• The Journal of the Korea Contents Association
• /
• v.13 no.1
• /
• pp.30-39
• /
• 2013

In recent years, with the development of devices to collect multimedia data such as small CMOS camera sensor and micro phone, studies on wireless multimedia sensor network technologies and their applications that extend the existing wireless sensor network technologies have been actively done. In such applications, various basic schemes such as the processing, storage, and transmission of multimedia data are required. Especially, a security for real world environments is essential. In this paper, in order to defend the sniffing attack in various hacking techniques, we propose a multipath routing scheme for physically avoiding the data transmission path from the risk factors. Our proposed scheme establishes the DEFCON of the sensor nodes that are geographically close to risk factors and the priorities according to the importance of the data. Our proposed scheme performs risk factor detour multipath routing through a safe path considering the DEFCON and data priority. Our experimental results show that although our proposed scheme takes the transmission delay time by about 5% over the existing scheme, it reduces the eavesdropping rate that can attack and intercept data by the risk factor by about 18%.

• Journal of Korea Multimedia Society
• /
• v.12 no.12
• /
• pp.1778-1786
• /
• 2009

Many sensor network applications have been developed for smart home, disaster management, and a wide range of other applications. These applications, however, generally assume a fixed base station as well as fixed sensor nodes. Previous research on sensor networks mainly focused on efficient transmission of data from sensors to fixed sink nodes. Recently there has been active research on mobile sink nodes, sink mobility is one of the most comprehensive trends for information gathering in sensor networks, but the research of an environment where both fixed sink nodes and mobile sinks are present at the same time is rather scarce. This paper proposes a scheme for context-aware by ubiquitous devices with the sink functionality added through fixed sinks under a previously-built, cluster-based multi-hop sensor network environment. To this end, clustering of mobile devices were done based on the fixed sinks of a previously-built sensor network, and by using appropriate fixed sinks, context gathering was made possible. By mathematical comparison with TTDD routing protocol, which was proposed for mobile sinks, it was confirmed that performance increases by average 50% in energy with the number of mobile sinks, and with the number of movements by mobile devices.

• Journal of Korea Multimedia Society
• /
• v.22 no.6
• /
• pp.676-683
• /
• 2019

Wireless Sensor Networks (WSNs) consist of multiple tiny and power constrained sensors which use radio frequencies to carry out sensing in a designated sensor area. To effectively design and implement reliable WSN, it is critical to consider models, protocols, and algorithms that can optimize energy consumption of all the sensor nodes with optimal amount of packet delivery. It has been observed that deploying a single sink node comes with numerous challenges especially in a situation with high node density and congestion. Sensor nodes close to a single sink node receive more transmission traffic load compared to other sensors, thus causing quick depletion of energy which finally leads to an energy hole and sink hole problems. In this paper, we proposed the use of multiple energy efficient sink nodes with brute force technique under optimized parameters to improve on the number of packets delivered within a given time. Simulation results not only depict that, deploying N sink nodes in a sensor area has a maximum limit to offer a justifiable improvement in terms of packet delivery ratio but also offers a reduction in End to End delay and reliability in case of failure of a single sink node, and an improvement in the network lifetime rather than deploying a single static sink node.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.4
• /
• pp.109-116
• /
• 2014

In recent, ISM (Industrial Scientific Medical) band that is 2.4GHz band authorized free of charge is being widely used for smart phone, notebook computer, printer and portable multimedia devices. Accordingly, studies have been continuously conducted on the possibility of coexistence among nodes using ISM band. In particular, the interference of IEEE 802.11b based Wi-Fi device using overlapping channel during communication among IEEE 802.15.4 based wireless sensor nodes suitable for low-power, low-speed communication using ISM band causes serious network performance deterioration of wireless sensor networks. This paper examined a method of identifying channel status to avoid interference among wireless communication devices using IEEE 802.11b (Wi-Fi) and other ISM bands during communication among IEEE 802.15.4 based wireless sensor network nodes in ISM band. To identify channels occupied by Wi-Fi traffic, various studies are being conducted that use the RSSI (Received Signal Strength Indicator) value of interference signal obtained through ED (Energy Detection) feature that is one of IEEE 802.15.4 transmitter characteristics. This paper examines an algorithm that identifies the possibility of using more accurate channel by mixing utilization of interference signal and RSSI mean value of interference signal by wireless sensor network nodes. In addition, it verifies such algorithm by using OPNET Network verification simulator.

• Journal of Korea Multimedia Society
• /
• v.16 no.3
• /
• pp.354-365
• /
• 2013

Node deployment is one of the important problems in achieving good quality of service in wireless sensor network. The purpose of this paper is to develop an interactive system that supports user's decision makings in designing sensor fields. The system provides grid-based initial deployment algorithm supporting three types of node deployment pattern, area-fill, path-cover, and barrier-cover deployment pattern. After initial deployment, an iterative refinement algorithm can be applied, which takes care of the irregularity of the deployment area and the heterogeneity of sensors. The proposed system helps users to effectively deploy nodes in the sensor field, analyse the detection performance of the deployment, and perform network simulations. The developed system can be utilized as a part of the development environment of the surveillance sensor network system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.631-634
• /
• 2009

Recent advances in wireless communication, electronics, MEMS device, sensor and battery technology have made it possible to manufacture low-cost, low-power, multi-function tiny sensor nodes. A large number of tiny sensor nodes form sensor network through wireless communication. Sensor networks represent a significant improvement over traditional sensors, research on Zigbee wireless image transmission has been a topic in industrial and scientific fields. In this paper, we design a Zigbee wireless image sensor node and multimedia monitoring server system. It consists of embedded processor, memory, CMOS image sensor, image acquisition and processing unit, Zigbee RF module, power supply unit and remote monitoring server system. In the future, we will further improve our Zigbee wireless image sensor node and monitoring server system. Besides, energy-efficient Zigbee wireless image transmission protocol and interworking with mobile network will be our work focus.

• Journal of Korea Multimedia Society
• /
• v.14 no.7
• /
• pp.949-963
• /
• 2011

Generally, It is indispensible to use an ISP(In System Programming) tool for upgrading, patching, or changing the system software of the each sensor nodes in wireless sensor networks. While under a small number of nodes, the upgrading task is not a serious burden, however if there are a large number of nodes to be updated, the task is almost impossible to do for the given constrains such as limited budgets and resources. Based on this observation, in this paper we have proposed a novel upgrading scheme based on a single hop in IEEE 802.15.4 PAN(Personal Area Network)s. Simulation results have shown the scheme outcomes the conventional methods in the performance measures.

• Journal of Digital Convergence
• /
• v.11 no.5
• /
• pp.313-318
• /
• 2013

QoS in wireless multimedia sensor networks is an important issue to enhance streaming media service. This paper proposes a new 2-layer based QoS evaluation scheme for enhancing the streaming media QoS of wireless multimedia sensor networks. The proposed scheme performs the fuzzy relevance to control the streaming between application layer and network layer, and it performs 2-layer mapping process to enhance the transmission reliability and throughput. The simulation results show that the proposed scheme achieves improved performance in packet control ratio, transmission reliability, and delay overhead ratio compared with those of other existing schemes.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.2
• /
• pp.289-296
• /
• 2015

Wireless multimedia sensor network senses and transfers mass multimedia data. Also, it is sensitive to latency. This thesis proposes a routing technique based on traffic priority in order to improve the network efficiency by minimizing latency. In addition, it proposes a congestion control mechanism that uses packet service time, packet inter-arrival time, buffer usage, etc. In this thesis, we verified the reduction of packet latency in accordance with the quality level of packet as a result of the performance analysis through the simulation method. Also, we verified that the proposed mechanism maintained a reliable network state by preventing packet loss due to network overload.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.141-146
• /
• 2008

Recently, it is studying to provide to users through internet in the SensorWeb of OGC(Open Geospatial Consortium) saving and maintaining data and image information gathered from sensor network. It is necessary to study about data convergence as binding audio and video for delivering the sensing data and image information to users with real-time system. In this article, it suggests how to convergence sensing data and moving picture collected from the sensor network using index. This program indicates both of them that collected sensing data and information identified of moving picture in the integration index and based on this program provides sensing data moving picture at the same time referencing integration index, if the user asks. To verify suggested method designing real-time multimedia service structure using sensor network and image installation and implementing Ubiquitous realtime multimedia system integrating moving picture and sensing data based on index. As a result of this program, it is confirmed providing real-time multimedia service to request information of application service using integration index collected image and sensing data from wireless sensor network and image installation suggested data convergence method.