• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.122-127
• /
• 2016

In this paper, new spectrum sensing schemes based on analog/RF front-end processing are introduced for IoT wireless sensor networks. While the conventional approaches for wireless channel cognition have been issued in signal processing area, the RF spectrum cognition concept makes it feasible to achieve cognitive wireless sensor networks (C-WSNs). The spectrum cognition at RF processing is categorized as four kinds of sensing mechanisms. Two recent reseaches are described as promising candidates for the C-WSN. One senses spectrum by the frequency discriminating receiver, the other senses and detects from the frequency selective super-regenerative receiver. The introduced systems with simple and low-power RF architectures play dual roles of channel sensing and demodulation. simultaneously. Therefore, introduced spectrum sensing receivers can be one of the best candidates for IoT wireless sensor devices in C-WSN environments.

• Journal of Sensor Science and Technology
• /
• v.20 no.2
• /
• pp.137-144
• /
• 2011

Wireless sensor network(WSN) has the potential to greatly effect many aspects of u-healthcare. By outfitting the potential with WSN, wearable sensor node can collects real-time data on physiological status and transmits through base station to server PC. However, there is a significant gap between WSN and healthcare. WSN has the limited resource about computing capability and data transmission according to bio-sensor sampling rates and channels to apply healthcare system. If a wearable node transmits ECG and accelerometer data of 4 channel sampled at 100 Hz, these data may occur high loss packets for transmitting human activity and ECG to server PC. Therefore current wearable sensor nodes have to solve above mentioned problems to be suited for u-healthcare system. Most WSN based activity and ECG monitoring system have been implemented some algorithms which are applied for signal vector magnitude(SVM) algorithm and ECG noise algorithm in server PC. In this paper, A wearable sensor node using integrated ECG and 3-axial accelerometer based on wireless sensor network is designed and developed. It can form multi-hop network with relay nodes to extend network range in WSN. Our wearable nodes can transmit 1-channel activity data processed activity classification data vector using SVM algorithm to 3-channel accelerometer data. ECG signals are contaminated with high frequency noise such as power line interference and muscle artifact. Our wearable sensor nodes can remove high frequency noise to clear original ECG signal for healthcare monitoring.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1324-1331
• /
• 2008

Recently, landslides have frequently occurred on natural slopes during periods of intense rainfall. With a rapidly increasing population on or near steep terrain in Korea, landslides have become one of the most significant natural hazards. Thus, it is necessary to protect people from landslides and to minimize the damage of houses, roads and other facilities. To accomplish this goal, many landslide prediction methods have been developed in the world. In this study, a simple landslide prediction system that enables people to escape the endangered area is introduced. The system is focused to debris flows which happen frequently during periods of intense rainfall. The system is based on the wireless sensor network (WSN) that is composed of sensor nodes, gateway, and server system. Sensor nodes and gateway are deployed with Microstrain G-Link system. Five wireless sensor nodes and gateway are installed at the man-made slope to detect landslide. It is found that the acceleration data of each sensor node can be obtained via wireless sensor networks. Additionally, thresholds to determine whether the slope will be stable or not are proposed using finite element analysis. It is expected that the landslide prediction system by wireless senor network can provide early warnings when landslides such as debris flow occurs.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.5
• /
• pp.481-486
• /
• 2007

Wireless Sensor Network(WSNs) consists of small sensor nodes with sensing, computation, and wireless communication capabilities. The large number of sensor nodes in a WSN means that there will often be some nodes which give erroneous sensor data owing to several reasons such as power shortage and transmission error. Generally, these sensor data are gathered by a sink node to monitor and diagnose the current environment. Therefore, this can make it difficult to get an effective monitoring and diagnosis. In this paper, to overcome the aforementioned problems, intelligent sensor data validation method based on PCA(Principle Component Analysis) is utilized. Furthermore, a practical implementation using embedded system is given to show the feasibility of the proposed scheme.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.731-734
• /
• 2011

This paper proposed the Low power configuration of Single hop WSN(Wireless Sensor Network) system. When the RF communication is done each tag node during the WSN systems operating, power consumption is greatest. There for, if you configure the Network with the RF communication module turn on/off periodically, power consumption less then operating the module all the time without it toggles. However, some data omissions may occur in which transmission and receipt is done. So this paper proposed the algorithm for low power system without data omissions.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.83-90
• /
• 2009

Wireless Sensor Network (WSN) is a wireless network that gathers information from remote area with autonomously configured routing path. We propose a fusion based routing for a 'convergecast' in which all sensors periodically forward collected data to a base station. Previous researches dealt with only full-fusion or no-fusion case. Our Fusion rate based Spanning Tree (FST) can provide effective routing topology in terms of total cost according to all ranges of fusion rate f ($0{\leq}f{\leq}1$). FST is optimum for convergecast in case of no-fusion (f = 0) and full-fusion (f = 1) and outperforms the Shortest Path spanning Tree (SPT) or Minimum Spanning Tree (MST) for any range of f (0 < f < 1). Simulation of 100-node WSN shows that the total length of FST is shorter than MST and SPT nearby 31% and 8% respectively in terms of topology lengths for all range of f. As a result, we confirmed that FST is a very useful WSN topology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.4
• /
• pp.670-675
• /
• 2018

There is a growing interest in EH-WSN (energy-harvesting wireless sensor networks) that can solve power problems in wireless sensor networks. In EH-WSN, on-off duty cycling is being studied in order to balance energy harvesting and consumption. However, the urgency of the sensed data and the energy harvesting rate in the environmental monitoring EH-WSN are important factors to determine the network performance. Therefore, it is necessary to control the duty-cycle period according to the importance of the sensed data and the energy harvesting rate in addition to simply maintaining the balance of the power. In this paper, we analyze the problem of on-off duty cycling in EH-WSN for environmental monitoring and propose an adaptive duty-cycle scheduling scheme considering the priority of sensed data and energy harvesting rate, where the priority of sensed data determined by sensed value and changing rate. The performance of scheduling scheme was analyzed by computer simulations.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.01a
• /
• pp.77-80
• /
• 2015

무선통신을 기반으로 하는 WSN은 통신의 특성상 네트워크보안에 취약점을 가진다. 무선통신의 취약점은 누구나 네트워크에 접근이 가능하다는 것이다. 이에 따라 침입에 강인한 무선 센서 네트워크인 INtrusion-tolerant routing protocol for wireless SEnsor NetworkS(INSENS)가 제안됨으로써 WSN의 초기 라우팅 설정 시 침입하는 공격자를 사전에 차단할 수 있게 되었다. 그러나 라우팅 설정 후에 노드가 공격자에 의해 훼손당하게 된다면, 노드의 주요정보를 이용해 공격자는 또다시 라우팅 공격이 가능해진다. 본 논문에서는 공격자에 의해 훼손된 노드가 라우팅 공격 중 대표적인 공격인 싱크홀 공격 메시지를 방송하였을 때, 페어와이즈 키를 통해 효과적으로 공격메시지를 차단하는 양방향인증기법을 제안한다. 이로써 INSENS에서 발생하는 싱크홀 공격을 차단함으로써 WSN의 보안 강화에 기여한다.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.9 no.4
• /
• pp.193-203
• /
• 2014

This paper implements a weather monitoring system based on wireless sensor network. The wireless sensor network protocol proposed in this paper adopts a TDMA styled MAC. The protocol is designed to balance the energy consumption among sensor nodes. Other purposes of the protocol are to avoid the hidden terminal problem in 2-hop star topology, and to allow a CSMA styled communication in a given time slot to support emergent messages. Also, this paper develops the hardware of sensor node, gateway and electric generator based on solar and windy energy. The test results on the implemented system show that the time slot of each node is shifted in circular manner to balance the waiting time for transmission, and the reliability of wireless communication is over 99%.

• ETRI Journal
• /
• v.38 no.6
• /
• pp.1145-1152
• /
• 2016

Because the nodes in a wireless sensor network (WSN) are mobile and the network is highly dynamic, monitoring every node at all times is impractical. As a result, an intruder can attack the network easily, thus impairing the system. Hence, detecting anomalies in the network is very essential for handling efficient and safe communication. To overcome these issues, in this paper, we propose a rule-based anomaly detection technique using roaming honeypots. Initially, the honeypots are deployed in such a way that all nodes in the network are covered by at least one honeypot. Honeypots check every new connection by letting the centralized administrator collect the information regarding the new connection by slowing down the communication with the new node. Certain predefined rules are applied on the new node to make a decision regarding the anomality of the node. When the timer value of each honeypot expires, other sensor nodes are appointed as honeypots. Owing to this honeypot rotation, the intruder will not be able to track a honeypot to impair the network. Simulation results show that this technique can efficiently handle the anomaly detection in a WSN.