• Journal of Computing Science and Engineering
• /
• v.7 no.4
• /
• pp.231-241
• /
• 2013

Improvements in wireless sensor network (WSN) technology have resulted in a large number of applications. WSNs have been mainly used for monitoring applications, but they are also applicable to target tracking, health care, and monitoring with multimedia data. Nodes are generally deployed in environments where the exhausted batteries of sensor nodes are difficult to charge or replace. The primary goal of communication protocols in WSNs is to maximize energy efficiency in order to prolong network lifetime. In this paper, various medium access control (MAC) protocols for synchronous/asynchronous and single/multi-channel WSNs are investigated. Single-channel MAC protocols are categorized into synchronous and asynchronous approaches, and the advantages and disadvantages of each protocol are presented. The different features required in multi-channel WSNs compared to single-channel WSNs are also investigated, and surveys on multi-channel MAC protocols proposed for WSNs are provided. Then, existing broadcast schemes in such MAC protocols and efficient multi-hop broadcast protocols proposed for WSNs are provided. The limitations and challenges in many communication protocols according to this survey are pointed out, which will help future researches on the design of communication protocols for WSNs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2718-2721
• /
• 2011

This research developed a remote communication system for automatic water meter reading and charge calculation from the field of a house or apartment complexes within the same district. Developed system was applied to perform measurements of the pulse-sensing technology, the minimum power consumption, temperature compensation, short-range wireless communications technology, the handset and wireless communication capabilities of the DB management embedded software to efficiently control. Through this reading-related tasks that are required in a temporal, material and human resources can be minimized.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.5
• /
• pp.105-110
• /
• 2020

The global battery market is rapidly growing due to the development of vehicles(EV) and wireless electronic products. In particular logistics robots, which hielp to produce EVs, have attracted much interest in research in Korea Because logistics sites and factories operate continuously for 24 hours, the technology that can dramatically increase the operation time of the logistics equipment is rapidly developing, and various high-level technologies are required for the batteries used in. for example, logistics robots. These required technologies include those that enable rapid battery charging as well wireless charging to charge batteries while moving. The development of these technologies, however, result in increasing explosions and topical accidents involving rapid charging batteries These accidents due to the thermal shock caused by the heat generated during the charging of the battery cell. In this study, a performance evaluation of a heat dissipation design using infrared thermal imaging was performed on an energy storage systrm(Ess) applied with an internal heat conduction cooling method using a heating plate.

• The KIPS Transactions:PartC
• /
• v.11C no.3
• /
• pp.379-386
• /
• 2004

The WAP 2.0 system is a newly proposed wireless communication system by the WAP Forum for interoperability across Internet environment and the system takes charge of communication between WAP terminals and existing origin Web servers. The purpose of this paper is 1) to construct a WAP 2.0 proxy proposed by the WAP Forum and 2) to improve the WAP Proxy in order to increase communication efficiency between wired and wireless communication objects. The Improved WAP proxy constructed in this study provides links between wired and wireless communication environments using the split-TCP concept. However, unlike the split-TCP connection, The improved WAP proxy maintains TCP's end-to-end semantics and reduces overhead by avoiding operations as much as possible on the upper protocol layer. In addition, The improved WAP proxy supports SACK(Selective Acknowledgement ) option and Timestamp option for speedy re-transmission which leads to reduction of performance degradation. After constructing the improved WAP proxy under Linux environment, experiments have been taken. The experimental results show that, compared with the experiments when a WAP proxy proposed by the WAP Forum is used, both data transmission delay time and data transmission size decrease to show that communication efficiency is increased. In particular, as packet missing ratio Increases, data transmission size decreases, which demonstrates that the improved WAP proxy is very effective for performance improvement in wireless communication environment.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.321-326
• /
• 2007

The contents of reef container face a risk of being damaged if the interior temperature and certain maintenance conditions for the shipments cannot be met. Currently, the temperature and other conditions within a reefer container is checked manually and periodically by someone in charge of it. Since it means that there is no real-time checking of the conditions, if something goes wrong, there is no immediate means of correcting the problem. This paper introduces reefer container monitoring system, that checks interior temperature of container on real-time by sensor nodes attaching reefer container using wireless sensor network. It senses the temperature, amount of light, motion and the change in speed of the objects that distributes sensors throughout the desired places and sends the data wirelessly to anyone interested. Because the prosed technique can check the temperature and other conditions within a reefer container on real-time basis, it enables efficient and effective maintenance of temperature and other conditions

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.890-893
• /
• 2010

In wireless sensor networks, each node generally uses a battery because it is hard to replace or charge. For this reason, study for life time prolongation of each node within the limited energy source has become an important issue. So many ways are suggested to minimize the energy consumption for each node, especially energy efficient MAC protocols have been studied actively. T-MAC of contention based MAC protocol is that added the adaptability on fixed duty cycle of S-MAC. T-MAC allocates the fixed timeout before each node goes to sleep mode from active mode. If no data exchanged in a timeout, each node goes to sleep mode. Because of the timeout is always fixed, the absence of data exchange in a timeout will cause unnecessary energy consumption. In this paper, in order to improve the energy efficiency, we propose a MAC protocol based on adaptive timeout that analyze the probability of the timeout, and provides the modified timeout.

• Restorative Dentistry and Endodontics
• /
• v.47 no.4
• /
• pp.45.1-45.10
• /
• 2022

Objectives: This study evaluated the relationship between the battery charge level and irradiance of light-emitting diode (LED) light-curing units (LCUs) and how these variables influence the Vickers hardness number (VHN) of a bulk-fill resin. Materials and Methods: Four LCUs were evaluated: Radii Plus (SDI), Radii-cal (SDI), Elipar Deep Cure (Filtek Bulk Fill, 3M Oral Care), and Poly Wireless (Kavo Kerr). Irradiance was measured using a radiometer every ten 20-second activations until the battery was discharged. Disks (4 mm thick) of a bulk-fill resin (Filtek Bulk Fill, 3M Oral Care) were prepared, and the VHN was determined on the top and bottom surfaces when light-cured with the LCUs with battery levels at 100%, 50% and 10%. Data were analyzed by 2-way analysis of variance, the Tukey's test, and Pearson correlations (α = 5%). Results: Elipar Deep Cure and Poly Wireless showed significant differences between the irradiance when the battery was fully charged versus discharged (10% battery level). Significant differences in irradiance were detected among all LCUs, within each battery condition tested. Hardness ratios below 80% were obtained for Radii-cal (10% battery level) and for Poly Wireless (50% and 10% battery levels). The battery level showed moderate and strong, but non-significant, positive correlations with the VHN and irradiance. Conclusions: Although the irradiance was different among LCUs, it decreased in half of the devices along with a reduction in battery level. In addition, the composite resin effectiveness of curing, measured by the hardness ratio, was reduced when the LCUs' battery was discharged.

• 한국HCI학회:학술대회논문집
• /
• 2007.02b
• /
• pp.159-164
• /
• 2007

일상생활 속에 익숙하게 자리 잡은지 오래인 모바일 폰은 이미 고유의 기능인 음성통화와 문자메시지에 대한 서비스가 포화상태 이르러 새로운 수익 창출산업으로 무선인터넷서비스가 각광받고 있는 실정이나, 초기 사용자들에게 부정적인 기대 불일치 경험을 누적시켜 소극적인 사용이나, 사용회피를 유도하는 등 아직까진 기대 이하의 성적을 거두고 있는 실정이다. 예상을 뛰어넘는 과도한 요금에 놀라 이후 무선인터넷 사용을 꺼리게 된 경험이나, 청소년들의 무분별한 무선인터넷 사용에 따른 사고 등 폐해들에 대한 기사 등은 이미 낯설거나 놀라운 뉴스가 아니며, 이러한 직 간접경험들로 인해 아예 무선인터넷을 경험해보고자 시도조차 하지 않는 잠재고객 또한 많은 것이 사실이다. 본 논문에선 설문과 실험을 통해 현재 모바일 사용자들의 무선인터넷 서비스에 대한 기대, 사용 패턴, 만족도 및 바램과 요금체계에 대한 이해도 등을 조사하고, ‘불확실성 회피성향’이 사용회피에 미치는 역효과를 증명하여, 요금체계와 관련한 서비스업계의 개선 방향 제시에 연구목적을 가진다.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.104-108
• /
• 2018

Lithium-ion batteries have been used in energy storage systems (ESS), electric vehicles (EVs), etc. due to their high safety, fast charging and long lifecycle. This paper aims to improve the convenience of users by changing the wired battery stack used in the battery pack, wirelessly using RFID, reducing the internal volume of the battery pack, reducing the size of the battery pack. In this paper, we propose a battery management system which can provide the flexibility of battery pack expansion and maintenance by using lithium ion battery, battery management system (BMS) and wireless communication for light weight of 1Kw small battery pack. Also, by flexibly arranging the cell layout inside the battery pack and designing to reduce the size of the outer shape of the battery pack.

• Journal of information and communication convergence engineering
• /
• v.3 no.1
• /
• pp.18-22
• /
• 2005

This paper presents the analog adaptive phase-locked loop (PLL) architecture with a new adaptive bandwidth controller to reduce locking time and minimize jitter in PLL output for wireless communication. It adaptively controls the loop bandwidth according to the locking status. When the phase error is large, the PLL increases the loop bandwidth and reduces locking time. When the phase error is small, the PLL decreases the loop bandwidth and minimizes output jitters. The adaptive bandwidth control is implemented by controlling charge pump current depending on the locking status. A 1.28-GHz CMOS phase-locked loop with adaptive bandwidth control is designed with 0.35 $mu$m CMOS technology. It is simulated by HSPICE and achieves the primary reference sidebands at the output of the VCO are approximately -80dBc.