• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.370-371
• /
• 2005

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 춘계공동학술발표회요약집
• /
• pp.303-303
• /
• 2002

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.587-591
• /
• 1997

The DGs (Diesel Generators) in NPP (Nuclear Power Plant) has been used for the emergency electric power source to shut down the nuclear reactor safely in case of station blackout. The RCM (Reliability Centered Maintenance) has been applied to DGs for increasing the safety of NPP. The structured defects of DG were not remedied by the improvement of maintenance method. As the first stage of RCM, to find the structured defects, its failure modes were searched and analyzed through the ten year maintenance information. The structured defects such as the air compressor, the lubricating oil pressure, and the insufficient load were the root causes of main failures. The air reservoir reinstallation, the lubricating oil tube modification, the load bank installation, and the qualitative instrumentation were the solutions for the hardware oriented RCM of DGs. There remains the software oriented RCM such as the rejection of useless maintenance, the preventive maintenance, the database of maintenance information, and the predictive maintenance.

• 동력기계공학회지
• /
• 제13권1호
• /
• pp.53-58
• /
• 2009

The emergency diesel generator(EDG) of the nuclear power plant is designed to supply the power to the nuclear reactor on Station Black Out(SBO) condition. The operation reliability of onsite emergency diesel generator should be ensured by a conditioning monitoring system designed to monitor and analysis the condition of diesel generator. For this purpose, we have developing the technologies of condition monitoring for the wolsong unit 3&4 standby diesel generator including diesel engine performance. In this paper, technologies of condition monitoring for the wolsong standby diesel generator are described about three step. First is for selection of operating parameter for monitoring. Second is for technologies of online condition monitoring, Third is for monitoring of engine performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.28-34
• /
• 2001

월성2호기가 100% 출력 운전중 2001.4.6일 20:16분에 345kV 신경산변전소 GIS모선#1측 지락고장 파급으로 주발전기 정지중 기동시 보호 용계전기(50/27)가 동작되어 발전정지 되고 원자로 출력은 60%까지 감발 되었음. 본 보호계전기는 발전기 정지나 터닝기어로 저속운전 중 인적 실수에 의해 발전기 병입용차단기 투입시 발전기가 과도한 돌입전류로 손상되는 것을 방지하기 위한 계전기로, 정상운전중이거나 외부사고시에는 동작할 수 없는 보호계전기임. 따라서 본 보호계전기의 동작원인을 당시 동작 상황과 기록데이터를 정정치와 함께 분석하고 적정동작을 위한 대책을 제시함.

• Nuclear Engineering and Technology
• /
• 제45권4호
• /
• pp.459-468
• /
• 2013

During a station blackout (SBO), the initiating event is a loss of Class IV and Class III power, causing the loss of the pumps, used in systems such as the primary heat transporting system (PHTS), moderator cooling, shield cooling, steam generator feed water, and re-circulating cooling water. The reference case of the SBO case does not credit any of these active heat sinks, but only relies on the passive heat sinks, particularly the initial water inventories of the PHTS, moderator, steam generator secondary side, end shields, and reactor vault. The reference analysis is followed by a series of sensitivity cases assuming certain system availabilities, in order to assess their mitigating effects. This paper also establishes the strategies to mitigate SBO accidents. Current studies and strategies use the computer code of the Integrated Severe Accident Analysis Code (ISAAC) for Wolsong plants. The analysis results demonstrate that appropriate strategies to mitigate SBO accidents are established and, in addition, the symptoms of the SBO processes are understood.

• Nuclear Engineering and Technology
• /
• 제32권1호
• /
• pp.1-9
• /
• 2000

Delayed hydride cracking (DHC) velocity and threshold stress intensity factor for DHC ($K_{IH}$) tests in the radial direction on M11 pressure tube material in Wolsong unit 1 were carried out following the Atomic Energy Canada Limited (AECL) standard test procedure in order to identify the effect of undercooling on DHCV and to acquire the $K_{IH}$ data. The results showed that $K_{IH}$ 's were 8.8$\pm$0.8 MPa√m in the back offcut and 11.4$\pm$0.7 MPa√m in the front offcut. The fact that $K_{IH}$ in the front offcut is about 20% higher than that in the back offcut is attributed to the microstructural difference between the materials of the front and back ends. $K_{IH}$ 's in M11 pressure tube appeared to be higher than the values from the tubes made of double melted ingot reported earlier. This can be interpreted by the fact that very small amounts of Chlorine (Cl) and Phosphorus (P) are contained in the ingot and that the content of the harmful elements in the M11 pressure tube is equivalent to that made of a quadruple melting process. DHC velocities at 25$0^{\circ}C$ in the front offcut in the radial direction are measured to be 5~8$\times$10$^{-8}$ m/s. The results show that the prior thermal history change the DHC velocity significantly. This effect was confirmed by the experiment of undercooling prior to the DHC tests.DHC tests.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.177-186
• /
• 2021

Radioactive materials from nuclear power facilities can be released into the atmosphere through various channels. Recently, the dispersion of radioactive materials has become critical issue in Korea after Kori Unit 1 and Wolsong Unit 1 were permanently shut down. In this study, annual atmospheric dispersion factors were compared based on the continuous release and purge release using the XOQDOQ computer program, a method for calculating atmospheric dispersion factors at commercial nuclear power stations. The meteorological data analyzed in this study was based on the Shin Kori nuclear power meteorological tower which has the largest operating nuclear power plants in Korea, for three years (from 2008 to 2010). The analysis results of the dispersion factor of the radioactive material release obtained using the XOQDOQ program showed that the difference between the continuous release and purge release was within two times. This study will be valuable helpful for revealing the uncertainty of the predictive atmospheric dispersion factor to achieve regulation.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.217-224
• /
• 1997

The safety related equipments for use in nuclear power plants should be subjected to the seismic qualification in order to insure the safety of the nuclear power plant. This paper summarizes the seismic qualification test on the Low Voltage Motor Control Centers(MCC's) for use in Wolsong Nuclear Power Plants, Units 2, 3 and 4. The seismic qualification test was performed on the two prototype MCC's(a two-bay wide unit for Phase #1 Test and a five-bay wide unit for Phase #2 Test). The specimens were electrically powered and monitored during the test process. It was demonstrated that the specimens possessed sufficient structural and electrical integrity to withstand the required seismic conditions.

• 비파괴검사학회지
• /
• 제19권2호
• /
• pp.93-99
• /
• 1999

월성 1호기 원전의 경우에, 사용후 핵연료 저장조 공간을 확보하기 위해서 약 7년 동안 저장조에서 냉각된 사용 후 핵연료를 건식저장고로 매년 이송하고 있다. 년간 2개월이 소요되는 핵연료 이송은 국제원자력기구와 국가의 핵물질 계량 관리검사를 위한 많은 인력과 비용을 필요로 하는 공정이다. 사용후 핵연료 일련번호 확인은 고방사선장인 약 6m 깊이의 저장조속에서 진행되어야 하므로 검사 장비의 유지와 운영이 어렵다. 이 조건에서 CANDU형 사용후 핵연료 다발 일련번호를 확인할 수 있는 장치를 설계 제작하여, 국가 안전 조치 검사현장에 적용하였다. 본 육안검사 장치는 간단한 조작에 의해 수조속의 사용후 핵연료 다발 일련번호를 한정된 검증 시간내에 정확히 읽을 수 있었고, 간편하게 운영될 수 있었다. 안전 조치 검사관은 본 장치를 이용하여 검증 활동을 효과적으로 수행할 수 있는 검사 장비인 것으로 평가되었다. 본 육안검사 장치는 일련번호 확인의 정확성과 재현성 그리고 운영상의 편리성 둥에서 기존 장치에 비해 좋은 결과를 보여주었다.