• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.1
• /
• pp.49-54
• /
• 2010

3GPP(Third Generation Partnership Project) LTE system that is the next step forward in cellular 3G services address the issues related to power saving at LTE base station. This is because that most of the energy in a typical telecommunication network is consumed by the wireless network's base station site. Power saving at LTE base station fall in with low-carbon green technology. This thesis proposes a power saving MAC protocol for LTE base station which utilizes different graded DRX/DTX(Discontinuous. Reception/Transmission). Considering traffic type in UE, proposed MAC protocol controls adaptive DRX/DTX cycle. The proposed method is more improve power saving performance than another method which is unchanged DRX/DTX by conditions. In this thesis, I propose an power saving MAC protocol in an environment where LTE base station are communicated with UE and prove improvement in performance through simulations.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.219-219
• /
• 2008

Energy harvesting from the environment has been of great interest as a standalone power source of wireless sensor nodes for ubiquitous sensor networks (USN). There are several power generating methods such as thermal gradients, solar cell, energy produced by human action, mechanical vibration energy, and so on. Most of all, mechanical vibration is easily accessible and has no limitation of weather and environment of outdoor or indoor. In particular, the piezoelectric energy harvesting from ambient vibration sources has attracted attention because it has a relative high power density comparing with other energy scavenging methods. Through recent advances in low power consumption RF transmitters and sensors, it is possible to adopt a micro-power energy harvesting system realized by MEMS technology for the system-on-chip. However, the MEMS energy harvesting system hassome drawbacks such as a high natural frequency over 300 Hz and a small power generation due to a small dimension. To overcome these limitations, we devised a novel power generator with a spiral spring structure. In this case, the energy harvester has a lower natural frequency under 200 Hz than a normal cantilever structure. Moreover, it has higher an energy conversion efficient because shear mode ($d_{15}$) is much larger than 33 mode ($d_{33}$) and the energy conversion efficiency is proportional to the piezoelectric constant (d). We expect the spiral type MEMS power generator would be a good candidate as a standalone power generator for USN.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.6 s.348
• /
• pp.23-29
• /
• 2006

It is difficult to apply conventional security algorithms to the wireless sensor networks composed of nodes that have resource constraints such as memory, computing, power resources limitation. Generally, shared key based algorithms with low resource consumption and short key length are used for broadcast packets in authentication of base station. But it is not suitable that all the nodes hold the same shared key only for packet authentication. Recently, broadcast authentication algorithm for sensor network is proposed, which uses key chain generation by one-way hash function, Message Authentication Code generation by each keys of the key chains and delayed key disclosure. It provides suitable authentication method for wireless sensor networks but may leads to inefficient consequence with respect to network conditions such as broadcast ratio, key chain level, and so on. In this paper, we propose an improved broadcast authentication algorithm that uses key chain link and periodical key disclosure. We evaluated the performance of proposed algorithm using TOSSIM(TinyOS Simulator) in TinyOS. The results show that the proposed algorithm ensures low authentication delay, uses memory and computing resource of receiving nodes efficiently and reduces the amount of packet transmitting/receiving.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03a
• /
• pp.7-7
• /
• 2010

Energy harvesting from the environment has been of great interest as a standalone power source of wireless sensor nodes for Ubiquitous Sensor Networks(USN). In particular, the piezoelectric energy harvesting from ambient vibration sources has intensively researched because it has a relatively high power density comparing with other energy scavenging methods. Through recent advances in low power consumption RF transmitters and sensors, it is possible to adopt a micro-power energy harvesting system realized by MEMS technology for the system-on-chip. However, the MEMS energy harvesting system has some drawbacks such as a high natural frequency over 300 Hz and a small power generation due to a small dimension. To overcome these limitations, we devised a novel power generator with a spiral spring structure as shown in the figure. The natural frequency of a cantilever could be decreased to the usable frequency region (under 300 Hz) because the natural frequency depends on the length of a cantilever. In this study, the natural frequency of the energy harvester was a lower than a normal cantilever structure and sufficiently controllable in 50 - 200 Hz frequency region as adjusting weight of a proof mass. Moreover, the MEMS energy harvester had a high energy conversion efficiency using a shear mode ($d_{15}$) is much larger than a 33 mode ($d_{33}$) and the energy conversion efficiency is proportional to the piezoelectric constant (d). We expect the spiral type MEMS power generator would be a good candidate for a standalone power generator for USN.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.38-44
• /
• 2014

In this paper, we designed a multiband monopole antenna for next-generation WLAN system. In conventional WLAN system, UWB antennas were used together, and, because the radiation occurs in different parts depending on the antenna structure, it has the disadvantage of having an unstable impulse response characteristic due to dispersion characteristics. Although a UWB antenna that has suitable radiation pattern for WLAN band, it does not have good impedance matching and has severe echo. Therefore, in this paper, a monopole antenna was designed by using CPW power feed so that various impedances can be easily implemented when designing an antenna and more parameters can be derived that can be used for design for optimal performance.

• Journal of Communications and Networks
• /
• v.16 no.5
• /
• pp.523-533
• /
• 2014

Orthogonal frequency division multiple access (OFDMA) is a promising technique, which can provide high downlink capacity for the future wireless systems. The total capacity of OFDMA can be maximized by adaptively assigning subchannels to the user with the best gain for that subchannel, with power subsequently distributed by water-filling. In this paper, we propose the use of composite differential evolution (CoDE) algorithm to allocate the subchannels. The CoDE algorithm is population-based where a set of potential solutions evolves to approach a near-optimal solution for the problem under study. CoDE uses three trial vector generation strategies and three control parameter settings. It randomly combines them to generate trial vectors. In CoDE, three trial vectors are generated for each target vector unlike other differential evolution (DE) techniques where only a single trial vector is generated. Then the best one enters the next generation if it is better than its target vector. It is shown that the proposed method obtains higher sum capacities as compared to that obtained by previous works, with comparable computational complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4B
• /
• pp.275-280
• /
• 2002

Wireless communications have been developed time and time to satisfy more demands of users for internet service, mobile communication service and so on. One of infrastructures leading the next generation wireless communication is HAPS(High Altitude Platform Station). This paper analyzed outage probability when a mobile communication system was constructed by using HAPS. First, an approach to evaluate the carrier to interference power ratio' was introduced and results from the analysis were calculated and simulated. from the results, carrier to interference power ratio (C/I) and fading depth (K) had an effect on outage probability; outage probability decreases when K increases far constant C/I or C/l increases for constant K. In addition, when outage probability for a platform with elevation 30 degrees is expanded into it for 24-platforms, outage probability(C/I=9.8dB) was worse because of many interferers relatively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2095-2100
• /
• 2012

In this paper, we propose the channel sounding scheme which is made for ideal communication between some application as well as the short distance of high speed data transmission in MIMO-OFDM system for Wireless PAN. This method is able to perceive the duration of the impulse response through the delaying of power delay profile, modeled a power delay profile which has an attenuate characteristic, and obtained the coefficient of channel response by ML (maximum likelihood). Through the amplitudes, phases and delays associated with each multipath component which were acquired from this channel sounding scheme, we can describe the wave propagation characteristics of channels between the transmitter and receiver so that the receiver could enhance not only the reliability but also the ability of communication link. Multi agent system models can be used to analyze the path of the system within any time frame. Further, parameter values can be perturbed to examine how the path of the system changes in response to exogenous shocks.

• The KIPS Transactions:PartC
• /
• v.12C no.2 s.98
• /
• pp.235-242
• /
• 2005

As the demands in a wireless network are recently increasing, it is necessary to promote the power efficiency of a wireless terminal, and to reduce the overhead of a network. To resolve such problems, we propose the paging technology and the structure of paging area with the joint access point in HPi (High-speed Portable Internet) network, which is being studied as the domestic next-generation IP packet data network. The application of the paging technology to the HPi network possesses the advantage of reducing the registration cost while a terminal in dormant state moves around, and the reporting cost of the terminal's location by the joint access point. The technology suggested in this paper causes the advantages that it promotes the power efficiency in user's point of view while it reduces the network overhead and makes the easy rearrangement of joint APs according to the changes of users' moving pattern in the network manager's point of view.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.283-288
• /
• 2018

In this paper, it is required that the next generation wireless transmission system can support a large number of users without distortion of transmission signal with high data rate in various different propagation environment while using limited resources as efficiently as possible, and therefore an efficient transmission system is continuously required. Because of the large amount of data to be handled in a limited frequency band, a very complex digital modulation scheme is adopted. the linearity of the power amplifier determines the linearity of the entire communication system, and thus a linear amplifier is required. In cognitive radion systems, there is a power control issue in the relationship between primary and secondary users. This problem is solved by simulating the communication system so as to select the cognitive radio power while power control while overcoming linearity by using feed-forward PA.