• ETRI Journal
• /
• v.31 no.5
• /
• pp.525-533
• /
• 2009

This paper proposes a distributed borrowing addressing (DIBA) scheme to solve problems of failure in address assignments resulting from limited tree depth and width when the distributed address assignment mechanism is used in a ZigBee/IEEE 802.15.4 wireless sensor network. DIBA is a method of borrowing addresses from neighbor nodes for newly entering nodes and assigning the borrowed addresses. Its network or sensing coverage can increase with almost the same overhead as the existing method. DIBA is a simple and lightweight means of addressing and routing, making it suitable for wireless sensor networks. Simulations showed that DIBA is a distributed addressing scheme with consistently excellent performance.

• Journal of information and communication convergence engineering
• /
• v.4 no.2
• /
• pp.62-66
• /
• 2006

The objective of this thesis is to measure the limit of the real space where wireless Local Area Network (LAN) is used, and to apply this result as reference to set up a real Wireless LAN environment. The organized circumference was composed of Wireless LAN based on IEEE 802.11b of the American standard, and the examination is carried out on the campus. On the real condition of office environment and open space, the ratio of available distance to a signal at each distance was measured and this result was studied as data to embody wireless LAN on the campus. The measurement under an indoor environment was executed under circumstance having two walls and open space, however, was executed respectively under three circumstances: Where no obstacle, where one wall exists, and where two or more walls exist.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.2
• /
• pp.97-104
• /
• 2005

Usually, propagation attenuation of millimeter wave occurs by rainfall, snowfall, temperature, effect of pressure of air. In 60GHz wave band wireless communication network, temperature change becomes big factor of propagation loss department. Also, temperature change causes disturbance of 60GHz frequency at transceiver. In this study, we used 60GHz transceiver and found propagation loss of wireless path and operating frequency disturbance characteristics. In transceiver that there is no temperature compensated device, operating frequency of TX changed by 60.865GHz at temperature of $-5^{\circ}C$, and appeared by 60.730GHz when is $50^{\circ}C$. Therefore, operating frequency change width by temperature change are about 100MHz, greatly. But, in transceiver that there is temperature compensated device, operating frequency of TX changed by 60.830GHz at temperature of $-5^{\circ}C$, and appeared by 60.710GHz when is $50^{\circ}C$. Therefore, operating frequency change width by temperature change are about 20MHz. According to these result, we constructed between buildings examination wireless site for point to point wireless communication using 60GHz band transceivers who have do temperature compensated device, and investigated data transmission characteristics about ambient temperature change. Therefore, if use transceiver that have temperature compensated device, may overcome the wireless transmission error in 60GHz band wireless communication LAN networks despite of ambient temperature change.

• Journal of information and communication convergence engineering
• /
• v.3 no.1
• /
• pp.9-12
• /
• 2005

In this research, we developed a ubiquitous computing platform that can analyze the vibration and noise in wireless environment by wireless LAN and sensors. In order to utilize the COTS(Commercial Off The Shelf) concept, we used a PDA that supports wireless LAN and serial communication as a main board. Following platform is used to measure the noise level of heavy construction equipments in a remote area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1933-1941
• /
• 2016

This paper compares the performance of wireless communication technologies to replace the wired networks by wireless networks on avionics intra-communication. Due to the drawbacks of wired network, such as complexity, weight, maintenance cost and scalability, it leads to the high data rate and network traffic demands of avionics systems. Therefore, in WAIC(Wireless Avionics Intra-Communications) system suggested by ITU(International Telecommunication Union), based on environment of avionics system and requirements of a wired network, wireless network structures are defined to solve the problems of wired networks. In this paper, we consider features, advantages and disadvantages of wireless communication technologies which can be used for wireless avionics network, and we propose suitable wireless communication technology candidates for wireless avionics networks in WAIC environments.

• Journal of information and communication convergence engineering
• /
• v.16 no.2
• /
• pp.130-134
• /
• 2018

Wireless capsule endoscopy (WCE) is considered as recent technology for the detection cancer cells in the human digestive system. WCE sends the captured information from inside the body to a sensor on the skin surface through a wireless medium. In WCE, the design of low-power consumption devices is a challenging topic. In the Shannon-Nyquist sampling theorem, the number of samples should be at least twice the highest transmission frequency to reconstruct precise signals. The number of samples is proportional to the power consumption in wireless communication. This paper proposes compressive sensing as a method to reduce power consumption in WCE, by means of a trade-off between samples and reconstruction accuracy. The proposed scheme is validated under channel constraints, expressed as the realistic human body path loss. The results show that the proposed scheme achieves a significant reduction in WCE power consumption and achieves a faster computation time with low signal error reconstruction.

• Journal of information and communication convergence engineering
• /
• v.18 no.2
• /
• pp.88-93
• /
• 2020

The IEEE 802.11p-based wireless access in vehicular environments (WAVE) [1] communication is a method used exclusively for wireless communication on the road. This technique enables information sharing not only among moving vehicles but also between vehicles and infrastructure [2]. As part of WAVE communication, data is transmitted to and from vehicles in motion; in this case, it is difficult to determine the channel accurately in an outdoor environment owing to the Doppler shift [3]. This paper proposes a new channel estimation scheme for enhancing the reception performance of the IEEE 802.11p-based WAVE system. The proposed technique obtains the initial channel value by estimating the least square in the time domain by inserting a pilot signal for channel estimation into the IEEE 802.11p virtual subcarrier. Subsequently, a least mean square algorithm is applied to the initial channel value to update the estimated channel value. The simulation results obtained using the proposed channel estimation technique confirm its remarkable efficiency.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.5
• /
• pp.325-330
• /
• 2014

The era of convergence is being applied to all areas of Information and Communication Technology (ICT). The convergence of broadcasting service and communication service almost occurs on smart devices including smartphone. The smart hybrid Digital Multimedia Broadcasting (DMB) is a typical example of the convergence of broadcasting and wireless communication service. The hybrid mobile broadcasting service can support seamless video, 3D, high quality, and additional data services based on network connection between the broadcasting and wireless network. The gateway and terminal (including apps on the smartphone) take the role of the main components on the hybrid service. This paper presents the service concept, main components structure, the implementation of gateway and terminals, and field test to the urban areas for the mobile hybrid system.

• Convergence Security Journal
• /
• v.7 no.4
• /
• pp.115-121
• /
• 2007

Due on failures of communication nodes for the wireless and wired networks, mobile agents may be blocked even if there is available service in the networks. To solve it, we propose migration policy with reordering of the paths to guarantee the migration of mobile agents and the paper will provide the extension with the autonomous migration of mobile agents.

• Journal of the Korea Convergence Society
• /
• v.13 no.4
• /
• pp.53-61
• /
• 2022

Accidents are steadily occurring due to machine defects and carelessness during LNG storage operations. In previous studies, an environmental sensor module capable of measuring pressure, temperature, gas concentration, and flow to detect danger in advance was developed and the response speed according to the amount of leaked gas was measured. This paper proposes the development of a wired and wireless communication module that transmits data measured by the environmental sensor module to embedded devices connected to wired and wireless networks of SPI, UART, and LTE. First, a data communication module capable of interworking with an environmental sensor is designed. Design a protocol between devices in the Local Control Part and wired and wireless protocols in the Local Control Part and Remote Control Part. Ethernet, WiFi, and LTE communication modules were designed, and UART and SPI channels that can be linked with embedded controllers were designed. As a result, it was confirmed through a UI (User Interface) that each embedded device transmits data measured by the environmental sensor module while simultaneously communicating on a wired and wireless basis.