• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.628-631
• /
• 2002

This paper describes a wireless point of production(POP) system using Bluetooth that is used as a tool of a new wireless interface. We developed the wireless POP system that is composed of POP terminal and control software. The POP terminal wirelessly collects the shop floor information in real-time. And the control software helps to make appropriate decisions based on the collected information by the POP terminal. The software is developed by using Visual C＋＋ programming language. A case study is implemented to show the performance of the developed system.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.27-28
• /
• 2007

In this paper, the Wireless Sensor Network (WSN) based on ZigBee technology was devised and developed. Wireless communication was applied to petrochemical domain, like other industries. And sensor network of IEEE 802.15.4 protocol stack diagram was described. Then, by analyzing the protocol, the software systems included the communication Protocol and point-to-point network were implemented with Freescale Semiconductor's product MC13192-SARD DSK board. After that, the performance of this design system was evaluated, and finally, by using PC Graphic User Interface (GUI) and IDE CW08 V3.1 programming tool, the real time communication data and the curve function were displayed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.8
• /
• pp.867-875
• /
• 2009

A wireless sensor network inherently comprises a plurality of sensor nodes widely deployed for sensing environmental information. To add new functions or to correct some faulty functions of an existing wireless sensor network, the firmware for each sensor node needs to be updated. Firmware update would be quite troublesome if it requires the gathering, reprogramming, and redeploy of all of already deployed sensor nodes. Over-the-air programming (OTA) facilitates the firmware update process, thereby allowing convenient maintenance of an already-deployed sensor network. This paper proposes and implements a remote firmware update mechanism for a TDMA-based wireless sensor network, in which the firmware for sensor nodes constituting the TDMA-based sensor network can be easily updated and the update process can be conveniently monitored from a remote site. We verify the validity of the proposed firmware update method via experiments and introduce three wireless sensor networks installed in outdoor sites in which the proposed firmware update mechanism has been exploited.

• Journal of Practical Engineering Education
• /
• v.12 no.1
• /
• pp.85-91
• /
• 2020

SW which controls IoT devices using wireless communication technology must operate without errors. In order for IoT devices to be widely used, the technical skills of engineers who design such software must be improved. Compared to designing the input / output SW of a single device, the SW Flowchart design and Java SW programming process that clearly define various input / output relations between the transmitter and the receiver are complicated. In this paper, we proposed a SW Flowchart design method for controlling IoT devices based on wireless communication. In this process, it is explained that the entire control algorithm is implemented through a problem division process. In addition, we proposed an educational method for programming the designed SW Flowchart into Java SW using Microbits, which are educational IoT devices. In the course to which this education method was applied, the results of satisfaction evaluation of students were analyzed, and the effectiveness of the IoT device control SW education method using Microbits was analyzed.

• Journal of the Korean Society of Radiology
• /
• v.1 no.1
• /
• pp.39-44
• /
• 2007

In this study, wireless measurement technique for human motion was developed to monitor movement disorder patients during their daily life. MICA, TinyOS, and nesC, developed by UC Berkeley, were used as wireless sensor, its software platform, and programming language. The human motion data, generated by two axial accelerometer(ADXL202) was transmitted to PDA(iPaq3630) by 916Mhz short range communication chip(TR1000). It could be stored at PDA by simple Windows CE programming. To test the developed device, it was attached at human chest and the acquired data was shown as a graph during his motion of sitting, standing, and lying. The result showed that human motion could be logged without any hooking and constraints. Therefore, this device can be used to monitor patient's movement disorder and activity of daily life(ADL).

• Smart Media Journal
• /
• v.4 no.2
• /
• pp.46-54
• /
• 2015

Communication between ECUs (Electronic Control Units) in agricultural machineries tends to use IS011783 widely, that is PGN (Parameter Group Number) based communication protocol lays on CAN protocol by altering its identifier part. Messages in line are transferred and received between ECUs according to ISO11783 standard. This paper discusses about design of wireless monitoring system. We used an ARM Cortex-M3 microcontroller embedded development board and marvel8686 wireless module. The wireless ISOBUS monitoring system, attached to communication line, reads messages, interpret them, and display them on the screen in easily comprehendible form. It can be used to generate messages and monitor the traffic on physical bus systems. The monitoring system connected to ECUs, monitor and simulate real traffic of communication and functionality of the ECUs. In order to support our work, we have implemented the monitoring tool. The development consists of two parts: GUI of the application and firmware level programming. Hence the monitoring system is attached to the communication line and equipped by Wi-Fi module; farmer/dispatcher in a farm monitors all messages in communication line on personal computer and smart device.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.10
• /
• pp.58-66
• /
• 2010

This paper shows an implementation and management result of wireless networks based security light control system, which performs a great role in protection of pedestrians and prevention of crime. Conventional security light units have severe limits in confirmation and inspection of security light unit failure, like wilful damage by someone or failure by influence of other equipment or failure by spontaneous heat-increase, and so on. In addition, local government offices are responsible for maintenance of security light units and as a matter of fact, most of civil complaints are about security light units. It is an obvious that the existing security light maintenance system reaches the limit and the security light maintenance problem is a difficulty of local government. Therefore, efficient security light control system is needed, which enables central control and intelligent maintenance. Moreover, the system has to be easy to control and has to be stable. In this study, wireless sensor network based security light control system is implemented, which is independent of programming language and platform, and which is simple to control and extend the system. The proven protocols, HTTP and SOAP, are utilized in order to improve the system reliability. This paper shows the excellence of our proposed system by implementing and operating it in real environment.

• Journal of Communications and Networks
• /
• v.10 no.4
• /
• pp.451-454
• /
• 2008

Ultra-wideband (UWB) radios have attracted great interest for their potential application in short-range high-data-rate wireless communications. High received signal to noise ratio and compliance with the Federal Communications Commissions (FCC) spectral mask call for judicious design of UWB pulse shapers. In this paper, even and odd order derivatives of Gaussian pulse are used respectively as base waveforms to produce two synthesized pulses. Our method can realize high efficiency of spectral utilization in terms of normalized effective signal power (NESP). The waveform design problem can be converted into linear programming problem, which can be efficiently solved. The waveform based on even order derivatives is orthogonal to the one based on odd order derivatives.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.51-58
• /
• 2010

Wireless Mesh Network has drawn much attention due to wide area service coverage with low system cost. However, there is a bottleneck problem in wireless mesh network since the traffic is aggregated into a gateway. Placement of multi-radio can easy the bottleneck problem, but without careful design it results in unnecessary system cost increasement. In this paper, we propose a system cost minimization through differential antenna placement where optimum antenna placement is determined by the required wireless link capacity. With CPLEX program, optimum number of antennae is determined as a function of local user traffic and gateway capacity. From numerical analysis, it is confirmed that our proposed model can solve bottleneck problem, and at the same time save the system cost.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.5
• /
• pp.523-529
• /
• 2009

Smart sensor is known as intelligent sensor, it is different with other conventional sensors in the case of intelligent system embedded on it. Smart sensor has many benefits e.g. low-cost in usage, self-decision and self-diagnosis abilities. This sensor consists of perception element(sensing element), signal processing and technology of communication. In this work, a bridge and structure of smart sensor has been investigated to be capable to condition monitoring routine. This investigation involves low power consumption, software programming, fast data acquisition ability, and authoritativeness warranty. Moreover, this work also develops smart sensor to be capable to perform high sampling rate, high resolution of ADC, high memory capacity, and good communication for data transfer. The result shows that the developed smart sensor is promising to be applied to various industrial fields.