hood were used as subjects of this study. The software used here was Quattro Pro 123 programm, and the hardware was IBM PS/SX(type 5510-SK4 S/N 83-05164). And the results are tabulated in