• 한국음향학회지
• /
• 제27권6호
• /
• pp.279-285
• /
• 2008

본 논문은 수중 무인잠수체 (UUV) 통제를 위한 다중접속 프로토콜의 효율 평가에 관한 연구이다. 수중에서 무인잠수체는 현재 유선에 의한 통제가 대부분이나, 유선 통제시 운용성에 크게 제한을 받기 때문에 무선에 의한 통제가 요구고 있다. 본 연구에서는 해수면에 위치한 모선, 통신부이 또는 해저 면에 위치한 통신노드에 의한 무선통제를 목적으로 정형화된 다중접속 프로토콜 (순수 알로하 (Pure ALOHA), 슬롯화된 알로하 (Slotted ALOHA), 비영속적 CSMA (Nonpersistent CSM), 슬롯화된 비영속적 ISMA (Slotted Nonpersistent ISMA))의 효율을 모의 평가하였다. 평가결과 비영속적 CSMA, 슬롯화된 비영속적 ISMA가 비교적 수중에서 높은 효율을 갖는 것으로 확인되었다.

• 설비공학논문집
• /
• 제18권9호
• /
• pp.745-752
• /
• 2006

DOS and NaCl aerosol particles were used to determine collection efficiencies of a 2-stage electrostatic wet scrubber with respect to particle size. The DOS and NaCl aerosols have geometric mean diameters of 0.1-3.0 urn, geometric standard deviations of $1.1{\sim}1.8$ and total number concentrations of $450{\sim}2,400\;particles/cm^3$. The tested operating variables for the electrostatic wet scrubber included air velocity and water injection rate. It was shown from the experimental results that particle collection efficiencies increased in the submicron particle size range when different polarities were applied on the water nozzle and corona wire, respectively. This increase in the collection efficiency is attributed to strong electrostatic attraction between the negative water droplets and positive submicron particles. The collection efficiencies also increased when water injection rate was increased or air velocity was decreased. Meanwhile, the pressure drop across the wet scrubber decreased by 90% compared with the existing mechanical wet scrubber. Finally, ammonia gas was used to determine gas removal efficiencies. It was observed that the gas removal efficiencies increased when the air velocity was decreased or the water injection rate was increased.

• 펄프종이기술
• /
• 제36권3호
• /
• pp.52-59
• /
• 2004

The greater Increase of the demand for environmental friendly materials especially for packaging industry leads to the larger interest in the reusable and recycable materials such as pulp mold. Although the pulp mold has great characteristics for packaging, some deficiency compared with other packaging material like EPS(Expandable Polystyrene) need to be overcome, for example, the relative higher cost. In this report, since the water drainage rate at the forming zone of a wet pulp mold process could have a great influence on the economical efficiency not only by increasing machine speed but also reducing the drying energy, the optimum ways for increasing drainage were investigated The mechanism of vacuum drainage In pulp mold forming was successfully evaluated by using RDA(Retention and Darinage Analyzer). Since the conditions of stock were greatly affected by the pulping time of low consistency pulper, the optimum pupling time was investigated with considerations of all stock preparation processes. The change of stock temperature and the addition of polyelectrolyte could improve the vacuum drainage rate. It was founded that the wire mesh types of mold former had a little influence on the retention because of the relatively mild vacuum drainage. However, the bigger size of dewatering hole showed better drainage rate and could reduce the plugging and con lamination of mold.

• 환경위생공학
• /
• 제10권2호
• /
• pp.79-88
• /
• 1995

The electrostatic precipitation of Auto- Bias has the advantages of a little of power consumption by the voltage to apply only at ionizer and the prevention of fire danger by current flow over. As this ionizer wire was used WXN- Pt material of diameter 90$\mu $m, that improved ion efficiency and safety, simplified a existing source of electric power by induced Auto- Bias voltage. Also, the new type collector used electric conductivity- film wag superior a electric safety and dust collection efficiency and was possible to wash it by water. As a experiment result of this Auto- Bias electrostatic collector, the induced Auto- Bias voltage by appling D.C 4.0∼6.0kV at ionizer was 1.3∼2.3kV and then the power consumption by applied voltage was 8- l8W. The pressure loss of collector by the amount of flowing was 6.1 OmmH$_{2}$O in 300m$^{3}$/hr and showed a safe state of the dust collection. The collection efficiency by particle size was 65.1-95.8% in 0.5∼5.0$\mu $m. After corona discharge of ionizer, the remains ozone concentration was found much lower than that of ACGIH or air pollution criteria in Korea.

• 대한조선학회논문집
• /
• 제28권2호
• /
• pp.318-328
• /
• 1991

본고는 진동수주(Oscillating Water Column:OWC)와 에어터어빈으로 구성된 고정식 파력발전장치의 특성파악을 위한 실험적 연구를 다루고 있다. 실험의 단순화를 위하여 에어터어빈은 이에 등가한 압력강하를 주는 와이어메쉬 스크린으로 대치하여 챔버내 공기유동 및 파랑운동간의 상호작용을 시뮬레이션하였다. 실험은 예인수조에 설치된 조파기를 이용하여 주파수 범위 0.22-0.75Hz인 규칙파 중에서 실시되었다. 실험결과는 홍도천 등 [4]의 2차원 포텐시얼 수치해석결과와 비교되었으며, 상호 잘 일치된 결과를 줌을 확인할수 있었다. 와이어메쉬 스크린을 사용한 공기터어빈의 시뮬레이션 결과로부터 OWC챔버에 미치는 스크린의 영향은 본 연구에서 설정한 실험범위 내에서는 무시할 만한 것으로 나타났다. 정성적으로 볼때 본 형상을 갖는 약 6m정도의 시제품을 제작한다면 주파수 0.3Hz 이내의 해양파중에서 실제 사용이 가능할 것으로 여겨진다.

• 펄프종이기술
• /
• 제40권2호
• /
• pp.8-15
• /
• 2008

Wastewoods (logging residues) generated in Korea were used to make lignocellulosic fillers for papermaking. Lignocellulosic fillers could play great roles to increase retention efficiency and thus decrease turbidity of white water in papermaking process. In addition, lignocellulosic fillers could be used to improve physical properties of paper through their high affinity to cellulosic fibers, leading to the less use of chemical additives like retention aids. Wastewoods including Pinus densiflora and Quercus variabilis were chemically and mechanically treated for making fine particles passing through 100 mesh wire. The newly generated fillers showed larger particle size distribution than ground calcium carbonates but similar distribution to talc. In particular, pretreatment by hot water was more effective to generate smaller particle size than by alkali treatment. Lignocellulosic particles mixed with ground calcium carbonates under intense hybridizing condition greatly contributed to surface coverage of organic fillers in addition to filling to lumen and pits.

• 지질공학
• /
• 제30권3호
• /
• pp.279-288
• /
• 2020

샌드댐이란 하천의 횡단에 보 등을 설치하고 확보된 공간에 모래와 같은 투수성 재료와 물을 함께 채운 후, 공극내의 물을 저장하여 사용하기 위한 구조물이다. 주로 아프리카 케냐를 중심으로 많은 사례가 보고되고 있는 샌드댐에 관해 본 연구에서는 샌드댐의 구조적 안전과 취수량 증대를 위한 설계 방안을 제시하였다. 첫째, 샌드댐의 콘크리트 벽체의 안정성을 확보하기 위해 철근을 가시철근으로 연결, 시공의 편리함을 제시했다. 둘째, 지오텍스타일을 이용하여 증발을 45%에서 8%로 감소시킬 수 있었고 수평방향 투수배출량도 크게 줄일 수 있어 취수량은 기존대비 약 2.4배 증가되는 것을 알 수 있었다. 이 밖에도 수질개선을 위한 침사지 설계로 여과효율을 높였고, 토양수분장력계를 통한 모니터링 방법도 제시하였다.

• 한국전자통신학회논문지
• /
• 제6권3호
• /
• pp.381-387
• /
• 2011

광범위한 지역의 센서들로부터 데이터를 획득, 제어, 감시 등을 수행하는 계측제어기는 중앙 제어실과 유기적 관계를 유지한다. 그러므로 계측제어기는 유선망보다 무선망이 효율적이다. 그러나 무선망을 이용하게 되면 외부로부터 안전성에 커다란 문제가 발생된다. 그러므로 본 논문은 계측제어기의 네트워크 효율성을 증대시키기 위하여 계측제어 무선망에 적합한 MS-WP 암호시스템을 제안하였다. 제안된 MS-WP 암호시스템을 칩 레벨로 구현하여 모의실험을 수행한 결과, AES 알고리즘에 비하여 130% 처리율 증가 및 시스템 효율이 2배 증가됨을 확인하였다. 제안된 MS-WP 암호시스템은 보안성을 증대시키며 저전력화가 가능하고 처리속도가 빨라 계측제어기에 적합할 것이라 사료된다.

• 수산해양교육연구
• /
• 제27권1호
• /
• pp.308-318
• /
• 2015

In order to improve the competitiveness of Korean large purse seine fishery, the purpose of this study is to find out the problems and present the improvement of the production structure of Korean large purse seine fishery by comparing to the production structure of Norwegian purse seine fishery. Norwegian purse seine fishery has been operating labor and energy-saving systems through a single wire operation and avoiding fishing competition through the introduction of IVQ system with different types of fishing vessel and obtaining benefits from Leading fishery management integrated with fish pumps and cooling water systems. In contrast, our country has a large purse seine fishery issues such as high cost and low efficiency of production structures, the volatility of mackerel resources, the lack of leading fishery management after catching fishes, the reduction of fishing ground in accordance with the North East Asia EEZ system. To solve these problems, initiatives to improve the structure of our large purse seine fishery are as follows: First, Implementing the promotion of the effective immature fishes management and establishing Korea-China-Japan resource management system. Second, the promotion of reduction of fleet size, the review of possible single fishing operation, leading out to strengthen its competitiveness by switching to energy-efficient production systems through enhanced efforts at fisheries catches steps. Third, it is necessary to realize corporate through the diversification of business areas and the large-scale commercialization of production structure.

• 동력기계공학회지
• /
• 제21권3호
• /
• pp.93-101
• /
• 2017

In conventional adsorption chamber, adsorbent is embedded in between heat exchanger fins by wire mesh. This method impedes heat and mass transfer efficiency. So in this study, to improve the heat transfer performance of heat exchanger, a fin-tube exchanger was coated with FAPO (Ferroaluminophosphate) zeolite adsorbent. The fin-tube heat exchanger has a fin pitch of 1.8 mm with a variation of adsorbent coating thickness of about 0.1 mm, 0.15 mm and 0.2 mm. By varying cooling water temperature and chilled water temperature respecively, heat transfer rate and overall heat transfer coefficient were investigated. As a result, the heat transfer rate and overall heat transfer coefficient increase with decreasing cooling water temperature and increasing chilled water temperature. Under the basic conditions, the heat transfer rate of heat exchanger with 0.2 mm coating thickness is 11% and 43% higher than that of 0.1 mm and 0.15 mm, respectively. The overall heat transfer coefficient is $189.1W/m^2{\cdot}^{\circ}C$, it is two times lager than that of 0.1 mm.