• YAKHAK HOEJI
• /
• v.51 no.3
• /
• pp.219-227
• /
• 2007

Ginsenoside Rgl (Rgl), the pharmacologically active constituent of ginseng (Panax ginseng C.A. Meyer), has a variety of biological activities. The present study was undertaken to evaluate a possibility of Rgl whether it can be used in treatment or prevention of stress disorders. Animals were stressed by immobilization for 2 hours or electroshocks for 20 minutes. The normal group was not exposed to any stress. Rgl was subcutaneously injected as dosages of 5 and 10 mg/kg and red ginseng (RG) was orally administered 200 mg/kg as the positive control. Animals were given supplements for 5 days without stress, and then were given supplements for 5 days with stress. We recorded stress-related behavioral changes of experimental animals using the Etho-vision system. Weight of adrenal gland and levels of corticosterone in plasma were measured and stress related behaviors (smelling, grooming, face washing, rearing) were observed. Rgl didn't make significant behavioral changes in total open field and elevated plus maze test. Rgl did not influence on behavioral changes induced by electroshock stress. Whereas, 10 mg/kg of Rgl alleviated the increment of the freezing and face washing time and the decrement of the smelling and rearing time induced by restraint stress. The administration of Rgl 10 mg/kg has significantly increased the endurance time on rotating rod and swimming pool tests compared to the control group. These results indicate that Rgl can alleviate the damage induced by physical stress. This result suggests that Rgl may bea new candidate for treating stress related disorder.

• Resources Recycling
• /
• v.20 no.2
• /
• pp.45-53
• /
• 2011

We devised a procedure for the recovery of silicon and tempered glass from waste photovoltaic (PV) modules using optimized conditions. The tempered glass was recovered without any damage using organic solvents. The surface material is removed by applying an acid solution on the surface of the PV cell. Through our proposed method, we offer a much more efficient approach for recycling solar cells with a surfactant than the conventional method. This process, we obtained pure silicon with a yield of 90% by chemical treatment with the surfactant at room temperature for 18 min. The silicon yield was characterized using an inductively coupled plasma-atomic emission spectrometer.

• Journal of Veterinary Clinics
• /
• v.28 no.1
• /
• pp.13-19
• /
• 2011

Semen cryopreservation induces the formation of reactive oxygen species (ROS), and the ROS cause sperm damage. We aimed to investigate the effects of the antioxidative enzyme catalase (CAT) on sperm quality and ROS during cryopreservation. Sperm rich fractions collected from five Duroc boars were cryopreserved in freezing extender with (200 or 400 U/mL) or without CAT (control). After thawing, sperm motility, viability, normal morphology, plasma membrane integrity, mitochondrial function and intracellular ROS were evaluated. CAT significantly improved total sperm motility at a concentration of 400 U/mL (P < 0.05), but didn't improve progressive sperm motility, viability, morphological defects, plasma membrane integrity and mitochondrial function in frozen-thawed boar sperm. In evaluation of ROS, CAT had no effect on reduction in ${\cdot}O_2$, but scavenged $H_2O_2$ in viable frozen-thawed boar sperm at concentrations of 200 and 400 U/mL (P < 0.05). In conclusion, CAT was not enough to improve quality of frozen-thawed sperm, but can reduce $H_2O_2$ generation in viable boar sperm during cryopreservation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.457-457
• /
• 2010

Flexible organic light emitting diodes (F-OLEDs) requires excellent moisture permeation barriers to minimize the degradation of the F-OLEDs device. Specifically, F-OLEDs device need a barrier layer that transmits less than $10^{-6}g/m^2/day$ of water and $10^{-5}g/m^2/day$ of oxygen. To increase the life time of F-OLEDs, therefore, it is indispensable to protect the organic materials from water and oxygen. Severe groups have reported on multi-layerd barriers consisting inorganic thin films deposited by plasma enhenced chemical deposition (PECVD) or sputtering. However, it is difficult to control the formation of granular-type morphology and microscopic pinholes in PECVD and sputtering. On the contrary, atomic layer deoposition (ALD) is free of pinhole, highly uniform, conformal films and show good step coverage. Thus, $Al_2O_3/TiO_2$ multi-layer was deposited onto the polyethersulfon (PES) substrate by electron cyclotron resonance atomic layer deposition (ECR-ALD), and the water vapor transmission rates (WVTR) were measured. WVTR of moisture permeation barriers is dependent upon density of films and initial state of polymer surface. A significant reduction of WVTR was achieved by increasing density of films and by applying low plasma induced interlayer on the PES substrate. In order to minimize damage of polymer surface, a 10 nm thick $TiO_2$ was deposited on PES prior to a $Al_2O_3$ ECR-ALD process. High quality barriers were developed from $Al_2O_3$ barriers on the $TiO_2$ interlayer. WVTR of $Al_2O_3$ by introducing $TiO_2$ interlayer was recorded in the range of $10^{-3}g/m^2.day$ at $38^{\circ}C$ and 100% relative humidity using a MOCON instrument. The WVTR was two orders of magnitude smaller than $Al_2O_3$ barriers directly grown on PES substrate without the $TiO_2$ interlayer. Thus, we can consider that the $Al_2O_3/TiO_2$ multi-layer passivation can be one of the most suitable F-OLEDs passivation films.

• Journal of Aquaculture
• /
• v.18 no.1
• /
• pp.37-44
• /
• 2005

This study was conducted to compare the physiological conditions of black porgy (Acanthopagrus schlegeli) when reared in freshwater (0 psu) and seawater (35 psu) during 90 days. In terms of stress response, there was no significant difference in cortisol levels of the fish reared either freshwater or seawater until 60 days. Although cortisol level of fish reared in freshwater(12.6$\pm$5.0 ng/ml) was significantly higher than in seawater (4.5$\pm$2.9 ng/ml) at the end of experiment, these values were stable levels as compared with that of non-stressed fish. No significant differences in plasma osmolalities were recognized between the fish reared in freshwater (346.7$\pm$4.6$\~$356.5$\pm$2.1 mOsm/kg) and seawater (350.0$\pm$2.0$\~$357.0$\pm$22.6 mOsm/kg). Normal structure of gill lamellae without histological damage or cell necrosis has been observed in the fish reared in freshwater. In connection with growth and survival rate, total length and body weight of fish reared in freshwater were slightly longer and higher than those of fish reared in seawater. Survival rate of black porgy reared in freshwater was slightly higher than that of fish reared in seawater, but there was no significant difference. The results suggest that black porgy is reared with normal growth rate in freshwater without stress.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.275-280
• /
• 2005

We propose a new approach to greatly simplify the fabrication of conventional nanoimprint lithography (NIL) by combined nanoimprint and photolithography (CNP). We introduce a hybrid mask mold (HMM) made from UV transparent material with a UV-blocking Cr metal layer placed on top of the mold protrusions. We used a negative tone photo resist (PR) with higher selectivity to substrate the CNP process instead of the UV curable monomer and thermal plastic polymer that has been commonly used in NIL. Self-assembled monolayer (SAM) on HMM plays a reliable role for pattern transfer when the HMM is separated from the transfer layer. Hydrophilic $SiO_2$ thin film was deposited on all parts of the HMM, which improved the formation of SAM. This $SiO_2$ film made a sub-10nm formation without any pattern damage. In the CNP technique with HMM, the 'residual layer' of the PR was chemically removed by the conventional developing process. Thus, it was possible to simplify the process by eliminating the dry etching process, which was essential in the conventional NIL method.

• Journal of the Korean Ceramic Society
• /
• v.39 no.10
• /
• pp.928-934
• /
• 2002

Gallium doped Zinc Oxide(GZO) films were deposited by dc magnetron sputtering using a GZO ceramic target at various conditions such as substrate temperature (RT, 400), residual water pressure ($P_{H_2O}$; 1.61${\times}10^{-4}∼2.2{\times}10^{-3}$ Pa), introduction of $H_2$ gas (8.5%) and different magnetic field strengths(250, 1000G). GZO films deposited without substrate heating showed clear degradation in film crystallinity and electrical properties with increasing $P_{H_2O}$. The resistivity increased from 3.0${\times}10^{-3}$ to 3.1${\times}10^{-2}{\Omega}㎝$ and the grain size of the films decreased from 24 to 3 nm when PH2O was increased from 1.61${\times}10^{-4}$ to 2.2${\times}10^{-3}$ Pa. However, degradation in electrical properties with increasing $P_{H_2O}$ was not observed for the films deposited with introduction of 8.5% $H_2$. When magnetic field strength of the cathode increased from 250G to 1000G, crystallinity and electrical properties of GZO films improved remarkably about all the $P_{H_2O}$. This result could be attributed to the decrease in film damage caused by the decrease in plasma impedance.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.1
• /
• pp.84-95
• /
• 2001

Titanium is widely used in dentistry for its low density, high strength, fatigue resistance, corrosion resistance, and biocompatibility. But it has a tendency of surface damage under circumstance of friction and impact for its low hardness of the surface. Coating is one of methods fir increasing surface hardness. Its effect is to improve surface physical characteristics without change of titanium. Diamond-like carbon and titanium nitride are known for its high hardness of the surface. So that this study was aimed at the wear test and the cytotoxicity test of the commercially pure titanium and Ti-6Al-4V alloy which were deposited by diamond-like carbon film or titanium nitride film to acertain improvement of the surface hardness and the biocompatibility. A disk (25mm diameter, 2mm thickness) was made of commercially pure titanium and Ti-6Al-4V alloy and these substrates were deposited by diamond-like carbon film or titanium nitride film. Diamond-like carbon film was deposited by the method of radiofrequency plasma assisted chemical vapor deposition and titanium nitride film was deposited by the method of reactive arc ion plating. Then these substrates were tested about wear characteristics by the pin-on-disk type wear tester in which ruby ball was used as a wear causer under the load of 32N, The fracture cycles were measured by rotating the substrates until their films were fractured. The wear volume was measured after 150 cycles and 3,000 cycles using surface profiler. The cytotoxicity test was peformed by the method of the MTT assay. The results were as follows : 1. In the results of the wear volume test, commercially pure titanium and titanium alloy which were coated by diamond-like carbon film or titanium nitride aim had higher resistance against wear than the substrates which were not coated by any films (P<0.05). 2. In the results of the fracture cycle test and the wear volume test, diamond-like carbon film had higher resistance against wear than titanium nitride film (P<0.05). 3. In both coatings of diamond-like carbon aim and titanium nitride film, Ti-6Al-4V alloy had higher resistance against wear than commercially pure titanium (P<0.05) 4. In the results of the cytotoxicity test, diamond-like carbon film and titanium nitride film had little cytotoxicity as like commercially pure titanium or Ti-6Al-4V alloy (P>0.05).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.1
• /
• pp.65-72
• /
• 2012

The aim of this study was to evaluate the effects of unripened cheese supplements on lipid metabolism and antioxidant status in hypercholesterolemic SD rats. Rats were induced to have hypercholesterolemia by feeding them high cholesterol diet (0.5% cholesterol and 0.2% sodium cholate) for 4 weeks and then divided into 2 groups. One group was fed a high cholesterol diet with 5% unripened cheese (URC) daily for 6 weeks, and the other one was fed a high cholesterol diet without 5% unripened cheese (URC) daily for 6 weeks. Significantly-increased plasma total cholesterol (TC), triglycerides (TG), and AST activity because of the high-cholesterol diet were reduced 18.8%, 40.5%, and 33%, respectively, by URC supplementation. Also, URC lowered hepatic total lipids, TCs, and TGs, whereas fecal lipid profiles were not changed by URC. The supplementation of URC resulted in an increase of plasma retinol and ${\alpha}$-tocopherol by 40.5% and 39.2% and leukoytic DNA resistance to oxidative stress by 52.3% compared to hypercholesterolemic control. These results suggest that unripened cheese supplements could exert significant health benefits to those with hypercholesterolemia through ameliorating lipid profiles and antioxidant effects.

• Microbiology and Biotechnology Letters
• /
• v.37 no.4
• /
• pp.377-382
• /
• 2009

Viral safety is an important prerequisite for clinical preparations of all biopharmaceuticals derived from plasma, cell lines, or tissues of human or animal origin. To ensure the safety, implementation of multiple viral clearance (inactivation and/or removal) steps has been highly recommended for manufacturing of biopharmaceuticals. Of the possible viral clearance strategies, Ultraviolet-C (UVC) irradiation has been known as an effective viral inactivating method. However it has been dismissed by biopharmaceutical industry as a result of the potential for protein damage and the difficulty in delivering uniform doses. Recently a continuous flow UVC reactor (UVivatec) was developed to provide highly efficient mixing and maximize virus exposure to the UV light. In order to investigate the effectiveness of UVivatec to inactivate viruses without causing significant protein damage, the feasibility of the UVC irradiation process was studied with a commercial therapeutic protein. Recovery yield in the optimized condition of $3,000\;J/m^2$ irradiation was more than 98%. The efficacy and robustness of the UVC reactor was evaluated with regard to the inactivation of human immunodeficiency virus (HIV), hepatitis A virus (HAV), bovine herpes virus (BHV), bovine viral diarrhea virus (BVDV), porcine parvovirus (PPV), bovine parvovirus (BPV), minute virus of mice (MVM), reovirus type 3 (REO), and bovine parainfluenza virus type 3 (BPIV). Non enveloped viruses (HAV, PPV, BPV, MVM, and REO) were completely inactivated to undetectable levels by $3,000\;J/m^2$ irradiation. Enveloped viruses such as HIV, BVDV, and BPIV were completely inactivated to undetectable levels. However BHV was incompletely inactivated with slight residual infectivity remaining even after $3,000\;J/m^2$ irradiation. The log reduction factors achieved by UVC irradiation were ${\geq}3.89$ for HIV, ${\geq}5.27$ for HAV, 5.29 for BHV, ${\geq}5.96$ for BVDV, ${\geq}4.37$ for PPV, ${\geq}3.55$ for BPV, ${\geq}3.51$ for MVM, ${\geq}4.20$ for REO, and ${\geq}4.15$ for BPIV. These results indicate that UVC irradiation using UVivatec was very effective and robust in inactivating all the viruses tested.