• 한국산학기술학회논문지
• /
• 제3권2호
• /
• pp.69-73
• /
• 2002

프레스 금형의 부품제작에 주로 사용되는 와이어 컷 방전가공에서 가공횟수가 펀치와 다이블록의 가공면조도에 미치는 영향을 고찰하였다. 본 연구의 수행을 위해 정밀 가공기술로 활용도가 증가되고 있는 와이어 컷 방전가공기(Sodic A500H)를 사용하여 1차, 2차, 3차 총 3회 가공을 실시하였다. 3회에 걸쳐 가공된 펀치와 다이블록의 가공면 조도 고찰을 위해 표면조도거칠기 측정기 (Federal사의 System5000)를 사용하여 연구를 수행하였다.

• 한국산학기술학회논문지
• /
• 제7권4호
• /
• pp.545-549
• /
• 2006

다양한 종류의 제품을 생산하는 프레스금형의 부품 중에서 펀치와 다이플레이트를 제작하는데 주로 W-EDM을 이용한다. W-EDM전에는 기계가공으로 제작된 펀치와 다이플레이트로 제품을 생산하게 되면 생산량이 200만~230만개를 생산하고 금형수명을 다하였다. 그러나 W-EDM으로 제작된 금형으로 제품을 생산하게 되면 생산수량이 70만~80만개를 생산하고 금형수명이 다하였다. 이것은 W-EDM한 후에 발생되는 가공변질층에 기인하는 것으로 사료되므로 W-EDM전과 W-EDM후의 가공면에 대한 SEM촬영을 실시하여 가공변질층의 발생을 확인하고 이에 대한 제거 방법을 연구하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.956-959
• /
• 2001

In die and mould industry, major material such as cemented carbide is broadly used for increasing the life time and decreasing the cost. It is also required the development for the skills of wire-cut electrical discharge machining(WEDM), but the WEDMed surface was found to be worst due to the attached components of wire. Precision machining method like lapping is necessary for obtaining high quality surface. The lapping compound such as Al2O3 and SiC and cast iron lap can be used for lapping process. The components of Cu and Zn were found WEDMed surface of the specimen. As the result, the low quality of precision was obtained and the heat damage layer of the specimen was occurred. The value of surface hardness was deteriorated, and therefore finish process was required.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.69-69
• /
• 2003

• 한국산업융합학회 논문집
• /
• 제8권1호
• /
• pp.25-29
• /
• 2005

Titanium specially has high specific strength, excellent mechanical properties as fatigue strength and fracture ductility, good corrosion resistance, and therefore are broadly applied to the various fields. It is required the developmennt for the skills of wire-cut electrical discharge machining(WEDM), but the WEDMed surface was found to be worst due to the attached components of wire. Therefore precision maching method like lapping is necessary for getting high quilty surface. Roughness of lapped surface, surface hardness to each process depth and improved method of surface shape were stuided experimentally, by changing of grain size of diamond lap material and lapping pressure with constant speed in lapping process.

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.322-328
• /
• 2002

In wire-electrical discharge machining (W-EDM), the dielectric plays an important role as the working fluid. It affects the material removal rate and the properties of the machined surface. This paper deals with the effects of the electrical conductivity of dielectric and cobalt percentage of sintered carbides on the machining characteristics and the machined surface integrities with deionized water as dielectric. A series of experiments have been performed on sintered carbides having different cobalt contents. Experimental results show that a higher cobalt content of WC decreases the metal removal rate and worsens the surface quality. Lower electrical conductivity of the dielectric results in a higher metal removal rate as the gap between wire electrode and workpiece reduced. Especially, the surface integrities of rough-cut workpiece, wire electrode, and debris were analyzed also through scanning electron microscopy(SEM) and surface roughness tester. By energy dispersive spectrometry(EDS), it is confirmed that micro cracks and some of electrode material are found on the workpiece surface.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.215-216
• /
• 2002

This paper describes the wear characteristics of WC-Co cemented carbides machined with Wire-cut or Die-sinking EOM. We prepared the specimens with different grades of grinding to remove the affected layer after the EDM. These specimens were experimented by block-on-cylinder type tribometer. The result indicated that although the hardness of the affected layer was lower than that of the bulk, wear resistance was increased. In order to investigate the cause of the increase in wear resistance of the affected layer, the layer was observed and analyzed by SEM and ESCA. We also discussed the mean free path of Co phase.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2002년도 춘계학술발표논문집
• /
• pp.59-64
• /
• 2002

프레스 금형의 부품제작에 주로 사용되는 와이어 컷 방전가공에서 가공횟수가 펀치와 다이 블록의 가공면조도에 미치는 영향을 고찰하고자 수행하였다. 본 연구의 수행을 위해 정 밀 가공 기술로 활용도가 증가되고 있는 와이어 컷 방전가공기(Sodic A500H)를 사용하여 1차, 2차, 3차 총 3회 가공을 실시하였다. 3회에 걸쳐 가공된 펀치와 다이블록의 가공면조도 고찰을 위해 표면조도거칠기 측정기(Federal 사의 System5000)를 사용하여 연구를 수행하였다.

• 한국기계가공학회지
• /
• 제3권3호
• /
• pp.17-23
• /
• 2004

The performance and life of a die are influenced by the machining methods. In order to examine the effects of machining methods on surface charactenstics, simple experiments are devised and performed. A die steel STD11, commonly used as a die material in press working, is selected. Three ways of machining methods to manufacture a die are considered. Those are (1) milling and then grinding, (2) wire-cut electric discharge dachining (W-EDM) and (3) heat treatment after W-EDM. The resulting surface roughnesses are measured. Also, the changes of surface microstructures are investigated using the scanning electron microscope(SEM) with energy dispersive X-ray spectrometer(EDS) and the results are discussed in details.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.739-742
• /
• 2000

From the experimental study of W-EDM for alloyed steel, the characteristics such as Hand Drum Form and surface roughness have been observed and evaluated for various conditions. In square hole, the increase of If as to made condition the calculate high value of surface roughness. Also compare dimensionless square hole with circle hole' graph. In circle hole, if a value of surface roughness IP 6 in a side of circle it show a 0.4${\mu}{\textrm}{m}$ and in IP 8, 0.6${\mu}{\textrm}{m}$, in IP 10, 0.7${\mu}{\textrm}{m}$, in IP 12. 0.8${\mu}{\textrm}{m}$ higher than before. This figure show the surface roughness is higher than before, because a table move in either X-axis or Y-axis in square hole, on the contrary, in circle there table move in X-axis and Y-axis at the same time. hand drum form getting small when wire tension increase 1000gf to 1500gf, at the same working conditions. the smaller of off time, the mailer of hand drum form in same condition and same wire tension. but if you compare square hole with circle hole' graph hand drum form displayed in maintained term of working condision, on the contrary, in case of square hole variation of hand drum form is more increase than a grow of IP