• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.164-179
• /
• 2014

The Buddhas of the Three Words in a form of arranging Bhaiṣajyaguru and $Amit{\bar{a}}bha$ at its side based on ${\acute{S}}{\bar{a}}kyamuni$ at the center is enshrined in Daeungbojeon Hall of Daeheungsa Temple located at Haenam. So far, this Buddhas of the Three Words has been known as a wooden Buddha statue. However, as a result of X-ray screening, in left/right Buddha statues excepting main Buddha, wood and molding clay layer were observed at the same time. Therefore, this study intended to observe its internal structure, grafting method and to clarify making technique of Buddha statue during Joseon era based on image information being obtained through X-ray screening of The Buddhas of the Three Words of Daeheungsa Temple. As its result, it was revealed that form of ${\acute{S}}{\bar{a}}kyamuni$ was completed by mainly grafting 5 pieces of timber and this statue shows a typical wood grafted Buddha statue during Joseon era. Form of Bhaiṣajyaguru and $Amit{\bar{a}}bha$ were completed based on molding technique by applying clay on sculpture similar to its appearance after sculpturing more than 10 pieces of timber through its grafting. In other words, internal timber is considered to play a role of its core and grafting method of timber is more close to a technique of molding Buddha statue than to that of wooden Buddha statue during Joseon era. However, clay was directly applied on timber thinly, not applying clay thickly on it after winding straw rope on wooden core and its characteristic is that its facial area was completely composed of wooden construction only. Therefore, it is hard to rule out a possibility that the original sculpturing intention of an artist might be a wooden Buddha statue but in view of the fact that a word, 'molding' was used in a record of relics buried in statue, it could be seen that this Buddha statue might have been recognized as a molding statue at the time when creation of this statue was completed. It is considered that number of case of making statue based on this technique would be more increased when more results of X-ray screening should be accumulated and if more data should be collected, it would provide a significant evidence for identifying chronological, regional aspects of making technique of Buddha statue.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.3
• /
• pp.193-217
• /
• 2022

The Wooden Seated Amitabha Buddha Triad and Altarpiece have not been the subjects of definitive species identification and scientific analysis. In this study, visual investigation, portable X-ray fluorescence (p-XRF), species identification, and lacquer layer observations were carried out to determine the original materials and conservation status. Cracks, exfoliation and discoloration were detected during the visual investigation. The p-XRF data indicated that chrome oxide green, malachite, gold, cadmium red, cinnabar, minium, hematite, lead white, ink stick (Carbon), and copper were used for pigments and the coronet accessory. Tilia spp., Abies spp., and Pinus spp. were identified from both the Buddha Triad and Altarpiece. Finally, lacquer layer analyses of the base layer, lacquer layer, orange pigment layer, and gold leaf layer observed modern synthetic pigments likely used in previous conservation. As the Korean Cultural Heritage Charter and the International Charter for the Conservation and Restoration of Monuments and Sites clearly state that objects of cultural heritage must be conserved using their original materials, future conservation of these objects should utilize the data obtained in this study to employ traditional materials. Furthermore, a deterioration map diagnosis can be applied together with the obtained analysis data to understand the conservation status of and inform an appropriate and authentic conservation treatment for the Buddha Triad and Altarpiece.

• Fashion & Textile Research Journal
• /
• v.8 no.6
• /
• pp.634-638
• /
• 2006

The significance of this study is the demonstration of a new method of preservation procedure for national-treasure-class cultural-assets by examining the characteristics of the Jeogori relic, presumed to be that of King SeJo, and validating the preservation process. This Jergori as well as the wooden Munsu-donja Buddha statue from which they were found are designated as national treasure. The Jeogori relic is made of light silk and dimensions mark 77 cm in length, 67 cm in width, and 94 cm in sleeve length. It is a typical Jeogori worn in the Chosun Dynasty. Preservation procedure was in the following order: Removing dust and pollutants by vacuum, washing, removing creases, reinforcing the clothes, settling at paulownia backboard, and packing. Storage and exhibition of remains was executed with as minimal folding as possible, and microbiological damage prevention was performed by dyeing antibacterial treatment with eugenol onto supporting cloth. The relic, conservatively treated in accordance with the above procedure, is currently kept at the storage facility of the citadel Museum in the Woljeong Temple. It is displayed annually to the general public for approximately two weeks.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.100
• /
• pp.112-138
• /
• 2021

This paper mainly analyzes the records titled 'Shijujil(施主秩)' from the Bokjangs of each of the Rocana and Shakyamuni statues enshrined as wooden seated Vairocana Buddha Triadcomposed of Vairocana(center), Rocana(right), and Shakyamuni(left) at the Daeungjeon Hall of Hwaeomsa Temple in Gurye. The Shijujil from the Shakyamuni statue was recovered through Bokjang investigation in September 2015 and has been kept in the museum of Hwaeomsa as an undisclosed relic. After the discovery of the Shijujil from the Rocana statue through an Bokjang investigation in July 2020, both of the Shijujils were only officially released through the special exhibition 'Grand Hwaeomsa Temple in Jirisan Mountain' in September 2021. Existing documents recording on the creation of Buddha statues in the 17th century are in the form of sheets or rolls. However, the Shijujils take the form of simple stitched booklets. The Shijujil from Rocana consists of 19 chapters and 38 pages in one book, and the Shijujil from Shakyamuni consists of 11 chapters and 22 pages in one book. The contents of the Shijujils consist of the purpose of the Buddha statue creation, the creation date, the year and place of enshrining, the names of the statues, the people in charge and their roles, the sculptors, the list of items donated, and the list of the contributors. In addition, the list of monks who were staying at Hwaeomsa Temple at that time are also recorded, so the Shijujil is like a time capsule that tells the situation of Hwaeomsa Temple about 400 years ago. According to the records of the Shijujils and the Writing on the wooden pedestal of Rocana, the Vairocana Triad began to be in March 1634(12th year of King Injo) and was completed in August of that year, and was enshrined in the Daeungjeon Hall in the fall of the following year. It is very important to confirm that the Vairocana Buddha Triad of Hwaeomsa was created in 1634. Since studies on the reconstruction of Hwaeomsa Temple in the 17th century and the roles of Byeokam Gakseong have been mainly based on 『湖南道求禮縣智異山大華嚴寺事蹟』 written by monk Haean in 1636, it has been estimated that the wooden seated Vairocana Buddha Triad was created in 1636. However, it is now known that the Virocana Buddha Triad was created in 1634. The Shijujils are also a good source of information about Byeokam Gakseong who played a pivotal roles in the reconstruction projects of Hwaeomsa Temple in the 17th century. He played leading roles in rebuilding the East Five-story Stone Pagoda(1630), in creating the wooden seated Vairocana Buddha Triad(1634), and in producing the Yeongsanhoe Gwaebul(1653, Hanging Scroll Painting depicting the Shakyamuni preaching). It is also very important that the Shijujils are records that can reveal the relationship between Byeokam Gakseong and royal family of Joseon Dynasty in the 17th century. The Shijujils from Rocana and Shakyamuni are the first documents ever discovered in which the names of royal family members, such as Uichanggun(Gwang Lee, son of King Seonjo), Ikseong Shin(son-in-law of King Seonjo), and Crown Prince Sohyeon(son of King Injo) are recorded in detail in relation to the production of Buddha statues. The Shijujils from Rocana and Shakyamuni contain specific information about the production of the wooden seated Vairocana Buddha Triad in the 17th century, such as the year of production of the Buddha statues, the role of Byeokam Gakseong, and the relationship between Byeokam Gakseong and the royal family, so it is of great value not only for art history but also for historical studies of Hwaeomsa Temple.

• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.562-577
• /
• 2020

In this study, to conserve the clay seated Vairocana Buddha triad in Seonunsa temple, Gochang (Treasure 1752), the primary materials employed for creating the clay Buddha statues were scientifically analyzed. By analyzing the soil layer constituting the Buddha statues, it is observed that the said layer comprises sand having particle size greater than that of medium sand and soil having particle size smaller than that of fine sand, which were used in a ratio of 7:3, along with the bast fibers of paper mulberry (Broussonetia kazinoki). Hence, the aforementioned soil layer is composed of a mixture of sand and weathered soil, along with bast fibers to prevent scattering. By analyzing the tree species, it is found that the wooden materials constituting the bottom board and the interior of Buddha's sleeves of the Amitabha Buddha statue, Vairocana Buddha statue, and Medicine Buddha statue are hard pines (Pinus spp.). Additionally, three layers are found in the cross section of the gold layer. Furthermore, each of the hair sections of the Buddha statues is composed of earthy materials such as quartz, albite, microcline, mica, and magnetite, and the hair surface was painted by incorporating black materials containing magnetite.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.246-263
• /
• 2019

The stone Buddha statue of Sangunsa Temple at Bukhansan in Goyang, Gyeonggi Province, is an excellent example of stone Buddha statues created in the late 15th century. On the base of the figure, there is an inscription, which informs that it was produced in 1497. In recognition of this significance, it was recently designated as a tangible cultural asset in Gyeonggi-do. Thus, this paper tried to evaluate the value of the statue by analyzing iconography and style. The characteristics of a typical 15th-century style that the Buddha statue of Sangunsa Temple shows are the form of ushnisha, the way clothes are worn, the form of a w-shaped chest muscle, and the simple lotus pedestal. On the other hand, the elongation of the waist and the disappearance of the waistband on undergarments are new forms of Buddha statues in the 16th century. Besides, parting the hair in the middle of the head and leaf-shaped short ribbon draped on undergarments are unique features that only appear on the statue of Sangunsa Temple. Sangunsa has been known to be built in the early 18th century based on Bukanji compiled by Seongneung in 1745, and Bongeunbonmalsaji composed in 1943. However, the statue was created in the late 15th century, before the establishment of the temple in the early 18th century. Therefore, this paper briefly reviewed the history of Sangunsa Temple, focusing on the initial period, referring to the historical sites and the relics that were passed on to the temple, as well as the literature records. The data newly referred to in the study are as follows: Sangunsa Stone Pagoda, presumed to be from the Goryeo Dynasty; the Stone Buddha Statue of Sangunsa; Wooden Amita Triad Buddha Statue of Sangunsa. According to the data and contrary to previously-held beliefs, Sangunsa Temple is believed to have been operating since the Goryeo Dynasty. It can be inferred through analysis of the stone Buddha statue of Sangunsa Temple that the size of the Temple before the 18th century was not very large.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.1
• /
• pp.66-79
• /
• 2018

Daejangjeon of Geumsansa Temple was built to store the Tripitaka Koreana, although it does not contain the Tripitaka at present and instead contains a Buddha Triad. According to Geumsansaji (Historical Record of Geumsansa Temple), this structure was originally a wooden pagoda. It is said that Geumsansa became a Buddhist temple due to its tradition of preserving a statue of Buddha and the Buddhist sutras. It is special that the Wooden Pagoda which keeps its ashes turned into a Daejangjeon. Also, it is symbolic that the Daejangjeon is symbolic and it does not store the stura, but this building is symbolic and complex. By analyzing the changes in the building process and religious beliefs, it is possible to ascertain the relationship between faith and religion in the latter phase of the Joseon Dynasty.

• Conservation Science in Museum
• /
• v.18
• /
• pp.35-50
• /
• 2017

As part of the NMK's research project on wooden Buddha statues, four items which contained fabric among their bokjang objects(腹藏物) were investigated. Firstly, when classified by the method of weaving, two items made of ra (羅, a four-end complex gauze) silk and five of neung(綾, twill damask) silk from the Goryeo era were identified, and the satin fabrics showing characteristics of the Joseon period were classified as either dan(緞, satin damask) or sa(紗, simple gauze). In particular, the fabric of the bokjang objects enshrined within the gilt-bronze Avalokiteshvara Bodhisattva(Deoksu 801) feature both early and late Joseon characteristics, suggesting that two enshrinements were performed(once in the fifteenth century and another in the seventeenth). Secondly, the patterns on the fabrics included flowers, treasures, fruits, plants with animals, and landscapes with clouds. Thirdly, patches of fabric were found that are assumed to be related with all cardinal directions according to their arrangement, albeit in small quantities.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.381-393
• /
• 2011

This study focus on the surface deterioration diagnosis based on the material characteristics of Taean Dongmunri Maaesamjonbulipsang(rock-carved standing triad Buddha Statue) and the weathering environment analysis. Rock materials of the triad Buddha is coarse-grained biotite granite which is composed mainly of quartz, K-feldspar, plagioclase, biotite and muscovite. The triad Buddha was serious surface irregularity(13.5%), exfoliation(12.3%) and discoloration(46.6%), and the physical characteristics using ultrasonic velocity appeared fourth grade (0.59, highly weathered). Korean style wooden shelter of the triad Buddha(closed type) maintained high humidity environment (daily mean; 86.6%) than exterior environment, and appeared the possibility of deterioration by freezing-thawing because the temperature showed below zero temperatures in winter. The shelter was changed from closed-type to open-type to relieve the moisture problem recently. But the moisture problem is yet to be solved because surface water flowing along northern wayside is flowed into triad Buddha. Therefore, environmental control will need to stop inflow of water into triad Buddha.

• Journal of Conservation Science
• /
• v.31 no.1
• /
• pp.1-11
• /
• 2015

Seated Amitabha Triad at Muwisa Temple (Treasure No. 1312) had been known as wooden Buddha statue, but a precise safety inspection revealed that the statue is terracotta Buddha statue made with clay. The clay layer of Amitabha Triad was conserved due to its severe damage. In this study, experiments were conducted to produce the most appropriate filler for the conservation treatment of the seated Amitabha Triad. Mixed clay samples with various ratios were produced and surface hardening state, crack, color change, and shrinkage of the samples during dry process were measured. Loess, fine sand powder, and cotton were used to produce the mixed clay for the filler with six different ratios and then 12 different concentration glues made with glutinous rice glue, Pachymeniopsis Elliptica glue, and animal glue were added as adhesives. Total 72 types of samples were prepared and comparative study was conducted. As a result, when the mixed clay contains 2.5% cotton compared to the weight per cent of loess and fine sand powder and also loess and fine sand in the mixed clay have a 15:1 ratio, the mixed clay had the lowest shrinkage. Animal glue is considered as an appropriate glue since it had small color change, low physical property change and shringkage. Therefore, mixed clay (loess:fine sand=15:1) mixed with 15ml animal glue is likely to be a suitable filler for conservation treatment of the seated amitabha triad at the Muwisa Temple.