• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.04a
• /
• pp.130-135
• /
• 1993

Twelve 1/2 scale modeled wall specimens were tested statically up to failure to investigate she shear behavior of concrete walls reinforced with welded wire fabric. major variables were spacing of reinforcing bars, type of reinforcing bar(rebar, welded sire fabric, knurling wire) and the existence of tied column type reinforcement

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.04a
• /
• pp.73-80
• /
• 1994

This paper is to study the mechanical behavor and structural safety of the wire-mesh half slab by an analytical method. Layer model was adopted by modelling the wire-mesh half slab as a flexural member composed of free cantilever beam and vertical supports (walls or beams). Reasonable results for the prediction of ultimate strength of the half stab at each loading direction and design recommendations for the reinforcement detail at wall(beam)-slab joints are acquired. On the other hand, ductility capacity of the wire-mesh half slab was overestimated by not considering the brittleness of wire-mesh reinforcements pre-manufactured at the form of Kaiser Truss.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.04a
• /
• pp.136-141
• /
• 1993

8 Wall specimens (1/2 scaled) used welded wire fabric (Ф=6mm) and ordinary deformed reinforcement(D6) of which their ultimate tensile strength were almost same were tested to investigate the inplane-flexural behavior. Test results show that : 1. The wall strength with welded wire fabric was 20% less than that with deformed bar. 2. The wall ductility ratio of welded wire fabric was 1/3 times than that of deformed bar, approximately. 3. It is recommened that lap splice of welded sire fabric should be avoided in critical fracture zone.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.900-904
• /
• 2009

The measurement of contact wire uplift in electric railway is one of the most test method to accept the maximum permitted speed of new vehicles or pantographs. The contact wire uplift can be measured for shot periods when pantograph is running in monitoring station. This paper describes the development of two different methods for contact uplift measurement using vision-based system and wireless online monitoring system. Our vision-based system employs a high-speed CMOS (Complementary Metal Oxide Semiconductor) camera with gigabit ethernet LAN. The development of a real-time remote monitoring system that acquires data from any kind of sensor to be transmitted by wireless communication from overhead line and structure at 25 kV to a computer in catenary system. The proposed two kind of different measurement systems to evaluation for dynamic uplift of overhead contact wire shows promising on-field applications for high speed train such as Korea Tilting Train (TTX) and Korea Train eXpress (KTX).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.10
• /
• pp.864-869
• /
• 2009

The measurement of contact wire uplift in electric railways is one of the most important test parameters to accepting the maximum permitted speed of new electric vehicles and pantographs. The contact wire uplift can be measured over short periods when the pantograph passes monitoring stations. In this paper, a high-speed image measurement system and its image processing method are being developed to evaluate dynamic uplift of overhead contact wires caused by pantograph contact forces of Korea Tilting Train eXpress (TTX) and Korea Train eXpress (KTX). The image measurement system was implemented utilizing a high-speed CMOS (Complementary Metal Oxide Semiconductor) camera and gigabit ethernet LAN. Unlike previous systems, the uplift measurement system using high speed camera is installed on the side of the rail, making maintenance convenient. On-field verification of the uplift measurement system for overhead contact wire using high speed camera was conducted by measuring uplift of the TTX followed by operation speeds at the Honam conventional line and high-speed railway line. The proposed high-speed image measurement system to evaluate dynamic uplift of overhead contact wires shows promising on-field applications for high speed trains such as KTX and TTX.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.4
• /
• pp.764-771
• /
• 2005

As high-speed class broadband communication services have come in earnest broadband communication services are well regularized, utilizing not only wire but also wireless. One of wireless communication systems named B-WLL system, which provides high-speed broadband communication services, gives users inconvenience because it utilizes wire in the service area. In order to overcome this drawback, local wireless construction with ubiquitous environment has been considered in a new service demand area. We bring forth a scheme of cell Planning with 2 GHz frequency for wireless LAN construction which provides connection and mobility with no restrictions in time and locations.

• Journal of Korea Spatial Information System Society
• /
• v.6 no.2 s.12
• /
• pp.77-84
• /
• 2004

The purpose of this study is to suggest an effective guideline for reducing communication costs and improving qualities of Intelligent Transport Systems (ITS) by totally or partially integrating wireless communication networks between equipments of ITS Centers and Roadside in the National ITS Physical Architecture. We analyzed wire and wireless communication networks such as wireless LAN and satellite communications in the National Highway Traffic Management System (NHTMS) for receiving and transmitting transportation data. Also, we analyzed operation and communication costs to find out right communication networks for ITS. The results of this study will be used to build and operate many other ITS systems including Korea Highway Corporation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.8
• /
• pp.98-105
• /
• 2008

FlexRay is a high-speed communications protocol with high flexibility and reliability. It was devised by automotive manufacturers and semiconductor vendors and implemented as on vehicle LAN protocol using x-by-wire systems. FlexRay provides a high speed serial communication, time triggered bus and fault tolerant communication between electronic devices for automotive applications. In this paper, we first design the FlexRay communication controller, bus guardian protocol specification and function parts using SDL (Specification and Description Language). Then, the system is re-designed using Verilog HDL based on the SDL source. The FlexRay system was synthesized using Samsung $0.35{\mu}m$ technology. It is shown that the designed system can operate in the frequency range above 76 MHz. In addition, to show the validity of the designed FlexRay system, the FlexRay system is combined with automobile advance alarm system in vehicle applications. The FlexRay system is implemented using ALTERA Excalibur ARM EPXA4F672C3. It is shown that the implemented system operates successfully.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.4
• /
• pp.753-757
• /
• 2005

Wireless LAN was developed by alternative of LAN and because establishment was easy, have used into special field and special expenditure. Recently, Standard and a technology developed by leaps and bounds. Present is used into purpose of the Building to Building or wide connection etc. and relay of the high speed Internet and usage of picture communication that require multimedia band width. Specially, campus wireless LAM is thought that must secure radius $100\;\~\;200\;m$ dimension at the minimum 10Mbps speed as Internet transit trunk. But, there is difference as degressive here. In this paper, wireless LAN measured for effectiveness proof as Internet transit trunk in actuality utilization environment. Proved that should compose IEEE802.11b as AP more than minimum 3 when compose network to base as measuring result. Hereafter, there is the purpose that achieve performance evaluation of wireless UM in marine environment.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.599-603
• /
• 2006

Korea Information Security Agency has executed the certification system for the information security management since 2002 and examines the conformance of the IDCs'total management system including the technical and the physical protection measure. However, this certification system has the standard only for the IDC in the wire/wireless segregated and the evaluation method for the wire/wireless integrated has not been suggested yet. This paper is on the basis of "Accumulation Information Communication Facility Secure Principle", guidelines of Wireless LAN security operation, the existing principles and recommendations of the information security and the data on IDC environment. And the paper suggests the IDC network model in the wire/wireless integrated and the IDC evaluation method.