• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1145-1150
• /
• 2008

In this paper, We studied efficient design of wireless transmission system for unified data transmission in a subway and railway. It is increased that need of broadband multimedia service to make useful environment for user and to support the operation of railway system. High bandwidth is better if we need more services. But, high bandwidth requires more cost at tunnel of subway. More bandwidth make receive sensitivity to bad. So it need more wireless Station. We deduced best bandwidth of subway wireless transmission system reflecting the cost of installation and efficiency of system. Consequently, we decide efficient service model of broadband wireless system at a subway. Subway broadband wireless transmission system is tested in this year, and it is to be extended to province subway. Cost of subway broadband wireless transmission system is saved, because the system can be efficiently designed. Therefore, the effectiveness is expected to be very big.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1255-1261
• /
• 2010

An operating information and fault recode of train is very important information for safety driving and maintenance. And these information is increased and need high speed as the number of trains is increased. Wireless LAN or CDMA network is efficient to report more complicated and various information from vehicle to server in control center. Existing wireless transmission system has weakness due to transmission system is separated with TDCS and standalone. At first, standalone system needs space to be installed and cost is increased. And data transmission capacity and speed is limited by complicated structure that transmission system receive data thru serial communication like RS232 and then data transmission system send data to server in control center. This article is study to develop embedded & wireless fault code transmission device to be installed in TDCS to overcome weakness of space and to have more cost effective and simple structure. It is adapted 802.11b/g WiFi for wireless communication and OS is used embedded Linux that can easily implement wireless communication environment and ensure TCP/IP communication’s security. We also implement simple server to test wireless communication between embedded & wireless fault code transmission device and server in control center.

• 반도체디스플레이기술학회지
• /
• 제13권4호
• /
• pp.59-63
• /
• 2014

Previous studies have selected wireless power transmission system using 2.45 GHz of ISM band, but the researches for 5.8 GHz microwave wireless power transmission have been relatively rare. The 5.8 GHz has some advantages compared with 2.45 GHz. Those are smaller antenna and smaller integrated system for RFIC. In this paper, the 5.8 GHz wireless power transmission system was developed and transmission efficiency was measured according to the distance. A transmitter sent the amplified microwaves through an antenna amplified by a power amplifier of 1W for 5.8 GHz, and a receiver was converted to DC from RF through a RF-DC Converter. In the 1W 5.8GHz wireless power transmission system, the converted currents and voltages were measured to evaluate transmission efficiency at each distance where LED lights up to 1m. The RF-DC Converter is designed and fabricated by impedance matching using full-wave rectifier circuit. The transmission-efficiency of the system shows from 1.05% at 0cm to 0.095% at 100cm by distance.

• 한국전자통신학회논문지
• /
• 제17권6호
• /
• pp.1025-1032
• /
• 2022

본 논문에서는 기존 유선기반 CCTV 감시시스템과 IP 카메라 시스템에서 발생되는 구축비용에 대한 부담을 절감하고자 무선 통신기술을 활용한 TDMA기반 PoE 무선 다중 IP 카메라 전송시스템 개발이며, 국산 무선통신기술을 활용한 고화질 영상의 원거리 무선 전송 기술에 대해 설계 및 구현 하고자 한다. 제안 관련 기술에 대한 선 IP 전송 시스템의 송수신 프로토타입과 무선 다중 IP 카메라 전송 단말장치 및 영상 수집 장치(SB-200)에 대해 기술하였다.

• 조명전기설비학회논문지
• /
• 제29권4호
• /
• pp.47-53
• /
• 2015

The electrical safety and efficiency is the most important thing of the electric vehicle charging system. The prior system is contact charging system that is contacted directly by human. So, it has riskiness such as electric shock in the case of poor insulation or contact problems. To solve these safety issues and the convenience problems, a wireless power transmission system has been developed and is currently in trial operation. However, because high frequency is used in wireless power transmission system instead of commercial frequency, we need to apply protection measures concerning electric shock and equipment protection. Also, it should be accompanied by measuring efficiency for the effective operation of the wireless power transmission system. Therefore, we structured monitoring system in trial operation area of wireless power transmission system and applied decision algorithm for protection of human and equipment and economic operation of it.

• 한국전자통신학회논문지
• /
• 제18권1호
• /
• pp.1-10
• /
• 2023

본 논문에서는 기존 유선기반 CCTV 감시시스템과 IP 카메라 시스템에 국산 무선통신기술을 활용한 고화질 영상의 원거리 무선 전송 기술에 대해 설계 및 구현에 대해 성능 평가을 하였다. 무선 다중 IP 카메라 전송 단말장치및 무선통신 RF 모듈간 연동시험과 무선 다중 IP 카메라 기반 영상전송시스템 통합 연동시험으로 영상 전송 시 모듈 연동 적합성을 확인한다.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.102-107
• /
• 2021

In this paper, the measurements of received power was shown and compared in two developed 5.8GHz 25W wireless charging systems. One is the system using commercial transmission antenna, and the other is the system using transmission antenna combined with metamaterial. The system combined with metamaterial shows higher received power due to negative reflective index of metamaterial. In addition, a comparative analysis of the systems shows that the transmission efficiency in the systems can decrease the real gain of transmission antenna due to higher side robe of beam pattern. The side robe beams of transmitting antenna interferes transmitted beam with the reflected beams from the bottom region due to the side robes. The failure problems of the RF wireless charging systems are discussed and proposed in order to charge mobile devices through the RF wireless charging system.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권1호
• /
• pp.36-39
• /
• 2015

Many studies are being conducted to implement wireless charging, for example, for cellular phones or electronic tooth brushes, via wireless power transmission technique. However, the magnetic induction method had a very short transmission distance. To solve this problem, the team of Professor Marin Soljacic proposed a magnetic resonance system that used two resonance coils with the same resonance frequency. It had an approximately 40% efficiency at a 2m distance. The system improved the low efficiency and short distance problems of the existing systems. So it could also widen the application range of wireless power transmission. Many studies on the subject are underway. In this paper, the superconductor coil was used to improve the efficiency of magnetic resonance wireless power transmission. The resonance wireless power transmission system had a source coil, a load coil, and resonance coils (a transmitter and a receiver). The efficiency and distance depended on the characteristics of the transmitter and receiver coils that had the same resonance frequency. Therefore, two resonance coils were fabricated by superconductors. The current density of the superconductor was higher than that of the normal conductor coil. Accordingly, it had a high quality-factor and improved efficiency.

• International Journal of Contents
• /
• 제12권1호
• /
• pp.65-69
• /
• 2016

Wireless communication chipsets have fixed transmission rate and communication distance. Although there are many kinds of chipsets with throughput and distance purpose, they cannot support various types of wireless applications. This paper provides theoretic research results in order to support various wireless applications requiring different throughput, delayed quality-of-service (QoS), and different communication distances by using a wireless communication chipset with fixed rate and transmission power. As a performance metric, the probability for a data frame that successfully receives at a desired receiver is adopted. Based on this probability, the average number of transmission in order to make a successful frame transmission is derived. Equations are utilized to analyze the performance of a single-hop with channel coding and a dual-hop without error correction matter transmission system. Our results revealed that single-hop transmission assisted by channel coding could extend its communication distance. However, communication range extending effect of the single-hop system was limited. Accordingly, dual-hop transmission is needed to overcome the communication distance limit of a chipset.

• 한국인터넷방송통신학회논문지
• /
• 제10권5호
• /
• pp.89-96
• /
• 2010

본 논문은 방송현장에서 TV중계차와 EFP카메라 또는 ENG카메라간의 카메라 케이블 연결이 방송프로그램 제작시 여러가지 장애물과 거리에 한계가 있어 자유로운 카메라 촬영활동에 불편을 주고 있는바, DVB-T방송에서 사용하는 무선영상 전송장치와 수신장비를 제작하여 본 연구에 응용하는 사례로, 야외는 물론 실내에서도 카메라 촬영활동이 자유스러운 "Wireless 카메라 영상전송 시스템"의 개발을 목표로 하였다. 본 연구는 연구접근이 용이한 아날로그 콤포지트 영상신호 출력을 갖는 카메라와 이 영상신호를 압축하는 MPEG-2시스템, COFDM 전송방식을 이용하는 영상전송시스템으로 제작실험하게 되었으며, 그 결과 영상 및 전송장치에 대하여 양호한 QoS값을 얻게 되었으며, 본 실험을 통해 TV방송제작 현장의 활용은 물론, 무선 CCTV 장치산업의 적용 할 수 있는 가능성을 갖게 되었다.