• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.53-57
• /
• 2013

The quality of service for the voice and data communication is one of the most important elements in the mobile cellular networks. This quality has the time varying characteristics depending on the wireless network environments. In order to guarantee the quality of service at the predefined level, the mobile service provider needs to collect all the information about the level of quality served by the local base stations. In the conventional method the information on the service quality is measured and collected by the moving vehicle adopting the global positioning device. However this method requires relatively high cost and does not cover all the service areas. In this paper a new method is proposed utilizing a measurement node with local area communication transceiver and the mobile user equipment. In the proposed method the node communicates with the user equipment periodically to monitor the information on the service quality. The resulting information is reported to the measurement server in the mobile network. This method could be applied to either the circuit or the packet based networks. It also has an advantage in terms of the cost efficiency compared to the conventional method considering the required the equipment and the human resources.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.401-407
• /
• 2006

In this paper, we present a small-sized and light weighted dual-band antenna for an access point of 2.4/5 GHz dual-band WLAN(Wireless Local Area Network). The antenna for WLAN should show the characteristic of omni-directional radiation pattern. First, to obtain the omni-directional radiation pattern the proposed dual-band antenna has an orthogonal inverted triangular type element at the center and locates four resonating elements symmetrically around it. Also, for the purpose of easy manufacturing and miniaturization of the antenna, we changed the central element which had the orthogonal inverted triangular type structure into the plate type. Measured $S_{11}$ for the proposed dual-band plate type antenna showed characteristic which was less then -12.8 dB for WLAN frequency bands. Measured results for the maximum gain showed 3.17 dBi at 2.44 GHz, 5.38 dBi at 5.77 GHz with omni-directional radiation pattern. The implemented antennas showed applicable performances for the access point of WLAN.

• The KIPS Transactions:PartC
• /
• v.13C no.5 s.108
• /
• pp.607-612
• /
• 2006

Universal Mobile Telecommunications System (UMTS) and Wireless Local Area Network (WLAN) have been developed independently. Then, many researchers have studied UMTS-WLAN interworking architecture for the efficiency. However, the transmission capacity difference of two networks causes the transmission quality degradation. Therefore, this paper proposes a UMTS-WLAN interworking architecture for Quality of Service (QoS). The proposed architecture is based on tight coupling and dynamically guarantees QoS by the mobility prediction method. The proposed architecture is simulated by ns-2. Performance experimental results show that the proposed architecture reduces the handover dropping probability comparing with the existing method and enhances the amount of receiving packets comparing with the method without guaranteeing QoS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1659-1665
• /
• 2019

In this paper, a novel design of a compact printed monopole antenna for wireless local area network (WLAN) applications is investigated. The radiator with a patch of different line width and step-shaped ground planes is used to reduce the antenna size. The size of the antenna is 16 × 17 × 1 ㎣ and is fabricated with a photolithography technique. The simulated and measured results agree well. The resonant frequency of the investigated antenna is about 5.2 GHz and can cover an impedance bandwidth of 1 GHz for the measurement result. In addition, we presented the measured radiation pattern, presented the gain and efficiency measured in the required WLAN 5 GHz frequency band (5.15-5.825 GHz), and confirmed that it can be used as a 5 GHz band WLAN antenna. The investigated antenna has a small size, light weight, low cost, omni-directional radiation pattern, high gain, and high efficiency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.807-815
• /
• 2019

In this paper, we design a power amplifier to support quad-band in wireless communication devices using RF CMOS 180-nm process. The proposed power amplifier consists of low-band 0.9, 1.8, and 2.4 GHz and high-band 5 GHz. We proposed a structure that can support each input matching network without using a switch. For maximum linear output power, the output matching network was designed for impedance conversion to the power matching point. The fabricated quad-band power amplifier was verified using modulation signals. The long-term evolution(LTE) 10 MHz modulated signal was used for 0.9 and 1.8 GHz, and the measured output power is 23.55 and 24.23 dBm, respectively. The LTE 20 MHz modulated signal was used for 1.8 GHz, and the measured output power is 22.24 dBm. The wireless local area network(WLAN) 802.11n modulated signal was used for 2.4 GHz and 5.0 GHz. We obtain maximum linear output power of 20.58 dBm at 2.4 GHz and 17.7 dBm at 5.0 GHz.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.130-134
• /
• 2007

DCF(Distributed Coordination Function) of IEEE 802.11 WLAN(Wireless Local Area Network) MAC Layer apply to CSMA/CA(Carrier Sense Multiple Access with Collision Avoidance) for solution of collision when the station try to access at the same time. But DCF happens falling performance as increasing a number of stations. In this paper, we suggest algorithm that improved performance in congestion. And we compare DCF, DCF+ and proposed algorithm respect to saturation throughput, delay, collision rate and drop rate using NS2(Network Simulator 2) simulation tool.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.243-245
• /
• 2005

This paper presents a wired and wireless linked remote control system. Ethernet based network communication is used for long distance management and 2.4GHz RF network is adopted for the local area communication between the main network and the ballast. For the effective remote control and management including dimming using wired and wireless linked digital communication networks, control circuit of the ballast is implemented with fully digital circuit using MCU and EPLD. In this paper, the proper frame structure is proposed for the digital-remote lighting-control system and the detailed system configurations including fully digital controlled ballast for the induction lamp are described.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.11
• /
• pp.21-27
• /
• 2004

In this paper, millimeter-wave monolithic integrated circuit(MIMIC) low noise amplifier(LNA) for V-band, which is applicable to 60 GHz wireless local area network(WLAN), was fabricated using the high performance 0.1 ${\mu}{\textrm}{m}$ $\Gamma$-gate pseudomorphic high electron mobility transistor(PHEMT). The DC characteristics of PHEMT are drain saturation current density(Idss) of 450 mA/mm and maximum transconductance(gm, max) of 363.6 mS/mm. The RF characteristics were obtained the current gain cut-off frequency(fT) of 113 GHz and the maximum oscillation frequency(fmax) of 180 GHz. V-band MIMIC LNA was designed using active and passive device library, which is composed of 0.1 ${\mu}{\textrm}{m}$ $\Gamma$-gate PHEMT and coplanar waveguide(CPW) technology. The designed V-band MIMIC LNA was fabricated using integrated unit processes of active and passive device. The measured results of V-band MIMIC LNA are shown S21 gain of 21.3 dB, S11 of -10.6 dB at 60 GHz and S22 of -29.7 dB at 62.5 GHz. The measured result of V-band MIMIC LNA was shown noise figure (NF) of 4.23 dB at 60 GHz.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.4
• /
• pp.13-17
• /
• 2004

As the usage of wireless LAN becomes common in working environment, the number of database systems that support both wired and wireless users increases rapidly. The characteristics of wireless LAN that its speed is slow relatively comparing to wired network and the users in its environment connects to different communication points as they moves creates another challenge to be resolved in database systems. In the environment of hybrid communication systems, wired and wireless for voluminous data amount and a number of users, the two layer architecture of the conventional client-server database systems has limitation in the system performance. This is due to that server is the only point of data service in client-server database systems. In this paper, we discuss a new extended database system architecture that data services are distributed among servers and clients based on user database access patterns in order to improve system performance. We analyze the expected system performance by using simulation technique and prove the practical utilization of the system by demonstrating experimental results.

• Journal of the Society of Disaster Information
• /
• v.1 no.1
• /
• pp.91-119
• /
• 2005

When the national disaster accident is occurred, it is difficult to maintain the mutual cooperation systems. In order to solve the problems, the construction of the national unified command wireless network is necessary. In this paper, the specified state of the characteristic frequency of the digital TRS wireless network constructed recently is investigated and analyzed. Through the analysis, the problems of the construction of the national unified command wireless network are grasped. To solve the problem, it is proposed that the digital TRS wireless network is connected with the satellite communication network, and connected with the existing wireless network, LMR. In the concretely it is proposed that the natural unified wireless network should be proceeded step by step. At first, for 2 years the existing networks of the Fire Fighting Agency, the Police, the Forest Service and so on must be utilized and prepared to link with TRS. The second, for 2 years it is carried forward a scheme to maintain the properties of the agencies concerned. Further, it must be prepared to connect with satellite network. At third, for 2 years all agencies concerned with the fire fighting and the disaster prevention must be unified, and the systems have to be promoted for the p1an of linkage of TRS network and the existing network. Next the agencies concerned have to be unified and the authority has to be intensified. When a disaster is occurred, the National Emergency Management Agency has to play a central role. In a local area it has to be given the Fire Fighting Agency an authority and a duty to get ready for each emergency situation.