• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.1
• /
• pp.93-98
• /
• 2020

Research on underwater sensor networks is increasing due to such reasons as marine resource management, maritime disaster prediction and military protection. Many underwater sensor networks performs wireless communication using an acoustic sound wave band signal having a relatively low frequency. So the digital part of their modem can take charge of carrier band signal processing. To enable this, the sampling rate of the baseband band signal should be increased to a sampling rate at which carrier band signal processing is possible. In this paper, we designed a sampling rate increasing circuit based on a CIC interpolator for underwater sensor nodes. The CIC interpolator has a simple circuit structure. However, since the CIC interpolator has a large attenuation of the pass band and a wide transition band, an inverse sinc LPF is added to compensate for frequency response of the CIC interpolator. The proposed interpolator was verified in time domain and frequency domain using ModelSim and Matlab.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.12
• /
• pp.179-184
• /
• 2018

In this paper, we have proposed the development of DC-DC converter for LRT power supply. First of all, we have studied converter technology, main functions and characteristics were determined. In also, the converter design was carried out to meet the system design conditions. Based on this design, converter simulation is performed to enable stable charging and discharging of the vehicle system. We have performed the Light-load test according to charge mode, discharge mode. As a result, the manufactured converter performance was verified through the load test, and it's stability was confirmed.

• Annual Conference of KIPS
• /
• 2007.05a
• /
• pp.855-857
• /
• 2007

In recent years, Wireless Mesh Network (WMN) is a compelling topic to many network researchers due to its low cost in deployment, ease and simplicity in installation and scalability and robustness in operation. In WMN, Gateway nodes (Access Point-AP) are in charge of steering the traffic from the external network (e.g. Internet...) to client devices or mesh clients. The limited bandwidth of wireless links between Gateways and intermediate mesh routers makes the Gateways becomes the bottleneck of the mesh network in both uplink stream and downlink stream. In this paper, we propose a mechanism to permit Gateways collaboratively work to manipulate the traffic to fit our network. They will move the traffic from congested links to the unused capacity on other links.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.566-572
• /
• 2020

In a wireless power transmitter, the characteristics and effects of wireless power transmission between two induction coils are investigated, and a power converter circuit and a battery charger/discharger circuit using wireless power transmission technology are proposed. The advantage of wireless power transmitters and wireless chargers is that, instead of the existing plug-in-mounted wired charger (OBC; on-board charger), the user can wirelessly charge the battery without connecting the power source when charging power to the battery. There is. In addition, the advantage of wireless charging can bring about an energy efficiency improvement effect by using the secondary side rectifier circuit and the receiving coil, but the large-capacity long-distance wireless charging method has a limitation on the transmission distance, so many studies are currently being conducted. The purpose of the study is to study the transmitter circuit and receiver circuit of a wireless power transmission device using a primary coil, a secondary coil, and a half bridge series resonance converter, which can transmit power of a non-contact type power transmitter. As a result, a new topology was applied to improve the power transmission distance of the wireless charging system, and through an experiment according to each distance, the maximum efficiency (95.8%) was confirmed at an output of 3 kW at an 8 cm transmission distance.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.91-98
• /
• 2015

There is a new evolution in technological advancement taking place called the Internet of Things (IoT), The IoT enables physical world objects in our surrounding to be connected to the Internet. ISM (Industrial Scientific Medical) band that is 2.4GHz band authorized free of charge is being widely used for smart devices. Accordingly studies have been continuously conducted on the possibility of coexistence among nodes using ISM band. In particular, the interference of IEEE 802.11b based Wi-Fi devices using overlapping channel during communication among IEEE 802.15.4 based wireless sensor nodes suitable for low-power, low-speed communication using ISM band. Because serious network performance deterioration of wireless sensor networks. In this paper, we will propose an algorithm that identifies the possibility of using more accurate channels by mixing utilization of interference signal and RSSI (Received Signal Strength Indicator) Min/Max/Activity of Interference signal by wireless sensor nodes. In addition, it will verify our algorithm by using OPNET Network verification simulator.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.489-492
• /
• 2010

In paper present a group control system for field trip using wireless sensor networks. The teacher in charge of every group carries a hand-held device which is used to manage the lists of children, identify them and detect if any child goes away from the group. Every child uses a sensor node which serves to transmit packet in every 5 seconds and locate in an area of 30 meters around the teacher. The teacher controls the children, detect possible absence children escaping or lost. The proposed system can be used during the excursions, and picnics as well as field trips.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2317-2318
• /
• 2008

This report is about wireless energy transform system. It means something to charge without a line of contact. Existing charging has been many defect, including badness of the line, limitation of the space and the time and so on But this is one of the way that can complement it. So our goal is making the wireless charger that is effective and easy to use.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.601-606
• /
• 2015

Recently wireless data services have widely spread on various multimedia devices such as smart phones and tablets. Existing wired data services have been replaced by wireless data services using mobile devices. Especially domestic mobile devices supporting both Wireless-Fidelity (Wi-Fi) and long term evolution (LTE) services have increased steadily. While Wi-Fi network is provided free of charge, LTE network is offered to pay for. Therefore, mobile devices provide smart network switch to support both preferred Wi-Fi and LTE networks. However, such handover and roaming between Wi-Fi and LTE networks can cause data connection stop in spite of charged data services. This paper has proposed the method to overcome data connection stop for guaranteeing seamless data service during handover and roaming procedures between networks.

• Journal of Internet Computing and Services
• /
• v.6 no.5
• /
• pp.143-154
• /
• 2005

This paper presents a reliable multicast transmission for the advertising-supported Access Point in which a user can use a wireless network access service through receiving the advertisement. In this paper we propose a application-layer multicast protocol that controls a transmission rate of the mobile device for the reliable multicast in wireless LAN environment. Internet advertising includes all means and medias for advertising on the Internet in order to raise sales or popularity of the products or services. Since the current Internet advertising systems are passive, the target systems are exposed to unspecified persons and its exposure rates of the advertisement are changeable and unpredictable. In this paper, we propose an Internet advertising system, with which users can access the wireless Internet without charge, advertisers can provide customized advertisement according to location, time, and categories of users, and owners of network infrastructure can manage the system with a low cost.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.11
• /
• pp.1615-1621
• /
• 2014

A wireless tram which runs without catenary and instead uses batteries installed in the tram has been recently researched actively. This paper presents a new method maximizing absorption of regenerative energy of a wireless tram and extending life cycle of the energy storage device in the wireless tram by applying line-optimized charging and discharging scenario. Energy efficiency and life cycle of energy storage system (ESS) are highly dependent on the characteristic of operating conditions. For example, frequent charge and discharge with high power cause the problems that decrease the battery life cycles. Hybrid energy storage system (HESS) is combination of two ESSs which have complementary characteristics to each other. HESS can provide even better functionality and performance than the battery only ESS due to the synergy effect of two ESSs. This paper also provides a power distribution strategy and driving scenarios which increase the life cycle and energy efficiency of the HESS consisting of a battery and an ultra-capacitor. The developed strategy was tested and verified by a hardware-in-the-loop-simulation (HILS) system which emulates the a wireless tram.