• Fire Science and Engineering
• /
• v.28 no.2
• /
• pp.20-25
• /
• 2014

In this study, the extinguishing performance evaluation of wetting agent for wood crib was conducted by using a scale model equipment that we designed. To confirm the optimal conditions of the experiment, a test was changed amount of fire extinguishing water and the number of timber. As a result, the discrimination of the fire extinguishing performance was seen only when 20 pieces of wood and the extinguishing water of 100 mL were used. After evaluating the extinguishing performance of domestic and foreign wetting extinguishing agents under these conditions, a reignition was occurred in only when we used water. In addition, the discrimination of extinguishing performance was seen through the temperature distribution according to the time of watering. Based on the results of this experiment, this study is expected to be able to use as a basis on presenting a method of optimized performance evaluation of wetting extinguishing agent.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.2
• /
• pp.61-70
• /
• 1994

This study was executed to find the applicability of press drying of tree disk by investigating the shrinkage and drying defect and to form appropriate model by comparing the actual moisture content(MC) and internal temperature in respect of drying time with calculated values based computer simulation to which was applied finite difference method. In press drying disk, heating period, constant drying rate period maintained plateau temperature at 100$^{\circ}C$ and falling drying rate period were significantly distinguished. Actual MC and internal temperature were analogous to those calculated at comparing points. Heat transfer model formed by Fourier's law using specific heat of moist wood and conduction coefficient considering fractional volume of each element of wood cell wall, bound water, free water and air showed applicability as basic data to developing heat expansion, shrinkage and drying stress during press drying. Also mass transfer model formed by Fick's diffusion law using water vapor diffusion coefficient showed applicability. Longitudinal shrinkage was developed by pressure of hot press and tangential shrinkage was restrained by hygrothermal recovery. The heart check, surface check and ring failure were occurred differently in species, but V-shaped crack didn't develop.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.77-87
• /
• 2008

Wooden model erosion control dam was made with pitch pine, of which the strength properties was evaluated. Wooden model erosion control dam was made with diameter 90 mm of pitch pine round posts treated with CUAZ-2 (Copper Azole), changing joint in three different types. In each type, erosion control dam was made in nine floor (cross-bar of five floors and vertical-bar of four floors), of which the hight was 790 mm. And then strength properties were investigated through horizontal loading test and impact strength test, and the deformation of structure through image processing (AICON 3D DPA-PRO system). In horizontal loading test of wooden model erosion control dam using round post of diameter 90 mm, whether there was stone or not did not affect strength much when using self drill screw, but strength was decreased by 23%. In monolithic type of erosion control dam using screw bar, strength was increased by 1.5 times and deformation was decreased when filling with stone. When reinforcing with screw bar that ring is connected to self drill screw, strength was increased by 4.8 times. In impact strength test of wooden model erosion control dam made with round post of diameter 90 mm, the erosion control dam connected with self drilling screw not filling with stone was totally destroyed by the 1st impact, and the erosion control dam using screw bar was ruptured at cross-bar at which 779 kgf of impact was loaded in the 1st impact. In the 2nd impact, the base parts were ruptured, and reaction force was decreased to 545 kgf. In the 3rd impact, whole base parts were destroyed, and reaction force was decreased to 263 kgf.

• Journal of Korean Society of Forest Science
• /
• v.105 no.3
• /
• pp.330-335
• /
• 2016

This study was conducted to derive merchantable volume ratio for 5 major species such as Pinus Densiflora (Central Region). The data used for this study was from at least more than 1,300 trees of research data throughout the country. the study applied two estimation equations, which were the estimation equation for wood volume ratio representing total wood volume to total tree stem volume and the estimation equation for merchantability representing ratio of merchantable volume to total wood volume. The merchantable volume ratio was derived by multiplying those two estimation equations. In order to gain wood volume ratio(W) from DBH, $W=\frac{a_1}{1+a_2/D}+\frac{b_1}{1+b_2/D}$ model was used. Fitness index of it was more than 99% by species, and other test statistics also indicated the suitability of this equation enough. Merchantability (M) for wood volume applied $M=e^{a_1\(\frac{d}{D}\)^{a_2}}-(b_0+b_1D+b_2D^2+b_3D^3)$ model and fitness index was more than 96% by species. Merchantable volume ratio was assessed using those two estimation equations by each 5 species, and constructed a merchantable volume ratio table. In result, merchuntable volume ratio was little difference between stand types, but there was slightly different with the existing standard such as conifers of 85% and non-conifers of 70%.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.847-860
• /
• 2020

This study was conducted into combustion characteristics and gases generated by the combustion of charcoal and agglomerated charcoal distributed in the domestic using a combustion chamber based on the average space per crater of a charcoal-grilled restaurant in South Korea. Each of the three types of charcoals and agglomerated wood charcoals was analyzed for fuel and combustion characteristics. In addition, the concentration changes of CO, CO₂, NO_x, and O₂ were measured for 20 minutes depending on ventilation. As a result, CO yield without ventilation was measured in the range of 1390 to 4703 ppm, and CO yield with ventilation decreases about 29.8% to 57.4%. CO₂ yield without ventilation was measured in the range of 1.34% to 2.42%, and CO₂ yield was about 44.1% to 53.6% when the emission was more than about 1.5% at 10 minutes. The NOx yield was divided into two cases where the NO_x yield was continuously increased because of incomplete combustion, emitted ranging from 29 ppm to 47 ppm, and where emission was constant after 1 minute in the range of 9 ppm to 18 ppm. The NO_x yield with ventilation tends to be similar to the without ventilation, and NO_x yield decreases up to 62.5%. Therefore, it could be used for health risk assessment with the simulation of the usage environment of charcoal and agglomerated wood charcoal.

• Journal of Korean Society of Forest Science
• /
• v.99 no.6
• /
• pp.802-807
• /
• 2010

The objective of this study was to estimate potential of domestic long-term wood supply by using fuzzy linear programming (FLP). In order to construct a numerical formula model, maximization of total timber production was used for the objective function. Size limit of harvesting and sustained yield were used as the constraints. The results of comparison between LP and FLP were shown that LP is more suitable than FLP in terms of the amount of timber production and final forest stock. However, as long-term sustained yield was limitedly achieved by using LP, FLP was more desirable for prediction of potential wood supply. According to the results of this study, the potential of annual domestic wood supply was estimated about 10.5 million cubic meters. Gyeong buk, Jeon nam, Gangwon and Gyeong nam province were highly ranked in order of provincial potential of wood supply.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.1
• /
• pp.44-52
• /
• 2012

This study examined the effects of the drying rate, temperature distribution and vapor pressure on the surface checks occurring during the air circulating oven-drying of hollowed short Japanese larch (Larix Kaemferi C.) round posts treated with coating (CO) and vapor-dam (VD). The hollowed round posts could be dried from the green condition to a moisture content of approximately 8% in 72 to 144 hours. The temperature in the hole was higher than that inside of wood for Control and VD specimens, while VD specimen showed opposite distribution. The vapor pressure inside the wood was higher than that in the hole for the CO and VD specimens during hole drying stage. There were few surface checks found in the specimens but the number increased in order the of CO, VD and Control specimens.

• Journal of agriculture & life science
• /
• v.50 no.5
• /
• pp.173-182
• /
• 2016

This study was aimed to identify the phenotypic relationships between calving interval and lactation curve parameters in Korean Holstein cow. The data of 36,505 lactation records was obtained from the Dairy Herd Improvement program run by Dairy Cattle Improvemnet Center of National Agricultural Federation of Korea. All lactation records were collectied from the multiparous cows calving between 2011 to 2013. The estimated lactation curves were drawn using Wood model based on actual milk yield records, and NLIN Procedure of SAS program (ver. 9.2). General linear multivariate models for calving interval, 305-d milk yield, lactation parameters(A, b, c), persistency, peak day, and peak yield included fixed effects of calving year-season (spring, summer, fall and winter) and parity(2, 3 and 4). For calving interval, 305-d milk yield, lactation parameters(A, b, c), persistency, peak day and peak yield, all two fixed effect(calving year-season, parity) were significant(p<0.05). The estimated lactation functions using Wood model for 2, 3, and 4 parity were yt=24.66t0.175e-0.00302t, yt=24.69t0.192e-0.00334t, and yt=24.22t0.200e-0.00341t, respectively. Phenotypic correlation (partial residual correlation) between calving interval and 305-d milk yield, A, b, c, persistency, peak day, and peak yield were 0.093, -0.014, 0.028, -0.046, 0.099, 0.085, and 0.052, respectively. To conclude, if calving interval increase then ascent to peak, persistency, peak day and peak yield are increase, and descent after peak is decrease. So, total 305-d milk yield is increase.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.884-889
• /
• 2015

Appropriate evaluation of thermal insulation property of structural member and valid control of cooling/heating energy are important for improving building's energy efficiency. The typical heating system of house in Korea is the floor heating one. The radiation heating system is not only appropriate to climate and geographic conditions of Korea, but also advantageous to provide emotional comfort by the warm feeling of floor. Based on living conditions in Korea, scaled models of the wooden house and concrete house were designed. The ceiling was made of styrofoam insulation and the four sided walls and bottom were made of plywood and concrete, respectively. The floor was heated by heating film. Indoor vertical temperature distributions by floor heating system were measured by thermocouple, and surface temperatures on walls were measured by infrared thermography. Also, thermal insulation property of wooden wall was evaluated to build database for improving energy efficiency of wooden building. It is expected that collected data during tests of various types of floor and wall composition could be referenced for evaluating thermal environment of actual conditions of houses.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.4
• /
• pp.13-19
• /
• 1998

Stress relaxation tests have been performed under five different tensile strain levels and five different bending strain levels. Three different theoretical models have been developed based on four-element Burger's model, viscoelastic theory and viscous-viscoelastic theory. Experimental data were used to obtain parameters of the models and to verify accuracy of the models. Among the three theoretical models developed in this study, three-integral model (Model 3) based on viscous-viscoelastic theory showed the most exact estimations of stress relaxation under both tensile and bending strains and their correlation coefficients were greater than 0.99 for all the strain levels. Model 1 showed little initial stress relaxation. Model 2 showed excessive initial relaxation and, then, no relaxation after about 20 minute of strain application. Stress retention under strain decreased as strain increased, which means increased stress relaxation as strain increases. When the strain level was less than proportional limit, the effect of strain level on stress relaxation was not clearly shown. However, this effect was increased as strain level increased when strain level was greater than proportional limit.