• Advances in concrete construction
• /
• 제12권6호
• /
• pp.479-490
• /
• 2021

Present research is mainly focused on, microstructural and durability analysis of Graphene Oxide (GO) in Wollastonite (WO) induced cement mortar with silica fume. The study was conducted by evaluating the mechanical properties (compressive and flexural strength), durability properties (water absorption, sorptivity and sulphate resistance) and microstructural analysis by SEM. Cement mortar mix prepared by replacing 10% ordinary portland cement with SF was considered as the control mix. Wollastonite replacement level varied from 0 to 20% by weight of cement. The optimum replacement of wollastonite was found to be 15% and this was followed by four sets of mortar specimens with varying substitution levels of cementitious material with GO at dosage rates of 0.1%, 0.2%, 0.3% and 0.4% by weight. The results indicated that the addition of up to 15%WO and 0.3% GO improves the hydration process and increase the compressive strength and flexural strength of the mortar due to the pore volume reduction, thereby strengthening the mortar mix. The resistance to water penetration and sulphate attack of mortar mixes were generally improved with the dosage of GO in presence of 15% Wollastonite and 10% silica fume content in the mortar mix. Furthermore, FE-SEM test results showed that the WO influences the lattice framework of the cement hydration products increasing the bonding between silica fume particles and cement. The optimum mix containing 0.3% GO with 15% WO replacement exhibited extensive C-S-H formation along with a uniform densified structure indicating that calcium meta-silicate has filled the pores.

• 한국세라믹학회지
• /
• 제38권12호
• /
• pp.1180-1186
• /
• 2001

고진공 저항 가열식 증발 증착기를 이용하여 약 1$mu extrm{m}$ 두께의 W $O_3$-Sn $O_2$박막 가스센서를 제작하였다. 50$0^{\circ}C$에서 4시간동안 공기중 열처리한 다음, 제조된 박막의 결정성과 미세구조를 관찰하였다. 100 ppm의 산화성 가스인 N $O_2$와 환원성 가스인 CO 가스에 대한 가스 감응 특성을 측정한 결과, N $O_2$가스에 대한 감도( $R_{gas}$/ $R_{air}$)는 기판온도 25$0^{\circ}C$에서 W $O_3$박막이 약 1000으로서 가장 높았으며, CO 가스 감도는 기판온도 15$0^{\circ}C$~25$0^{\circ}C$ 범위에서 약 0.25로 가장 양호하였다.하였다.

• 대한환경공학회지
• /
• 제27권9호
• /
• pp.970-977
• /
• 2005

소각장 off gas에 장기간 노출이 되어 활성이 저하된 상용 $V_2O_5-WO_3/TiO_2$ 촉매를 대상으로 증류수 및 산성용액에 의한 초음파 세척과 촉매환성성분인 $V_2O_5$, $WO_3$의 재함침을 수행하여 촉매를 재제조 하였다. 촉매의 특성 분석을 통해 재제조된 촉매의 물성변화를 확인하였고 질소산화물(NOx) 전환반응 실험을 수행하여 촉매활성변화를 고찰하였다. 본 연구에서 적용된 실험조건에서 증류수 초음파 세척을 통해 재제조된 촉매의 경우 촉매의 NOx 전환활성이 fresh 촉매의 NOx 전환활성의 $66{\sim}93%$ 수준까지 회복되었고 초음파 세척시간이 3분 이상이 되었을 때 최대의 촉매활성을 나타내었다. 산성용액 초음파세척에 의해 재제조된 촉매의 경우 촉매의 NOx 전환활성이 fresh 촉매의 NOx 전환활성의 $81{\sim}97%$ 수준까지 회복되었고 질산 및 황산용액 모두 용액의 pH가 5이였을 때 최대의 활성을 나타내었다. 촉매활성성분인 $V_2O_5$, $WO_3$ 재함침에 의해 재제조된 촉매의 경우 촉매의 NOx 전환활성이 fresh 촉매의 NOx 전환활성의 $87{\sim}100%$ 수준까지 회복되었고 재함침된 $V_2O_5$의 양이 1 wt % 이상이었을 때 최대의 활성을 나타내었다. 특히 이 경우 저온 온도영역인 $150^{\circ}C$에서 촉매의 환성이 fresh 촉매의 NOx 전환활성의 97% 수준까지 회복되는 것을 알 수 있었다.

• 대한환경공학회지
• /
• 제22권4호
• /
• pp.609-617
• /
• 2000

본 연구에서는 소각로용 SCR(Selective Catalytic Reduction) 촉매개발의 일환으로, 소각로 배기가스 중에 다량 함유되어 있는 염화수소 (HCl) 기체가 촉매활성에 미치는 영향에 관하여 고찰하였다. 연구에 사용된 촉매는 상용 $V_2O_5-WO_3/TiO_2$ 촉매와 구리이온이 교환된 모더나이트형 제올라이트, CuHM 촉매로 실험은 수분의 유무에 따라 건조가스 조건과 습윤가스 조건으로 나누어 수행하였다. 건조가스 조건에서는 염화수소농도가 증가함에 따라 CuHM 촉매의 NO 제거활성이 가역적으로 증가하는 반면 $V_2O_5-WO_3/TiO_2$ 촉매는 비가역적으로 저하되는 상반되는 결과를 보였다. 그리고 수분이 포함된 습윤가스 조건에서는 CuHM와 $V_2O_5-WO_3/TiO_2$ 촉매 모두 비가역적으로 활성이 감소됨이 관찰되었으나, 상대적으로 CuHM이 보다 안정적인 활성을 나타내었다. 이러한 활성변화는 $NH_3$ TPD(Temperature Programmed Desorption) 탈착곡선의 증가, 감소로부터 HCl에 따른 일시적인 산량 증가 또는 영구적인 산점의 변화와 관계됨을 알 수 있었다. 그리고 BET 및 ICP 분석을 통하여 염화수소기체에 의한 촉매의 표면적과 $Cu^{{+}{+}}$ 및 $V_2O_5$ 함유량의 변화를 관찰하였다. 이상의 연구결과로부터 HCl과 같은 산가스를 함유하고 있는 배기가스 중의 질소산화물을 제거할 경우 CuHM 촉매에 대한 선택적 촉매 환원공정의 적용 가능성을 확인할 수 있었다.

• 센서학회지
• /
• 제24권1호
• /
• pp.15-21
• /
• 2015

Transparent and conductive multilayer thin films consisting of three alternating layers FZTO/Ag/$WO_3$ have been fabricated by radio-frequency (RF) sputtering for the applications as transparent conducting oxides and the structural and optical properties of the resulting films were carefully studied. The single layer fluorine doped zinc tin oxide (FZTO) and tungsten oxide ($WO_3$) films grown at room temperature are found to have an amorphous structure. Multilayer structured electrode with a few nm Ag layer embedded in FZTO/Ag/$WO_3$ (FAW) was fabricated and showed the optical transmittance of 87.60 % in the visible range (${\lambda}=380{\sim}770nm$), quite low electrical resistivity of ${\sim}10^{-5}{\Omega}cm$ and the corresponding figure of merit ($T^{10}/R_s$) is equivalent to $3.0{\times}10^{-2}{\Omega}^{-1}$. The resultant power conversion efficiency of 2.50% of the multilayer based OPV is lower than that of the reference commercial ITO. Asymmetric D/M/D multilayer is a promising transparent conducting electrode material due to its low resistivity, high transmittance, low temperature deposition and low cost components.

• 열처리공학회지
• /
• 제7권3호
• /
• pp.169-174
• /
• 1994

The reaction layer formed at interface between matrix and fiber has significant effects on the mechanical properties and behaviors of deformation m FRM. In this study, the mechanical properties and interfacial behaviors according to surface finishing on the fibers and according to heat treatment in FRM were investigated. FRM was fibricated by diffusion bonding method. In W/Al alloy composite and W/Al composite, W of which was coated with $WO_3$, the heat treatment was carried out thermal cycling method from 373K to 673K. In W/Al composite, W of which was coated with $WO_3$, growth of interface layer was hardly occured in spite of the increasing various thermal cycles. It was exhibited that oxidized W/Al composite were higher strength than non-oxidezed W/Al composite with the increasing thermal cycles. The compounds of fiber/matrix interface were analyzed into $WAl_{12}$, $WAl_7$, and $AlWO_3$, respectivly. Therefore the interfacial compounds of fiber/matrix seriously affected the mechanical properties and behaviors of deformation in FRM.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.247-256
• /
• 2024

The glass series modified by tungsten oxide was created using the compounds (75-x) B₂O₃- 10SrCO₃- 8TeO₂- 7ZnO - xWO₃, where x = 0, 1, 5, 10, 22, 27, 34, and 40% mole percentage. A UV-visible spectrophotometer and thermogravimetric-differential thermal analysis (TG-DTA) methods were employed to characterize the specimen's optical and phase transition attributes, respectively. The mass-attenuation coefficient (AC) of all created glasses from BSTZW0 to BSTZ7 was estimated using Geant4 code from 0.05 to 3 MeV and compared to the XCOM software results, with a relative difference of less than 2% between the two results. The increase of WO₃ percentage lead to an increase in the Linear-AC at each studied energy, and this is mainly due to the fact that the higher the percentage of WO₃ in the glass increases its density which causes an increase in the Linear-AC, so an energy of 0.06 MeV, as an example, the values of the Linear-AC was 4.009, 4.509, 5.442, 6812, 8.564, 9.856, 10.999 and 11.628 cm^-1 form BSTZW0 too BSTZW7, respectively. The Half-VL (value layer), Mean-FP (free path), Tenth-VL, and Radiation attenuation performance (RAP) were also calculated for the current BSTZW-glass samples and revealed that BSTZW7 had the best gamma ray attenuation performance at all discussed energies when compared to other studied glass samples.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.825-828
• /
• 1998

The X-ray spectra dependence for intensifying screens of medical radiography was investigated through analysis of the absorbed coefficiency($\mu$), absorbed efficiency(${\eta}_{\alpha}$) and absorbed ratio(R). It was found that the absorbed coefficiency was increased in the order of $CaWO_4$$CaWO_4$ screen showed the highest value.

• 한국분말재료학회지
• /
• 제11권2호
• /
• pp.111-117
• /
• 2004

The oxidation behavior of 91 WC-9Co hardmetal in weight percentage has been studied in the present work as a part of the development of recycling process. The morphological and compositional changes of the WC-Co hardmetal with oxidation time at 90$0^{\circ}C$ were analyzed by using surface observation and X-ray diffraction. respective]y. As the oxidation time increased, the WC-Co hardmetal was continuously expanded to form porous oxide mixtures of $CoWO_4$ and $WO_3$. The morphology of porous oxide mixture was basically dependent on initial shape of the WC-Co hardmetal. From thermo-gravimetric (TG) analysis, it was found that the oxidation rate was increased with increasing oxidation temperature and oxygen content in the flowing atmospheric gas. The fraction of oxidation versus time curves showed S-curve relationship at a given of oxidation temperature. These oxidation behaviors of the WC-Co hardmetal were discussed in terms of previously proposed kinetic models.

• International Journal of Computer Science & Network Security
• /
• 제23권8호
• /
• pp.204-209
• /
• 2023

Dynamic Bandwidth Allocation (DBA) methods in telecommunication network & systems have emerged with mechanisms for sharing limited resources in a rapidly growing number of users in today's access networks. Since the DBA research trends are incredibly fast-changing literature where almost every day new areas and terms continue to emerge. Co - citation analysis offers a significant support to researchers to distinguish intellectual bases and potentially leading edges of a specific field. We present the visualization based analysis for DBA algorithms in telecommunication field using mainstream co-citation analysis tool-CiteSpace and web of science (WoS) analysis. Research records for the period of decade (2009-2018) for this analysis are sought from WoS. The visualization results identify the most influential DBA algorithms research studies, journals, major countries, institutions, and researchers, and indicate the intellectual bases and focus entirely on DBA algorithms in the literature, offering guidance to interested researchers on more study of DBA algorithms.