• 대한기계학회논문집A
• /
• 제34권4호
• /
• pp.501-509
• /
• 2010

해상크레인은 크레인을 탑재한 선박으로서, 조선소에서 대형 블록이나 구조물의 탑재 및 해상 운송 작업에 사용된다. 본 논문에서는 해상크레인과 중량물의 전후 동요(Surge), 상하 동요(Heave), 종 동요(Pitch)에 대한 정적/동적거동을 분석하였다. 이 때, 유연 다물체계 동역학을 적용하여 해상크레인의 붐(boom)을 탄성으로 고려하였으며, 플로팅 프레임(floating frame)과 노드 좌표(nodal coordinates)를 사용하였다. 질량 행렬, 탄성 강성 행렬, 2 차 속도 벡터, 일반화 좌표 방향으로 작용하는 외력 등을 고려하여 모든 운동이 연성된 비선형 운동 방정식을 구성하였다. 외력으로는 비선형 유체정역학 힘, 선형화된 유체동역학 힘, wire rope 힘, 계류력이 고려되었다. 수치 해석을 위해 Hilber-Hughes-Taylor 방법을 비선형 운동방정식에 적용하였다. 정적 거동 분석을 통한 정적 평형 자세를 고려한 경우와 고려하지 않은 경우에 대해 결과를 비교하였으며, 수치 해석 방법에 대한 정적/동적 거동 분석 결과를 비교하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권1호
• /
• pp.56-63
• /
• 2018

이 연구에서는 연성중심의 보강을 위하여 벽체의 양단부에서 경계요소를 형성하는 내진 보강공법이 적용된 벽체의 반복 휨 거동을 평가하였다. 벽체 경계요소에서 구속효과를 위한 횡보강은 프리스트레스트 와이어로프를 사용하였다. 주요 변수는 제시된 단면 확대공법의 보강 높이로 하였다. 최소 보강 높이는 보강 벽체와 기존 벽체의 모멘트 분포의 비교로부터 결정하였다. 실험결과, 제시된 보강방법은 벽체의 휨 강성 및 연성향상에 매우 효율적이었는데, 최대내력 시 강성과 최대내력의 80%지점에서 산정한 일손상지수는 무보강 벽체에 비해 각각 평균 46%와 210% 증가하였다. 보강높이가 벽체의 일손상지수 증가에 미치는 영향은 보강높이가 $2.0l_w$ 이상일 때 중요하지 않았다. 보강된 벽체의 휨 내력은 ACI 318-14에서 제안하는 등가응력블록을 통한 예측 값보다 22% 이상 높았다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.552-567
• /
• 2017

The floating crane vessel in waves gives rise to the motion of the lifted object which is connected to the hoisting wire. The dynamic tension induced by the lifted object also affects the motion responses of the floating crane vessel in return. In this study, coupled motion responses of a floating crane vessel and a lifted subsea manifold during deep-water installation operations were investigated by both experiments and numerical calculations. A series of model tests for the deep-water lifting operation were performed at Ocean Engineering Basin of KRISO. For the model test, the vessel with a crane control system and a typical subsea manifold were examined. To validate the experimental results, a frequency-domain motion analysis method is applied. The coupled motion equations of the crane vessel and the lifted object are solved in the frequency domain with an additional linear stiffness matrix due to the hoisting wire. The hydrodynamic coefficients of the lifted object, which is a significant factor to affect the coupled dynamics, are estimated based on the perforation value of the structure and the CFD results. The discussions were made on three main points. First, the motion characteristics of the lifted object as well as the crane vessel were studied by comparing the calculation results. Second, the dynamic tension of the hoisting wire were evaluated under the various wave conditions. Final discussion was made on the effect of passive heave compensator on the motion and tension responses.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권1호
• /
• pp.133-140
• /
• 2010

와이어로프와 T형 강판을 이용한 비부착공법의 내진성능을 평가하기 위해 중심 축하중과 반복 횡하중을 받는 5개의 보강된 기둥과 무보강 기둥을 실험하였다. 주요 변수는 T형 강판의 정착방법과 피복 모르터의 유 무이다. 실험결과 T형 강판이 정착된 기둥의 하중분배로 인한 휨 내력 및 연성 증가를 확인할 수 있었다. 그러나 T형 강판이 정착되지 않은 기둥은 연성 증가에는 효과적이지만 T형 강판으로 하중이 분배되지 않았다. 피복 모르터가 있는 보강된 기둥은 효과적인 초기 강성 및 휨 내력 증가를 보였지만 연성증가에는 불리하였다. 단면분할법을 이용해 예측한 보강된 기둥의 최대 휨 내력은 등가응력블럭을 사용하여 예측한 ACI 318-05 기준보다 실험결과를 예측하였다.

• Journal of Mechanical Science and Technology
• /
• 제17권6호
• /
• pp.860-869
• /
• 2003

Dynamic characteristics of a catenary that supplies electrical power to high-speed railway is investigated. The catenary is a slender structure composed of repeating spans. Each span is in turn composed of the contact and messenger wires connected by the hangers in regular intervals. A finite element based dynamic model is developed, and numerical simulations are performed to determine the dynamic characteristics of the catenary The influence of the structural parameters on the response characteristics is investigated. The structural parameters considered include tension on the contact and messenger wires, stiffness of the hangers, and the hanger and span spacing. The hanger characteristics are found to be the dominant factors that influence the overall dynamic characteristics of the catenary.

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.137-145
• /
• 2002

Electric vehicle body has to be subjected to uniform load and requires auxiliary equipment such as air pipe and electric wire pipe. Especially, the cross beam supports the weight of passenger and electrical equipments. a lightweight vehicle body is salutary to save operating costs and fuel consumption. Therefore this study is to perform the size and the shape optimization of crossbeam for electric vehicle using the method of topology optimization to introduce the concept of homogenization based on optimality criteria method which is efficient for the problem having the number of design variables and a few boundary condition. this provides the method to determine the optimum position and shape of circular hole in the cross beam and then can achieve the optimal design to reduce weight.

• 펄프종이기술
• /
• 제42권4호
• /
• pp.33-38
• /
• 2010

The effects of fillers on the wet end dewatering and paper properties were investigated in order to confirm the possibility that the fillers can be used as a means for saving energy in papermaking process. The performance of GCC, PCC and talcs were evaluated. The dewatering in wire and wet press was improved by the increase of filler addition, but it was observed that the dewatering behavior was depended by the filler characteristics. PCC was superior to other fillers in the bulk, opacity, air permeability and stiffness while the lowest tensile and burst index were obtained. We found that the response on the wet end dewatering and paper properties were affected greatly by the filler characteristics including particle shape and size.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.745-750
• /
• 2000

The rigidity of pier is important in the analysis of rail on high speed railway bridges. This study is being performed because of followings. 1) Actual longitudinal stiffness of the structure including substructure should be considered in the calculation of longitudinal stresses in rails. 2) There are many uncertainties in piers and foundations for design. 3) Actual guideline for the design of piers is necessary. 4) Measurement on the rigidity of pier according to the types of pier, foundation and soil-condition is needed. Curve for rigidity will be obtained through this study and applied for actual design as the guideline. Stresses in rails can be estimates accurately. A pair of piers, which consists of pot-bearing for fixed support and pad-bearing for movable support, is loaded by steel frame through steel wire ropes. The responses which are intended to measure in the field test are displacements, forces and tilts on the top of piers.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.293-300
• /
• 2004

A new earth retention system(Innovative Prestressed Wale System) has been developed and introduced. IPR earth retention system provides an economical benefit, construction easiness, good performance and safety. IPS is a prestressed wale by using a steel wire, which provides a high stiffness to resist the earth pressure. In order to investigate the applicability and the safety of new IPS system, field tests were performed. A new IPS system applied in a trench excavation performed successfully. Basic principles and mechanism of IPS system and measure performance were presented and discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.1072-1075
• /
• 1997

To enhance the effective data transfer rate the multi-beam optical disk drive is presented. The Beam rotating actuator is necessary for putting multi-beam on more than one track. Ray tracing was also executed for real system set-up. The Beam Rotating Actuator is made up of piezoelectric material, high stiffness wire hinge and dove prism. The actuator has about 1kHz natural frequency and suitable and suitable operational range. The dynamic equation for the actuator is derived for the control of real system.