• Journal of the Korean Society of Environmental Restoration Technology
• /
• 제13권1호
• /
• pp.47-56
• /
• 2010

The main objectives of this comparative study were 1) to quantify the potential contribution of wood chips to revegetation on the cut slope in a constructed area, 2) to compare the floristic similarity of species composition whether existing of wood chips in the soil media or not. Wood chips were combined with soil media in the ratio of 30%. The thin layer (1 cm, 3 cm) soil media revegetation methods and the thick layer (10 cm) soil media revegetation method were constructed on the cut slopes by machineries respectively. Also, comparative experiments the existence of wood chips in the soil media were conducted to evaluate the effects of wood chips on revegetation works. The total size of quadrat was $300m^2$ ($100m^2{\times}3$). The results of monitoring for 3 years on cut slopes were as follows: 1) All the quadrat existed in the proper range for vegetation. 2) Species richness of quadrat including wood chips was 10% more than those of commercial soil medias. 3) The coverage rates of quadrat including wood chips were similar or superior to those of conventional methods. It can be concluded that the use of wood chips would be effective to promote establishment of diverse landscape and vegetation. However, it behooves to continue monitoring on succession of vegetation for ecological restoration. Finally, adequate wood chips deposit and gathering methods should be studied properly.

• Journal of the Korean Wood Science and Technology
• /
• 제43권2호
• /
• pp.196-205
• /
• 2015

The aim of this study was to evaluate the fuel characteristics of thermally treated wood chips of the Larix kaempferi C. As torrefaction temperature was increased ($200^{\circ}C$ to $300^{\circ}C$), the carbon content, calorific value, and mass loss of torrefied wood chips increased significantly. The torrefied wood chips were shown to have hydrophobic properties even when only treated by mild torrefaction. The energy required to grind torrefied wood chips was reduced by the torrefaction process. Different sizes of wood chips were used in this study; however, this produced almost no difference in the fuel characteristics of processed Larix kaempferi C, except in the distribution of ground wood particles. Similar results were observed when the wood chips were torrefied for different lengths of time (15 min to 60 min) at a constant temperature. Torrefaction was shown to have positive effects on the fuel characteristics of Larix kaempferi C, including improved energy density, storage, and grindability.

• Journal of Animal Environmental Science
• /
• 제5권1호
• /
• pp.17-22
• /
• 1999

This experiment was conducted to determine the influence of litter type on growing performance of broiler and litter characteristics. Sawdust, wood chips and solid part of cattle manure was used as a litter from 7 to 42 days of broiler age. The body weight was significantly (p<.05) higher in manure solid than those of sawdust and wood chips. The litter production was 2,134, 2,246 and 1,785g per bird on the sawdust, the wood chip and the manure solid during 35 days, respectively. Although the initial moisture contents of the litter materials were different 23.5% for sawdust, 16.26% for wood chips and 61.57% for cattle manure solids, the moisture were different 23.5% for sawdust, 16.26% for wood chips and 61.57% for cattle manure solid, the moisture contents became similar after 28 days of the experimental period. The nitrogen content of manure solid was higher than those of sawdust and wood chips. It was concluded that solid part of cattle manure and wood chips were potentially useful source of litter materials for broiler.

• Journal of the Korean Recycled Construction Resources Institute
• /
• 제7권3호
• /
• pp.77-84
• /
• 2012

It is known that some components of wood obstruct the hydration of cement when wood is mixed with cement. In order to examine the effect of pretreatment of wood chips in hot water, this study conducted the experiments for the setting and compressive strength of mortar by sieving pine wood chips with a 2.4mm sieve, dipping them in waters of different temperatures, and then using them as a part of the fine aggregate. For the experiments, water-cement ratio of the mortar was 0.50 and the amount of the fine aggregate substituted by wood chips was set at 0%, 2%, 4%, 6%, 8%, and 10% of the mass of the fine aggregate. As a result of the test, it was found out that when wood chips were used to substitute fine aggregate for the production of mortar, more usage of wood chips postponed setting more, and the treatment of wood chips with water improved the problem of the delay in setting time. Especially, the final setting time of the mortar which used 2~6% of wood chips treated in $100^{\circ}C$ water for 30 minutes was almost the same as the final setting time of the mortar which used no wood chips. Also, the compressive strength of the mortar which used the wood chips treated with water was compared to that of the mortar which used the wood chips not treated with water. The result showed that the strength improved for age of 7 days and 28 days, while there was little change in strength for age of 3 days.

• Journal of the Korean Wood Science and Technology
• /
• 제43권2호
• /
• pp.186-195
• /
• 2015

This study aims at modeling the rotary drying of wood chips in co-current mode and estimating the drying time of larch (Larix kaemferi) wood chip. Drying data were obtained in a lab. scale fixed bed dryer operating with an air velocity of 1 m/sec. and at hot air inlet temperatures of $100^{\circ}C$, $200^{\circ}C$, and $300^{\circ}C$. The lab. scale fixed-bed drying rates for small, medium and large size larch wood chips that had been dried from 40% wet-based moisture content (MC) to 10% MC at $200^{\circ}C$ drying temperature were 17.3 %/min., 10.2 %/min. and 5.5 %/min., respectively. It was predicted that larch large size wood chips could be dried from 40% MC to 10% MC in about 23.0, 34.6, and 44.7 minutes at $300^{\circ}C$, $200^{\circ}C$ and $150^{\circ}C$, respectively. Expected drying times for medium size chips were about 8.6, 11.2 and 13.2 minutes and those for small size chips were 4.3, 5.5 and 6.4 minutes, respectively.

• Journal of the Korean Society of Combustion
• /
• 제4권2호
• /
• pp.11-22
• /
• 1999

Combustion characteristics of the wood chips(balsa chips) were experimentally investigated with respect to the thermal recycle system of the urban waste. The urban waste contains plastics, vegetable and wood materials. Wood was chosen as an example of the one of the component of urban dust. A small wood chip was burned in a electric furnace by the micro-electric balance. The mass reduction rate was normalized by the initial mass of test piece and the time of volatile combustion end. When the mass of the wood chips(balsa chips) was larger than 0.5g, the combustion similarity was found on the normalized mass reduction rate.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제46권spc호
• /
• pp.31-38
• /
• 2023

In this study, in order to develop a method to efficiently inject essential nutrients necessary for plant growth into wood chips, which are simply used as soil covering materials in the agriculture, landscaping and horticultural industries, the atmospheric pressure dipping method and the vacuum pressure impregnating method are used to improve the plant nutrients injectability and impregnation amount were comparatively analyzed. Nutrient ingredients and 8 major heavy metal contents of wood chips injected with nutrients were analyzed, and soil covering effects were examined by covering wood chips injected with nutrients on soil. Comparing the dipping method and the vacuum pressure impregnation method, it took about 48 hours or more to inject 1,500 g or more of the nutrient aqueous solution into 1 kg of wood chips in the dipping method, but the vacuum pressure impregnation method could be impregnated in about 5 minutes. Components of the impregnated nutrients were detected in proportion to the diluted concentration. As a result of covering the wood chips developed in this study on soil, they showed weakly acidic pH, and the heat insulation and moisturizing effects during the winter season were evaluated to be superior to those of uncovered soil. In the future, wood chips impregnated with nutrients are expected to contribute to the more efficient use of waste wood resources and the long-term supply of nutrients essential for plant growth, reducing excessive use of chemical fertilizers and reducing costs.

• Journal of the Korean Society of Industry Convergence
• /
• 제2권2호
• /
• pp.139-146
• /
• 1999

Combustion Characteristics of the wood chips(balsa chips) were experimental studied as fundamental investigation of the thermal recycle system of the urban dust. The urban dust contains plastics vegetable and lot of wood material. Then, a wood was chosen as an example of the component of urban dust. A small wood chip was burned in a electric furnace and mass reduction rate during volatile and combustion states were recorded by the micro-electric balance and the combustion flame shape took a photograph by video camera at the mass of wood chips and ambient temperature in the furance. Ignition delay took the minimum value when the mass of the test chip was 0.3g. When a mass of the test chip was smaller then 0.001g, combustion with flame did not burnt.

• Journal of Korean Society of Forest Science
• /
• 제98권4호
• /
• pp.426-434
• /
• 2009

This study was carried out to derive the most optimal production process for the wood fuels(chip and pellet), by collecting cost data on each procedure through the life cycle assessment approach, and to compare between the profitability and efficiency, from the view points of producers and consumers, irrespectively. The costs accounted in this analysis were based on the opportunity cost. The results show that wood chips are cheaper than wood pellets in production costs. In respect to the process with the lowest production cost, while wood chips should be to crush collected residues into pieces on the spot for merchandizing, wood pellets need to be transported to manufactory for pelletizing. The study findings also include that the profits, which is estimated by subtracting expenses from gained sale revenue, were a bit higher for wood chips than wood pellets. Additionally, the price ratio of wood pellets to wood chips for getting the same caloric value appears to be 1.27. Despite of economic benefits of processing wood chips, there are several problems in practice. For producers, there is a possible increase in not only transportation cost for conveying crushers to the dispersed places, but storage cost due to the lack of the marketplaces in the immediate surroundings. For consumers, on the other hand, there are some challenging issues, such as bulky storage facility requirement, additional labor for fuel supplement, frequent ashes disposal, and decomposition in summer and freezing in winter caused by wood chips' own moisture.

• Journal of Forest and Environmental Science
• /
• 제25권1호
• /
• pp.75-84
• /
• 2009

This study was conducted to investigate the physical properties of wood chip for fuel processing with woody biomass. Seven species are selected and processed for testing physical properties by 3-type wood chippers which are commonly used in Korea. Wood chips produced by self-propelled drum chipper and fixed type wood chipper equipped with separator were uniform in size and shape. It was shown that the bulk density of produced wood chips was decreased with increasing the wood chip layer thickness, and oak chips prepared by self-propelled drum chipper and fixed type wood chipper showed the highest bulk density.