• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.1
• /
• pp.24-51
• /
• 2011

When supporting both voice and TCP in a wireless multihop network, there are two conflicting goals: to protect the VoIP traffic, and to completely utilize the remaining capacity for TCP. We investigate the interaction between these two popular categories of traffic and find that conventional solution approaches, such as enhanced TCP variants, priority queues, bandwidth limitation, and traffic shaping do not always achieve the goals. TCP and VoIP traffic do not easily coexist because of TCP aggressiveness and data burstiness, and the (self-) interference nature of multihop traffic. We found that enhanced TCP variants fail to coexist with VoIP in the wireless multihop scenarios. Surprisingly, even priority schemes, including those built into the MAC such as RTS/CTS or 802.11e generally cannot protect voice, as they do not account for the interference outside communication range. We present VAGP (Voice Adaptive Gateway Pacer) - an adaptive bandwidth control algorithm at the access gateway that dynamically paces wired-to-wireless TCP data flows based on VoIP traffic status. VAGP continuously monitors the quality of VoIP flows at the gateway and controls the bandwidth used by TCP flows before entering the wireless multihop. To also maintain utilization and TCP performance, VAGP employs TCP specific mechanisms that suppress certain retransmissions across the wireless multihop. Compared to previous proposals for improving TCP over wireless multihop, we show that VAGP retains the end-to-end semantics of TCP, does not require modifications of endpoints, and works in a variety of conditions: different TCP variants, multiple flows, and internet delays, different patterns of interference, different multihop topologies, and different traffic patterns.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.2
• /
• pp.106-113
• /
• 2009

Recently, due to many industrial accidents at construction sites, a variety of researches for structural health monitoring (SHM) of buildings are progressing. For real site application of SHM, one of the advanced technologies has blown as wireless sensor networks (WSN). In this paper, we proposed WIVA(WSN Monitoring framework based on 3D Visualization and Augmented Reality in Mobile Devices) system that applies 3D visualization and AR technology to mobile devices with camera based on WSN in order to expand the extent of information can observe. Moreover, we performed experiments to validate effectiveness in 3D and AR mode that utilize WSN data based on IEEE 802.15.4. In real implementation scenario, we demonstrated a fire occurrence test in 3-story building miniature.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.923-948
• /
• 2013

The main concern in mobile peer-to-peer (P2P) networks is security because jamming or eavesdropping on a wireless link is much easier than on a wired one and such damage can be incurred without physical access or contact. In particular, authentication has increasingly become a requirement in mobile P2P environments. This paper presents a new mutual authentication mechanism which requires less storage space and maintains a high level of security in mobile P2P networks. The proposed mechanism improves efficiency by avoiding the use of centralized entities and is designed to be agile in terms of both reliability and low-cost implementation. The mechanism suggested in the simulation evaluates the function costs occurring in authentication between the devices under mobile P2P network environment comparing to existing method in terms of basic operation costs, traffic costs, communications costs, storage costs and scalability. The simulation results show that the proposed mechanism provides high authentication with low cryptography processing overhead.

• Convergence Security Journal
• /
• v.8 no.2
• /
• pp.27-34
• /
• 2008

In this paper, we designed and implemented mobile object automatic system based on senor networks for telematics. For developing this system, we gather the various sensing data through wireless communication method using zigbee sensor networks and analyze them in monitoring equipment. And we enable the driver to recognize the car state information on the whole by interfacing analyzed data to telematics unit. And, we implemented automatic controller that can control temperature and humidity in car automatically by actuating air conditioner based on the data that was monitored throughout temperature sensor, humidity sensor and brightness sensor based on sensor networks.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.17-22
• /
• 2022

As the sixth generation (6G) promising technique, intelligent reflecting surface (IRS) has recently attracted much attention. The IRS based wireless communication is expected to deploy the upcoming 6G mobile networks, to increase energy and spectrum efficiency in the fifth generation (5G) wireless networks. In this paper, we compare the bit-error rate (BER) performances for phase-shift schemes of IRS non-orthogonal multiple access (NOMA). First, we derive a BER expression for the equalizing phase-shift scheme in IRS-NOMA networks. Then we compare the BER of the equalizing phase-shift scheme to that of the identical phase-shift scheme in IRS-NOMA networks, and show the BER improvement of the equalizing phase-shift scheme IRS NOMA over the identical phase-shift scheme IRS NOMA. Furthermore, we also validate the proposed analytical BER for the equalizing phase-shift scheme in IRS-NOMA by Monte Carlo simulations, and demonstrate that they well match each other.

• The KIPS Transactions:PartC
• /
• v.14C no.6
• /
• pp.493-502
• /
• 2007

In this paper, we propose a handoff-aware DiffServ scheduler which intends to guarantee various QoS requirements of multimedia services for mobile nodes in TDD/CDMA based wireless networks. TDD is widely used duplexing mechanism in wireless communications. Unlike FDD, TDD allows a node to symmetrically communicate with a base station by using a single frequency band, resulting in high utilization of wireless resources. DiffServ is regarded as a relatively simple QoS support mechanism and thus it is easy to be extended. This is because DiffServ is not a per-flow based mechanisms and it does not require any signaling protocol. However, previously proposed DiffServ schedulers for wired networks can not be deployed directly into wireless networks since they do not consider properties of wireless networks. As a solution to the problem, DSS(DiffServ Supporting Scheduler) was proposed. DSS uses uplink channel, which is originally used for a node to require a base station to transmit packets, to support QoS efficiently. However, QoS does not consider handoff so that it can not support QoS for moving nodes from one cell to the other cell. Therefor. the proposed handoff support QoS mechanism is necessary for TCC/CDMA networks. The proposed scheme allows a mobile node to achieve seamless service without QoS degradation even for the handoff duration.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.325-336
• /
• 2005

Mobile ad hoc networks (MANET) are composed of moving wireless hosts which, within range of each other, form wireless networks. For communication to occur between hosts that are not within each other's range, routes involving intermediate nodes must be established; however, since the hosts may be in motion, a host that was part of a route may move away from its upstream and downstream partners, thus breaking the route. In this paper, we propose anticipated route maintenance (ARM) protocol with two extensions to route discovery based routing scheme: Extend the route when nodes on a link move apart from each other and they have common neighbor that can be 'inserted' in the path, and shrink route when a node discovers that one of its neighbor which is not the next hop is also on the same route several hops later on. By utilizing only local geographic information (now a part of some route finding algorithms), a host can anticipate its neighbor's departure and, if other hosts are available, choose a host to bridge the gap, keeping the path connected. We present a distributed algorithm that anticipates route failure and performs preventative route maintenance using location information to increase a route lifespan. The benefits are that this reduces the need to find new routes (which is very expensive) and prevents interruptions in service. As the density of nodes increases, the chance to successfully utilize our route maintenance approach increases, and so does the savings. We have compared the performance of two protocols, pure dynamic source routing (DSR) protocol and DSR with ARM. The simulation results show how ARM improves the functionality of DSR by preventing the links in the route from breaking. Packets delivery ratio could be increased using ARM and achieved approximately $\100%$ improvement. The simulations clarify also how ARM shows a noticeable improvement in dropped packets and links stability over DSR, even though there is more traffic and channel overhead in ARM.

• KIISE Transactions on Computing Practices
• /
• v.24 no.2
• /
• pp.77-81
• /
• 2018

Many studies that improve the efficiency of data collection and a network's lifetime by using a mobile sink have been conducted using wireless sensor networks. If a drone is used as a mobile sink, the drone can collect data more efficiently than can existing mobile sinks operating on the ground because the drone can minimize the effects of obstacles and the terrain. In this paper, we propose a rendezvous node selection scheme which considers estimated drone's trajectory and data collection latency of sensor networks for reliable data collection, when a drone whose trajectory is not predetermined works with terrestrial wireless sensor networks. A selected rendezvous node on the ground collects data from the entire network and it sends then collected data to the drone via direct communication. We also verify that the proposed scheme is more reliable than previous schemes without considering the drone's trajectory and data collection latency.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.6
• /
• pp.17-24
• /
• 2011

In this paper, we propose an Entropy-based Routing Protocol using Mobility (ERPM) for supporting ubiquitous convergence services efficiently in mobile ad-hoc wireless networks. The main features that the ERPM introduces to obtain the goals can be summarized as follows. First, ERPM can construct stable routing routes based on the entropy concepts using mobility of nodes. Second, ERPM can quantitatively evaluate the stability of route by entropy concepts using mobility of nodes. Third, ERPM can select the most stable route in the view points of mobility of routes between a source node and a destination node, where multiple paths are available. The performance evaluation of the proposed ERPM performed via simulation using OPNET and analysis shows that the ERPM can support the construction of stable routing routes and increase the transmission ratio of data efficiently.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.6
• /
• pp.25-34
• /
• 2011

In this paper, In this paper, we propose a Cooperative Routing Protocol (CooRP) for supporting network convergence and transmission services efficiently in mobile ad-hoc wireless sensor networks with Rayleigh fading environments. The main contributions and features of this paper are as follows. First, the routing routes are decided on route stability based on entropy concepts using mobility of nodes within the direction guided line region to increase the operational lifetime of routes as well as reduce control overhead for route construction. Second, a cooperative data transmission strategy based on the constructed stable routing route is used to increase packet delivery ratio with advanced SNR. Third, a theoretical analysis for cooperative data transmission of the proposed CooRP with outage probability is presented. The performance evaluation of the proposed CooRP is performed via simulation using OPNET and analysis. The results of performance evaluation show that the proposed CooRP by using stable routing routes and cooperative transmission can increase packet delivery ratio efficiently.