• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.621-629
• /
• 2001

In this thesis a wireless data transmission system has been proposed and analysed that uses the multi-carrier technique with the adaptive modulation scheme. In general, the OFDM(Orthogonal Frequency Division Multiplexing) system is assigning a same amount of information to all sub-carriers in a wireless data transmission. In the proposed system, the different amount of information is assigned to each sub-carrier depending on the state of channel and the target probability of error of system. With the proposed scheme, the transmission rate can be maximized with the fixed power and the required power to transmit the information can be minimized with the target probability of error of system.

• Journal of Advanced Navigation Technology
• /
• v.8 no.1
• /
• pp.65-72
• /
• 2004

A basic access method using for IEEE 802.11a wireless LANs is the DCF method that is based on the CSMA/CA. But, Since IEEE 802.11 MAC layer uses original backoff algorithm (Exponential backoff method), when collision occurs, the size of contention windows increases the double size. Hence, packet transmission delay time increases and efficiency is decreased by original backoff scheme. In this paper, we have analyzed TCP packet transmission time of IEEE 802.11 MAC DCF protocol for wireless LANs using a proposed enhanced backoff algorithm. From the results, in OFDM/quadrature phase shift keying channel (QPSK), we can achieve that the transmission time in wireless channel decreases as the TCP packet size increases and based on the data collected, we can infer the correlation between TCP packet size and total message transmission time, allowing for an inference of the optimal packet size in the TCP layer.

• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.188-195
• /
• 2004

We have analyzed the performance of TCP in the CDMA mobile communications systems with the adaptive modulation and coding(AMC). The wireless channel using AMC is characterized with not high error rate but highly varying bandwidth. Due to time-varying bandwidth, timeout events of TCP occurs more frequently, which leads to the throughput degradation. The analysis model is composed of the two parts. In the first part, we divide TCP packet stream into ‘packet groups’and derive the probability distribution of the wireless transmission time of each Packet group that reflects the time varying characteristics of AMC. In the second part, we formulate embedded Markov chain by making use of the results of the first part to model TCP timer mechanism and wireless transmission. Since our system model is characterized by the forward link high speed data transmission using AMC, the results reported in this paper can be used as a guideline for the design and operation of HSDPA, 1xEV-DO, and 1xEV-DV.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.6
• /
• pp.1055-1059
• /
• 2006

In Wireless Sensor Networks(WSNs), a sensor node broadcasts the acquisited sensing data to neighboring other nodes and it makes serious data duplication problem that increases network traffic loads and data loss. This problem is concerned with the conflict condition for supporting both the reliability of data transfer and avoidance of network congestion. To solve the problem, a reliable congestion control protocol is necessary that considers critical factors affecting on data transfer reliability such as reliable data transmission, wireless loss, and congestion loss for supporting effective congestion control in WSNs. In his paper, we proposes a reliable congestion protocol, called HRCCP, based on hop-hop sequence number, and DSbACK by minimizing useless data transfers as an energy-saved congestion control method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.442-445
• /
• 2006

In Wireless Sensor Networks(WSNs), a sensor node broadcasts an acquisited data to neighboring other nodes and it makes serious data duplication problem that increases network traffic loads and data loss. This problem is concerned with the conflict condition for supporting both the reliability of data transfer and avoidance of network congestion. To solve the problem, a reliable congestion control protocol is necessary that considers critical factors affecting on data transfer reliability such as reliable data transmission, wireless loss, and congestion loss for supporting effective congestion control in WSNs. In this paper, we proposes a reliable congestion protocol, ratted HRCCP, based on hop-hop sequence number, and DSbACK by minimizing useless data transfers as an energy-saved congestion control method.

• The KIPS Transactions:PartC
• /
• v.17C no.5
• /
• pp.433-440
• /
• 2010

Energy efficiency, low latency and scalability for wireless sensor networks are important requirements, especially, the wireless sensor network consist of a large number of sensor nodes should be minimized energy consumption of each node to extend network lifetime with limited battery power. An efficient algorithm and energy management technology for minimizing the energy consumption at each sensor node is also required to improve transfer rate. Thus, this paper propose no-overlap multi-pass protocol provides for sensor data transmission in the wireless sensor network environment. The proposed scheme should minimize network overhead through reduced a sensor data translation use to searched multi-path and added the multi-path in routing table. Proposed routing protocol may minimize the energy consumption at each node, thus prolong the lifetime of the sensor network regardless of where the sink node is located outside or inside the received signal strength range. To verify propriety proposed scheme constructs sensor networks adapt to current model using the real data and evaluate consumption of total energy.

• The Journal of the Korea Contents Association
• /
• v.6 no.6
• /
• pp.16-25
• /
• 2006

Most water tanks operating have been managed by people's five senses. A human material resource have been wasted awfully at this. In the present study, we suggest the wireless integrated system for managing water tank of reducing the wastage human resources and on-line real time managing efforts of water tanks. Water level sensor works the pump sending the data from water tank control to the wireless control on sensing water level. At this time, every kind data which happens in the water tank transmits the line transmission modem. Data to be received from the line transmission modem is stored at the database after we record the logs by each hour. We display the result to the web pages, after checking the pump motion, the pump error, the water level, the solar battery error, the chemicals, and the telephone line to the foundation data to be saved. Furthermore, this paper suggests empirical applications of the proposed wireless integrated system for managing water tank in order to verify its feasibility.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.386-396
• /
• 2013

A 10-Gbit/s wireless communication system operating at a carrier frequency of 300 GHz is presented. The modulation scheme is amplitude shift keying in incoherent mode with a high intermediate frequency (IF) of 30 GHz and a bandwidth of 20 GHz for transmitting a 10-Gbit/s baseband (BB) data signal. A single sideband transmission is implemented using a waveguide-tapered 270-GHz high-pass filter with a lower sideband rejection of around 60 dB. This paper presents an all-electronic design of a terahertz communication system, including the major modules of the BB and IF band as well as the RF modules. The wireless link shows that, aided by a clock and data recovery circuit, it can receive $2^7$-1 pseudorandom binary sequence data without error at up to 10 Gbit/s for over 1.2 m using collimating lenses, where the transmitted power is 10 ${\mu}W$.

• The KIPS Transactions:PartC
• /
• v.11C no.3
• /
• pp.379-386
• /
• 2004

The WAP 2.0 system is a newly proposed wireless communication system by the WAP Forum for interoperability across Internet environment and the system takes charge of communication between WAP terminals and existing origin Web servers. The purpose of this paper is 1) to construct a WAP 2.0 proxy proposed by the WAP Forum and 2) to improve the WAP Proxy in order to increase communication efficiency between wired and wireless communication objects. The Improved WAP proxy constructed in this study provides links between wired and wireless communication environments using the split-TCP concept. However, unlike the split-TCP connection, The improved WAP proxy maintains TCP's end-to-end semantics and reduces overhead by avoiding operations as much as possible on the upper protocol layer. In addition, The improved WAP proxy supports SACK(Selective Acknowledgement ) option and Timestamp option for speedy re-transmission which leads to reduction of performance degradation. After constructing the improved WAP proxy under Linux environment, experiments have been taken. The experimental results show that, compared with the experiments when a WAP proxy proposed by the WAP Forum is used, both data transmission delay time and data transmission size decrease to show that communication efficiency is increased. In particular, as packet missing ratio Increases, data transmission size decreases, which demonstrates that the improved WAP proxy is very effective for performance improvement in wireless communication environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.2
• /
• pp.37-43
• /
• 2009

Reliability should be assured to support the stable ubiquitous sensor network services in wireless sensor networks. Data transmission reliability is the most important one in the reliability factors in USN. When we consider the wireless communication environment of sensor networks, data transmission reliability requires the performance improvement. For this, this paper introduces the method that can handle the reliability and the performance together. The proposed scheme uses the self relay signal between sensor nodes to deliver the ACK and the next data is scheduled to be sent on acceptance of this self relay signal. For the evaluation of the performance improvement, the analysis and the simulation have been done.