• Journal of the Korean Wood Science and Technology
• /
• v.48 no.5
• /
• pp.666-675
• /
• 2020

This study investigated mechanical characteristics of pine trees in Yeongdong (Goseong-gun), Yeongseo (Hongcheon-gun), and Yeongnam (Bonghwa-gun) to define differences in the material quality among pine trees of the three regions. The compressive strength, hardness and shear strength of pine trees of each region were measured. There were no differences in the compressive strength of the juvenile woods among the regions, while the heartwood and sapwood in Bongwha generally showed the highest compressive strength followed by those in Hongcheon and in Goseong. The hardness of the cross-section of pines in Bonghwa was the highest, and in terms of the hardness of the radial and tangential sections, pines in Goseong topped the list.. There were no difference among heartwoods of each region in terms of the shear strength, but, but sapwood from Bonghwa had higher shear strength than those of the other two regions, which may be attributed to differences in tracheid length and microfibril angle among pines in each region. This study identifies the quality differences among pines of different region, and therefore, is expected to add value by helping choose the domestic pine tree material effectively and selectively, and also select a plus tree.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.53-63
• /
• 2005

This study attempted to obtain the basic data of utilizable possibility of preservative treated wood as a material used in a marine ranch. To evaluate the leaching stability of CCA-, CCFZ-, and ACQ-treated woods in seawater, the specimens treated with 2% and 3% (w/v) of CCA, CCFZ, and ACQ were exposed to deionized water, synthetic seawater and natural seawater for 41 days and then each component released was periodically determined. There was little amount of copper and chromium released from CCA-treated wood exposed in both deionized and seawater. Although relatively large amount of arsenic was released from CCA-treated wood, the release rate in seawater was lower than that in deionized water. The release rate of chromium and zinc from CCFZ-treated wood were somewhat greater in deionized water, but lower in seawater than in deionized water. Retention level and salinity of synthetic seawater had little effect on the release rate of components. The ACQ-treated wood had greater copper release than CCA- and CCFZ-treated wood, and the amount of copper released did not affected by leaching media used.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.2
• /
• pp.117-126
• /
• 1997

In fast grown softwood, there are very large changes in material properties going outward from the pith to bark such as anatomical, physical and mechanical characteristics. Some of variations in anatomical properties with annual ring were then examined from Pinus koraiensis, Larix leptolepis, and Chamaecyparis obtusa, which are major softwoods of plantation in Korea. The large variations of annual ring width during young age of tree tended to stabilize after 25year through the transitional period in 17~23year. The ring density was 1.5~2.4 in 1~10year period, and 3.5~6.3 in 30~35year period, in which juvenile and mature wood were certainly assumed to be formed, respectively. Variations of tracheid length showed functional relationships with annual rings as logarithm. Demarcation between juvenile wood and mature wood could be 16~19year, which was determined from increase rate of tracheid length of 0.2%. Cell wall thickness increased with increase of annual ring even though large variations were observed as well. Variations of cell wall thickness within species were pronounced in latewood than earlywood. The increase of cell wall thickness from juvenile wood to mature wood was predominant in Larix leptolepis as 2.0times, and least in Chamaecyparis obtusa as 1.1 times. Cell diameters showed trends of increase during young age of 1~15year, and consistent afterward. The variations of cell diameter between radial and tangential direction were greater in latewood, and most pronounced in Chamaecyparis obtusa.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.68-75
• /
• 2015

We conducted a thermal compression of domestic Korean pinewood for a use in flooring. For the evaluation of flooring material, we measured dimensional stability and surface hardness of thermally compressed wood. It is possible to make high-specific gravity woods with a range of 0.82-0.92 after the thermal compression with 50% compression set. The surface hardness increased with an increase in the pressing temperature. The highest value of surface hardness was $23.6N/mm^2$, which was obtained from the thermal compressed wood with pressing temperature of $160^{\circ}C$ and 30 minutes of pressing time. However, the surface hardness of woods treated at high temperature of $180^{\circ}C$ or greater decreased. The recovery of thickness decreased with increasing the pressing temperature. For dimensional stability, compression temperature was more dominant than compression time.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.244-250
• /
• 2014

This study was conducted to identify wood species of 72 wooden parts (pillar, beam, jangyeo, purlin, judu, soro, bracket, deagong, ceiling panel, etc.) used for Daewungjeon Hall in the Woonsoosa Temple, Busan in Korea. Identified wood species were 67 Pinus spp. (Kesiya group), 4 Carpinus spp. and 1 Quercus spp. (Cerris group). In pillars, 14 red pines and 4 Carpinus and in purlins, 4 red pines and 1 Cerris were found. Other elements were red pines. Carpinus woods, which were used for the lower portions of three pillars (Dongbari), seemed repaired parts. A carved wood used for the stand of Buddhist statues was identified as Alnus spp. This study showed that Daewungjeon Hall of the Woonsoosa Temple was made mostly of red pines.

• Journal of the Korea Furniture Society
• /
• v.27 no.2
• /
• pp.80-90
• /
• 2016

The idea of Sustainable, first mentioned in "Our Future (Bruntdland)" from the United Nations report released in 1987 has been highly affect design disciplines in developed countries in 21st century. It relocated industrial society and structure's attentions to nature and recourse conservation and reuse. Designed and manufactured products eventually disposed and it leads to waste of resources as well as creates environmental issues. Unfortunately, vast majority of designers starts designing without anticipation of this matter and produce more believing this leads to more sales. However shorter life of a product will create bigger increase of resource consumption and waste than, importance of re-usage and recycle will eventually increase. In modern furniture industry metal and plastics are frequently used beside wood that material has been diverse than in past. However, there are lack of plans and regulations of re-usage of those material due to difficulties of separating each different materials and collecting due to it's size. This study would like to look into recycling rate, methods and usage of three major materials (wood, metal, plastic) that is typically used in current furniture industries. Furthermore, see the potential of sustainable furniture by analyzing furniture practices made by each different recycled material from old furniture and what designers should consider to achieve feasibility of sustainable furniture.

• The monthly packaging world
• /
• s.268
• /
• pp.82-85
• /
• 2015

• The monthly packaging world
• /
• s.171
• /
• pp.62-63
• /
• 2007

• The monthly packaging world
• /
• s.151
• /
• pp.106-121
• /
• 2005

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.1
• /
• pp.12-18
• /
• 2013

Existing wood decks brings out negligent accident because fastener can be pulled-out by cyclic load of pedestrians. When deck and joist are connected, it also causes the problems, which are cracking of wood decks and rapid decay by material of fastener. In this study, strength property of deck unit using reinforced plastic connector made by domestic A company was evaluated. Southern yellow pine (Pinus palustris Miller) were used for deck material. Bending strength of deck units were implemented for fastener type and joist spacing (400, 600 mm). In the result, carbon steel screw into reinforced plastic connector was the best in average bending strength(Joist spacing : 400, 600 mm). In the result of bending strength for joist-width (40, 50, 70, 80 mm), the average maximum bending strength was measured when the joist spacing was 40 mm.