• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.14-19
• /
• 2015

Recently, water sewage disposal facilities are able to manage real-time data collection and record management through compact broadband modem LAN switching technology. Therefore, it needs more stable and efficient facility management. So, we required practical use of environmental facilities convergence based on broadband integrated modem. In this paper, we proposed short distance wireless communication network of compact broadband modem for sewage disposal facilities. And it received data inside of water treatment facility using the two communication methods (IEEE802.11x and IEEE802.15.4x). Then, our proposed an data-flow control algorithm of wireless network technology will prioritize processing data when emergency happen through collecting data, analysis data and processing. Lastly, we proved usefulness by experiment and simulation analysis.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.2
• /
• pp.204-210
• /
• 2021

In this paper, we studied a method of wirelessly checking up the POD for captive flight tests which is performed during the development of guided weapons systems. The wireless power transfer module, the power distribution device, and the battery pack were designed to wirelessly power the captive flight test POD, and the communication device was designed to enable wireless communication between the POD and the check-up device. The communication device was designed to enable WiFi, IR communication, and laser diode communication, so that various communication methods could be tested. Through the performance test, it was confirmed that power was stably supplied to the captive flight test POD, and the wireless communication performance was verified by measuring the delay time and error rate. As a result, by using our system the POD check-up for the captive flight test was performed wirelessly and the data of the captive equipment could be obtained effectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.6
• /
• pp.2546-2566
• /
• 2016

This paper investigates an efficient transmission scheme for the remote wireless sensors to receive information which is rarely discussed in the integrated remote wireless sensor and multibeam satellite networks (IWSMSNs). The networks can be employed to exchange sensing information for emergency scenario, ocean scenario, and so on, which are isolated from available terrestrial networks. As the efficient transmission link is important to the IWSMSNs, we propose a hybrid full frequency (HFF) precoding by taking advantage of frequency reuse and multiple-input multiple-output (MIMO) precoding. Considering energy efficiency and sinks fairness are crucial to transmission link, thus the HFF precoding problems are formulated as transmit power minimization (TPM) and max-min fair (MMF) received signal to interference plus noise ratio (SINR) problems, which can be transformed to indefinite quadratic optimization programs. Then this paper presents a semi-definite programming (SDP) algorithm to solve the problems for the IWSMSNs. The promising potential of HFF for the real IWSMSNs is demonstrated through simulations.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.384-384
• /
• 2004

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4044-4062
• /
• 2016

We investigate the optimization of energy consumption in Mobile Cloud environment in this paper. In order to optimize the energy consumed by the CPUs in mobile devices, we put forward using the asymptotic time complexity (ATC) method to distinguish the computational complexities of the applications when they are executed in mobile devices. We propose a multi-scale scheme to quantize the channel gain and provide an improved dynamic transmission scheduling algorithm when offloading the applications to the cloud center, which has been proved to be helpful for reducing the mobile devices energy consumption. We give the energy estimation methods in both mobile execution model and cloud execution model. The numerical results suggest that energy consumed by the mobile devices can be remarkably saved with our proposed multi-scale scheme. Moreover, the results can be used as a guideline for the mobile devices to choose whether executing the application locally or offloading it to the cloud center.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.273-276
• /
• 2003

본 논문에서는 한쪽이 단락된 스트립선로(Stripline)와 Loading 캐패시턴스(Capacitance)로 구성된 새로운 형태의 1/4파장 스트립선로 공진기를 제안하였으며, 이 공진기를 이용해서 5.2 GHz 대역 무선 LAN용 적층 대역통과 여파기를 설계, 제작 하였다. 제안한 공진기의 전파지연효과(Slow-wave Effect) 때문에, 기존의 공진기에 비해서 길이가 축소되며, 기준 공진주파수(Fundamental Resonant Frequency)에 대한, 첫 번째 기생공진주파수(First Spurious Resonant Frequency) 값이 커지기 때문에, 넓은 상향저지대역(Wide Upper Stopband)을 갖는 초소형의 대역통과 여파기의 설계가 가능하다. 설계한 여파기를 LTCC 적층 공정 기술을 이용하여 제작하였으며 그 크기는 $3.2mm{\times}1.6mm{\times}0.8mm$ 이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1869-1876
• /
• 2014

Car rear-view camera system supplies various services for life protection, ease of parking, and safe driving by showing the rear of the vehicle through monitor when reversing the car. In this paper we researched development methods and design of a Car Rear-view Camera System based on the Binary CDMA technology - new technology of wireless personal area network developed by Korea - that makes free installation without wired cables restriction and reduces installation costs and technology royalties.

• Electronics and Telecommunications Trends
• /
• v.34 no.6
• /
• pp.61-70
• /
• 2019

Recently, research and development for next-generation mobile communication and short-range wireless communication has begun worldwide along with the provision of commercial services of 5G mobile communication technology. In response to this trend, the THz band has attracted considerable attention as a frequency band for transmitting 100 Gbps of large-capacity wireless data. For communication in the THz band, research and development of approaches based on photonics and electronics is being actively performed; the configurations, characteristics, and performances of these two methods for THz transmission have been seriously examined. Among them, we reviewed the technical issues in implementing THz wireless transmission technology using photonics technology. We also introduced the Electronic and Telecommunications Research Institute's (ETRI) development of photonics-based THz short-range transmission technology starting from 2019 and including some initial results. In the near future, 100 Gbps high-capacity wireless data transmission technology utilizing photonics technology is expected to be commercially available and applied to various applications, such as 3D hologram transmission, uncompressed large capacity medical data transmission, and multiple augmented reality/virtual reality (AR/VR).

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.1
• /
• pp.25-37
• /
• 2019

Power-line communication (PLC) has influenced smart grid development. In addition, PLC has also been instrumental in current research on internet-of-things (IoT). Due to the implementation of PLC in smart grid and IoT environments, strides have been made in PLC and its combination with the wireless system to form a hybrid communication system. Also, PLC has evolved from a single-input-single-output (SISO) configuration to multiple-input-multiple-output (MIMO) configuration system, and from a point-to-point communication system to cooperative communication systems. In this work, we extend a MIMO wireless two-way amplify-and-forward (AF) cooperative communication system to a hybrid PLC and wireless (PLC/W) system configuration. We then maximize the weighted sum-rate for the hybrid PLC/W by optimizing the precoders at each node within the hybrid PLC/W system. The sum-rate problem was found to be non-convex, therefore, an iterative algorithm is used to find the optimal precoders that locally maximize the system sum-rate. For our simulation results, we compare our proposed hybrid PLC/W configuration to a PLC only and wireless only configuration at each node. Due to an improvement in system diversity, the hybrid PLC/W configuration outperformed the PLC only and wireless only system configurations in all simulation results presented in this paper.

• Journal of Advanced Navigation Technology
• /
• v.26 no.1
• /
• pp.1-8
• /
• 2022

Telemetry system is a system that measures and transmits status information in the aircraft to the ground. The data received from the ground is information for monitoring the state of the aircraft, and can be checked and analyzed in real time through the test program. Data processing test system for telemetry currently in operation is built to transmit data using wired communication and perform test. As smart devices become popular due to the continuous development of information and communication technology, wireless communication networks are becoming important, and technologies for improving performance are steadily being developed. In this paper, we suggests and builds data processing ground test system for telemetry using wireless communication(Wi-Fi) that can be checked through smart devices such as tablets, in order to break away from the existing method and apply future-oriented technology. Finally, the suggested test system performance was proved by testing in various environments by linking test equipment and test program.