In order to study the effect of sawdustboard combined with plastic chips, 0.5mm($T_1$), 1mm($T_2$), 1.4mm($T_3$) thick nylon fiber. polypropylene rope fiber(RP), and 0.23mm thick moth-proof polypropylene net fiber(NP) were cut into 0.5, 1, 2cm long plastic chips. Thereafter, sawdustboard combined with plastic chips prepared as the above and plastic non-combined sawdustboard(control) were manufactured into 3 types of one-, two-, and three layer with 5 or 10% combination level. By the discussions and results at this study, the significant conclusions of mechanical and physical properties were summarized as follows: 1. The MORs were shown in the order of 3 layer> 2 layer> 1 layer among plastic non-combined boards, and $T_3$ < $T_2$ < $T_1$ < RP (NP(5%) < NP(l0%) among plastic combined boards. In 2cm long plastic chip in 1 layer board, the highest strength through all the composition was recognized. 1 layer board showing the lower strength with 0.5cm plastic chip rendered to the bending strength improvement by 2 or 3 layer board composition. On the other hand, 2 or 3 layer combined with 1, 2cm long polypropylene net fiber chips incurred MOR's conspicuous decrease requiring optimum plastic chip combined level and consideration to combined type. 2. MOE in plastic non-combined 3 layer board exhibited sandwich construction effect by higher resin content application to surface layer in the order of 3layer>1layer>2layer with the highest stiffness of the board combined with polypropylene chip, while nylon chip-combined board had little difference from plastic non-combined board. In relevant to length and layer effect, 3 layer board combined with the 0.5cm long polypropylene net fiber chip in 5% and 10% combined level presented 34-43% and 44-76% stiffness increase against plastic non-combined board(control), respectively. Moreover, in 1 layer board, 30% stiffness increase with 10% against 5% combined level in the 1 and 2cm long polypropylene net fiber chip was obtained. 3. Stress at proportional limit(Spl) showing the fiber relationship (r: 0.81-0.97) between MOR presented in the order of 1 layer<2 layer<3 layer in plastic non-combined board. Correspondingly, combined effect by layer and plastic chip length was similar to MOR's. 4. Differently from previous properties(MOR, MOE, Spl). work to maximum load(Wml) of 2 layer board approached to that of 3 layer board. Conforming the above phenomenon. 2 layer combined with 0.5cm long polypropylene net fiber chip kept the greater work than 1 layer. The polypropylene combined board superior to nylon -and plastic non - combined board seemed to have greater anti - failing capacity. 5. Internal bond strength(IB), in contrast to MOR's tendency. showed in the order of T1
해남 대흥사 대웅보전에는 석가모니불을 중심으로 좌우에 약사불과 아미타불을 배치한 형식의 석가삼세불상이 봉안되어 있다. 그동안 이 삼세불상은 목조불로 알려져 왔으나 X-선 촬영 결과, 본존불을 제외한 좌우불에서 나무 위에 입힌 소조층이 함께 관찰되었다. 따라서 대흥사의 삼세불상은 조선시대 목조불상 및 소조기법이 적용된 불상을 함께 살펴볼 수 있는 좋은 사례가 될 수 있을 것이다. 조선시대 접목조불상의 전형을 보여주고 있는 본존 석가모니불상은 크게 5개의 목재를 접목하여 형상을 완성하고 있으며, 약사와 아미타불은 10개 이상의 목재를 접목하여 외형에 가깝도록 조각한 뒤 그 위로 점토를 발라 소조기법으로 형상을 완성하고 있다. 즉 내부의 목재가 심(芯)의 역할을 한다고 할 수 있는데, 목재의 접목방식이 조선시대의 목조불상보다는 소조불상의 기법에 가깝다. 그러나 목심 위에 새끼줄을 감고 그 위에 점토를 두껍게 바른 것이 아니라 나무 위에 직접 점토를 얇게 발랐으며, 얼굴 부분이 완전히 목조로만 이루어진 것이 특징적이다. 이와 같은 이유로 애초 작가의 조성의도가 목불이었을 가능성도 배제할 수 없으나 복장기록에 '소성(塑成)'이라는 단어가 사용된 것으로 보아 불상 조성이 완료된 시점에 이들 불상을 소조상으로 인식했음을 알 수 있다. 즉 대흥사 좌우불은 조선시대식 소조기법의 한 예로 보아도 좋을 것이라 생각한다. 따라서 본 논문에서는 대흥사 삼세불상의 X-선 촬영을 통해 얻은 화상정보를 바탕으로 이들 불상의 내부구조와 접목방식을 살펴보고 이를 통해 조선시대 불상 제작기법을 밝혀보고자 하였다.
본 연구는 조경전문잡지인 '환경과 조경'의 광고 내용 분석을 통해 조경산업의 전반적인 구조를 알아보고 조경시설물의 변화 및 요인을 분석하였다. 이를 바탕으로 향후 조경시설물 행보의 방향제시 및 기초자료로 제시하고자 하였다. '환경과 조경' 창간호부터 30년 간 게재된 광고를 분석한 결과 옥외시설물이 1,853회의 빈도수를 보이고 있으며 이중 휴게시설이 1,475회, 편익시설이 378회로 나타났다. 옥외시설물의 광고 빈도수가 다른 조경시설물에 비해 월등히 광고 빈도가 높은 이유에는 주택건설 관련 정부정책의 영향을 많이 받았으며, 공공디자인으로의 업역 확장과 더불어 휴게시설물 시장의 확대에 연유함을 알 수 있었다. 또한 휴게시설물의 주요 재료에는 퍼걸러와 벤치 모두 목재와 철재가 대부분을 차지하고 있었으며 퍼걸러의 경우 지붕재의 종류로 경제적 측면과 내구성 측면을 고려한 폴리카보네이트가 가장 많이 사용되었다. 조경분야의 대표 잡지에 실린 광고를 대상으로 조경시설물의 흐름을 통시적으로 분석하여 시대별 동향, 시설물 유형별 디테일 변화를 파악하고자 하였다.
Background: Despite the increasing role of dry forests in climate change adaptation and mitigation, these versatile resources has got less attention in the national and regional planning, their potential to enhance the local and national economy has been overlooked, and their contribution to sustainable environmental management has not been recognized. Hence, the objective of this study was to assess the socioeconomic contribution of dry forests and forest products to climate change adaptation in the Liben Woreda, Southern Oromia region of Ethiopia. Methods: For this study, an integrated qualitative and quantitative approach was used. A total of 74 households from villages in the Bulbul, Boba, and Melka-Guba kebeles were randomly selected for the household survey. Results: Results showed that 75% of the respondents in the area indicated that climate change has become their major sources of vulnerability, where drought has been manifested in the form of crops failure and massive death of livestock particularly cattle species. The main income strategies of the study households include livestock, crop, forests such as gum and resins, firewood and charcoal and non-farm activities such as in the form of petty trade, wage and aid. The average total household income was ETB 11,209.7. Out of this, dry forest income constituted 15% of the total income. In addition to using dry forests as rangeland for livestock, the communities collect wood for construction, fodder, traditional medicine, and forest food both for subsistence and for sale. On the other hand, dry forest products could be considered as less vulnerable, rather resilient livelihood strategies to climate- and environment-related risks compared to livestock and crop production such as in the face of drought periods. More than 48.6% of the households argued that the income generated from dry forests increased substantially due to increment in the level of engagement of family members in forest based income activities. On the other hand, 35.8% of the households responded that livestock production, particularly camels and goats, have been making the livelihood strategies of the respondents more resilient indicating the shift made from grazers browsers to livestock. In general trends show that, the trends of livelihood dependency on dry forest were highly increasing indicating the importance of dry forest income in responsse to frequent droughts. Conclusions: Dry forest income has been becoming crucial livelihood staretgy in response to frequent droughts in the study area and hence, it is important to improve the management of dry forests for livelihood enhancement, while also securing their long-term ecological functions.
In this study, we attempted to seek out the ways to recycle fresh root-chips in the slope revegetation works by breaking tree root wastes occurring during the construction works, also to review the applicability of fresh root-chips as the soil media in slope revegetation works. For this purpose, we organized test units in order to investigate on-site applicability of fresh root-chips (broken chips). In order to examine the desirable ration of combining fresh root-chips with the hydroseeding soil media on the cutting slopes, we organized test units depending on the amount of combination. The following is the main experimental results. 1. At first, we analyzed properties of hrdro-seeding soil media and soil of the experimental sites. The overall results demonstrate that all the test units show proper range for vegetation. 2. We believe that the physical properties of soils in the earlier phase of restoration works on the sloped sites are not greatly affected by the fact whether broken chips exist or not. However, as time elapses, broken chips needs to be investigated further on what kind of impact they have on the soil condition. 3. More species are found in the test unit combining broken chips and we believe that it will contribute to blossoming of green plants and ecological succession of neighboring plants. 4. We performed experiment on possibility for fresh root-chips as substitutes for the hydro-seeding soil-media. In the test unit that combines fresh root-chips, its mixture ratio tends to exceed that of the test unit that does not combine fresh root-chips by 5 %. In case of the Thick-Layer-Soil-Media Hydroseeding works, the mixture ratio of the test unit that combines fresh root-chips after 16 weeks exceeds that of the test unit that does not combine fresh root-chips by 75%. 5. From the result of our experiment, it is obvious that the ratio of mixture and the number of emerging species are higher for the test unit combining fresh root-chips than the test unit that does not combine them. In other words, we can replace the hydro-seeding-soil-media with some Fresh root-chips without affecting the physical property of soil.
이 연구에서는 4종의 삼나무, 스프러스, 나왕, 레드파인 시험편을 콘칼로리미터(Cone calorimeter, ISO 5660-1, 2)와 연기밀도시험기(ASTM E 662)를 이용하여 연소성을 시험하였다. 그 결과, 삼나무가 착화시간이 가장 빨랐고 평균열방출율($HRR_{mean}$)이 $58.52kW/m^2$으로 가장 낮게 나타났다. 그리고 레드파인의 평균열방출율($HRR_{mean}$)이 $71.75kW/m^2$으로 가장 높게 나타났다. CO 발생량에서는 나왕과 삼나무가 가장 많이 발생하였고, 반대로 $CO_2$ 발생량에서는 레드파인과 스프러스가 가장 많이 발생하였다. 동적방법에서의 총연기방출율은 레드파인이 연기가 가장 많이 발생하였고, 스프러스가 가장 적게 발생하였다. 정적방법에서의 연기밀도는 레드파인이 훈소(Non-flaming) 방식과 불꽃(Flaming) 방식에서 가장 높았다. 나왕은 훈소(Non-flaming) 방식에서 2번째로 연기가 많이 발생한 데 반하여 불꽃(Flaming) 방식에서는 가장 적게 발생한 것을 알 수 있었다. 열방출율 측면에서 화재위험성은 4가지 시험편 중 레드파인이 가장 높았다. 연기발생 관점으로 보아도 동적인 방식과 정적인 방식 모두 레드파인이 화재 위험성이 가장 높은 재료였다.
본 연구의 목적은 1998년 보은 지역에서 발생한 산사태와 관련 자료간의 공간적인 관련성을 밝히고, 이를 이용하여 산사태 취약성도를 작성 및 검증하는 것이다. 산사태 위치는 항공사진 및 현장조사를 통해 탐지되었고, 지형, 토양, 임상, 토지 피복 둥의 자료는 GIS를 이용하여 공간 DB로 구축되었다. 산사태 발생과 관련된 요인으로써, 경사, 경사방향, 지형곡률, 지형종류, 토질, 토양모재, 토양배수, 유효토심, 임상, 임상 영급, 임상 경급, 임상 밀도, 암상, 선구조로 부터의 거리, 토지 피복 등이 사용되었다. 산사태와 이러한 요인들간의 관계를 밝히기 위해, 베이지안 확률 기법인 weight of evidence 기법이 적용되어서 >$W^{+}$->$W^{-}$인 constrast값을 계산하였다. 그 constrast값을 모두 합하여 산사태 취약성 지수를 계산하였고, 그 지수값을 이용하여 산사태 취약성도를 작성하였다. 산사태 취약성도는 관련된 재해를 줄이고, 토지이용 및 건설 등을 계획하는데 사용될 수 있다.
본 연구는 인삼재배 해가림 시설의 실태를 조사하여 시설의 구조 및 환경 공학적인 특성을 분석하고, 개선 방안을 도출하여 환경조절형 인삼재배시설의 개발을 위한 기초자료 제공을 목적으로 하였다 6개 인삼 주산지를 대상으로 현장실측 및 설문조사를 수행하였으며, 그 결과를 분석하여 뼈대구조의 재질에 따라 목재시설과 철재시설로 분류하고, 기둥과 서까래의 연결방식에 따라 전후주연결식과 후주연결식으로 분류하였으며, 도리와 보조도리의 세부구조에 따라 프레임식과 케이블 식으로 구조를 유형화하였다. 시설구조의 실측조사결과 기둥과 서까래는 대부분 표준 규격 이상의 단면을 사용하고 있었으나, 도리와 보조도리는 규격 미달이 많았고 이를 전혀 설치하지 않은 경우도 상당수 있어 이 부분에 대한 보강이 필요한 것으로 판단되었다. 시설의 폭과 높이, 기둥의 설치간격 등은 대체로 표준형과 비슷한 규격으로 설치하는 경향이었으나 편차가 크고, 구조적으로 취약한 부분도 상당수 있으므로 자재의 규격화와 시공 및 조립방법의 표준화가 필요하고, 폭설에 대한 대책과 보강설계가 가장 중요한 구조개선 사항으로 판단되었다. 환경관리 부분에서는 관수기준 설정 연구가 시급하고, 가장 힘들고 시간이 많이 소요되며 기계화 및 자동화가 요구되는 작업은 해가림 시설의 설치인 것으로 조사되었다. 따라서 설치비가 저렴하고 구조적으로 안전하며, 작업성이 양호한 동시에 환경조절 이용이한 인삼재배시설의 개발이 필요할 것으로 생각 되었다.
본 연구는 건축 재료(마감재)로 쓰이고 있는 목재 나무류 미송, 나왕, 삼나무, 소나무 등4종의 구조와 연소특성을 연구하였다. 착화특성을 보면 착화시간(TTI)범위가 21 s~32 s으로나타났으며 특히 소나무는 TTI가 21 s로 다른 재료들보다 비교적 빠른 601 s에 착화되어 631 s에 소멸되었다. 최대열방출율과 평균열방출율은 소나무 > 나왕 > 삼나무 > 미송 순으로 나타내었다. 총열방출량은 나왕 > 미송 > 소나무 > 삼나무 순이었다. 총연기방출량은 소나무가 $424.80m^2/m^2$, 나왕 $185.93m^2/m^2$이었다. 탄소배출량은 미송이 1,460 s에서 0.185 kg/kg CO 최대값을 보이고 $CO_2$ 값은 750 s에서 15,986 kg/kg으로 최대값을 보이다 3,090 s에서 정지되었다. 향후, 건축 재료로서 화재의 안전성을 평가하기 위한 기초 자료로 활용하는 방안을 제시하였다.
본 연구는 건축용 자재인 목재 및 플라스틱의 연기 위험성 평가에 대하여 새로 고안된 연기성능지수-V (smoke performance index-V, SPI-V), 연기성장지수-V (smoke growth index-V, SGI-V), 연기위험성지수-VI (smoke risk index-VI, SRI-VI)를 중심으로 조사하였다. 시험편은 가문비나무, 나왕, polymethylmethacrylate (PMMA), polycarbonate (PC)를 사용하였다. 연기 특성은 콘칼로리미터(ISO 5660-1) 장비를 사용하여 시험편에 대하여 측정하였다. 연소반응 후 측정된 연기성능지수-V는 PMMA를 기준으로 1.0~3.4로 나타났다. 연기성능지수-V에 의한 연기위험성은 PC, 가문비나무, 나왕과 PMMA 순서로 증가하였다. 나왕과 PMMA는 유사한 값으로 나타났다. 연기성장지수-V는 PMMA를 기준으로 1.0~9.2로 나타났다. 연기성장지수-V에 의한 연기위험성은 PMMA, PC, 가문비나무, 나왕의 순서로 증가하였다. 모든 시편의 CO 피크 발생속도는 0.0021~0.0067 g/s로 측정되었다. 결론적으로 연소가 용이한 물질은 연기성능지수-V가 낮고, 연기성장지수-V가 높기 때문에 화재로 인한 연기위험성이 높은 것으로 이해된다. 이는 총괄적으로 연기위험성지수-VI로 정리된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.