• 소성∙가공
• /
• 제26권3호
• /
• pp.162-167
• /
• 2017

The tensile surface residual stress in the multi-pass drawn wire deteriorates the mechanical properties of the wire. Therefore, the evaluation of the residual stress is very important. Especially, the axial residual stress on the wire surface is the highest. Therefore, the objective of this study was to propose an axial surface residual stress prediction model of the multi-pass drawn steel wire. In order to achieve this objective, an elastoplastic finite element (FE) analysis was carried out to investigate the effect of semi-die angle and reduction ratio of the axial surface residual stress. By using the results of the FE analysis, a surface residual stress prediction model was proposed. In order to verify the effectiveness of the prediction model, the predicted residual stress was compared to that of a wire drawing experiment.

• 소성∙가공
• /
• 제32권6호
• /
• pp.303-310
• /
• 2023

Electrohydraulic forming(EHF), one of the high-speed forming method, can supplement the weak point of previous forming process such as deep-drawing and electromagnetic forming. Indeed, EHF is time-consuming process during installing wire before experiment that hard to apply to industry. In this research, applying wireless electrode, the formability of SUS430 sheet was compared through EHF experiments using wire-installed electrode and the other, wireless. Although the power was a little lacking, the advantages of the experiment using wireless electrode could be confirmed with checking the optimal location of electrodes where the plasma is generated and comparing free-bulging height depending on former and later condition of electrodes with performing several single and multistage experiments for same voltage, 6 kV.

• 접착 및 계면
• /
• 제18권1호
• /
• pp.1-7
• /
• 2017

본 연구는 연필을 이용하여 연필 선 종이센서(pencil drawing paper sensor, PDPS)를 제작하였을 경우 센서로 활용하기 위한 기초연구를 실시하였다. PDPS를 제작하기 위한 기초 연구로 4B 조건이 최적이며, 연필 선의 길이는 20 mm 폭은 3 mm 조건이 적절하였다. 또한 종이는 A4조건이 최적이었으며, 접점의 안정화를 위해 스카치 테이프와 실버페이스트가 반드시 사용해야 데이터의 노이즈가 감소하였다. PDPS를 이용할 경우 온도에 대한 감지가 가능하였으며, 경험식으로 PDPS의 전기저항 변화도 결과와 온도 결과가 반비례 관계임을 확인하였다. 온도에 대한 PDPS 경험식을 바탕으로 복합재료의 성형단계에서의 확인한 PDPS의 전기저항 변화를 관찰하여 복합재료의 물성과의 상관관계를 확인하였다. 비교적 PDPS를 이용하여 복합재료의 기계적 및 계면 물성을 예측해 볼 수 있었다.