• International Journal of Aeronautical and Space Sciences
• /
• 제4권1호
• /
• pp.63-74
• /
• 2003

The vortical flow of a 65-deg flat plate delta wing with a leading edge extension(LEX) was examined through off-surface visualization, 5-hole probe and hot-film measurements. The off-surface flow visualization technique used micro water droplets generated by a home-style ultrasonic humidifier and a laser beam sheet. The angles of attack ranged from 10 to 30 degrees, and the sideslip angles ranged from 0 to -15 degrees. The Reynolds number was $1.82{\times}10^5$ for the flow visualization, and $1.76{\times}10^6$ for the 5-hole probe and hot-film measurements. The comparison of the visualization photos and the flow field measurement showed that the two results were in a good agreement for the relative position and the structure of the wing and LEX vortices, even though the flow Reynolds numbers of the two results were much different. The wing vortex and the LEX vortex coil each other while maintaining a comparable strength and identity at zero sideslip. Neither a looping of the wing vortex around the strake vortex, nor the lopsided coiling of the stronger strake and the weaker wing vortices was observed. At non-zero sideslip, the downward movement of the LEX vortex when going downstream was enhanced on the windward side, and the downward and inboard movement of the LEX vortex when going downstream was suppressed on the leeward side. The counterclockwise coiling of the wing and LEX vortices was decreased significantly on the leeward side.

• 대기
• /
• 제26권1호
• /
• pp.85-95
• /
• 2016

In this study, we investigated the variabilities of wind speed of 850 hPa and precipitable water over the East Asia region using the NCEP Final Analysis data from December 2001 to November 2011. A large variance of wind speed was observed in northern and eastern China during the winter period. During summer, the regions of the East China Sea, the South Sea of Japan and the East Sea show large variances in the wind speed caused by an extended North Pacific High and typhoon activities. The large variances in the wind speed in the regions are shown to be correlated with the inter-annual variability of precipitable water over the inland region of windward side of the Korean Peninsula. Based on the investigation, sensitivity tests to the domain size were performed using the WRF model version 3.6 for heavy precipitation events over the Korean Peninsula for 26 and 27 July 2011. Numerical experiments of different domain sizes were set up with 5 km horizontal and 50 levels vertical resolutions for the control and the first experimental run, and 9 km horizontal for the second experimental run. We found that the major rainfalls correspond to shortwave troughs with baroclinic structure over Northeast China and extended North Pacific High. The correlation analysis between the observation and experiments for 1-h precipitation indicated that the second experiment with the largest domain had the best performance with the correlation coefficient of 0.79 due to the synoptic-scale systems such as short-wave troughs and North Pacific High.

• Spatial Information Research
• /
• 제19권1호
• /
• pp.13-19
• /
• 2011

도시화가 진행됨에 띠라 고층아파트와 고층빌딩 등 지형지물의 변화가 많이 일어나고 있다. 지형지물의 변화는 강풍 발생의 원인으로 작용하며, 풍속은 풍상측 지형지물의 영향으로 같은 속도의 바람이 붙어올지라도 그 값이 증가 또는 감소한다. 설계기준에서는 이러한 변화를 풍속고도분포계수로 정의하고, 지표면조도에 따라 그 값을 산정하여 반영하도록 하고 있지만 현실에서는 설계자의 주관적 판단에 따라 지표면조도를 결정하야 풍속고도분포계수를 산정하고 있으며, 건설지점의 지표면조도를 구분하기 위한 연구와 자료 또한 부족한 실정이다. 본 논문에서든 최근 고층주거건물이 많이 건설된 지역을 대상으로 건축물의 수직높이에 따분 지표면조도를 GIS프로그램을 이용하여 정량적으로 구분함으로써 풍속 고도분포계수를 보다 합리적으로 산정하고자 한다. 풍하중을 고려한 구조물 설계 시 본 연구에서 제안한 풍속고도분포계수 산정방법을 이용함으로써 설계의 합리성과 구조물의 안전성을 더 높일 수 있을 것이다.

• 한국유체기계학회 논문집
• /
• 제14권3호
• /
• pp.50-58
• /
• 2011

To utilize wind resources effectively around buildings in urban area, the magnitudes of wind velocity and turbulence intensity are important, which means the need of the information about the relationship between the magnitude of wind velocity and that of fluctuating wind velocity. In the paper, wind-tunnel experiments were performed to provide the information about Characteristic of Wind flow around buildings with the spanwise distance and the side ratio of buildings as variables. For a single building with the side ratios of one and two, the average velocity ratio was 1.4 and the velocity standard deviation ratio ranged from 1.4 to 2.6 at the height of 0.02m at the corner of the windward side, in which flow separation occurred. For twin buildings with the side ratios of one and two, the velocity ratio ranged from 2 to 2.5 as the spanwise distance varied at the height of 0.02m, and the velocity standard deviation ratio varied near 1.25. For twin buildings with the side ratios of one and two, the maximum velocity ratio was 1.75 at the height of 0.6m, and the maximum velocity standard deviation ratio was 2.1. It was also found from the results of CFD analysis and wind-tunnel experiments that for twin buildings with the side ratios of one and two, the difference between the velocity ratio of CFD analysis and that of wind-tunnel experiments at streamwise distances was near 0.75.

• 대기
• /
• 제31권4호
• /
• pp.395-404
• /
• 2021

In order to investigate downslope windstorm by using more detailed observation, we observed 6 cases at 3 sites - Inje, Yongpyeong, and Bukgangneung - during "3-D Meteorological Observation Project in Yeongdong region of Gangwon province, South Korea in 2020." The results from analysis of the project data were as follows. First, AWS data showed that a subsidence inversion layer appeared in 800~700 hPa on the windward side and 900~850 hPa on the leeward side. Second, before strong wind occurred, the inversion layer had descended to about 880~800 hPa. Third, with mountain wave breaking, downslope wind was intensified at the height of 2~3 km above sea level. After the downslope wind began to descend, the subsidence inversion layer developed. When the subsidence inversion layer got close to the ground, wind peak occurred. In general, UM (Unified Model) GDAPS (Global Data Assimilation Prediction System) have had negative bias in wind speed around peak area of Taebaek mountain range, and positive bias in that of East Sea coast area. The stronger wind blew, the larger the gap between observed and predicted wind speed by GDAPS became. GDAPS predicted strong p-velocity at 0600 LST 25 Apr 2020 (4^th case) and weak p-velocity at 2100 LST 01 Jun 2020 (6^th case) on the lee-side of Taebaek mountain range near Yangyang. As hydraulic jump theory was proved, which is known as a mechanism of downslope windstorm in Yeongdong region, it was confirmed that there is a relationship between p-velocity of lee-side and wind speed of eastern slope of Taebaek mountain range.

• 한국융합학회논문지
• /
• 제12권9호
• /
• pp.153-159
• /
• 2021

건축물의 환기성능 평가를 위한 모델링 과정에서 핵심 경계조건으로 활용되는 풍압계수는 통상 저층형 단일 건물에 대해서만 자료화되어 있어, 공동주택 단지와 같은 고층형 집합주택의 모델링 시에는 적용할 수 없다. 이에 본 연구에서는 CFD(Computational Fluid Dynamics)해석을 통해 건물의 배치 및 종횡비가 다른 판상형 공동주택에 대하여 풍향각에 따른 풍압계수의 특성을 분석하고 유형화함으로써 환기 모델링 시 참고할 수 있는 기초자료를 제시하였다. 풍향각 0도의 경우 가장 풍상측에 위치한 건물의 정면에서는 좌우가 반전된 S자 형태의 풍압계수 분포가 나타났으며, 최하층, 최상층 및 2개의 변곡점에 해당하는 풍압계수는 건물의 높이와 관계없이 비교적 근사한 값을 보였다. 저층부의 변곡점은 약 11m 높이에 형성되었으며, 고층부 변곡점의 높이는 건물의 높이에 비례하는 추세식을 통해 산출가능함을 확인하였다. 또한 풍향각 45도 조건을 제외하면 대부분의 조건에서 풍압계수의 평균값을 적용 가능함을 확인하였다.

• 대기
• /
• 제28권4호
• /
• pp.443-455
• /
• 2018

Nowcasting algorithms using weather radar data are mostly based on extrapolating the radar echoes. We estimate the echo motion vectors that are used to extrapolate the echo properly. Therefore, understanding the general characteristics of these motion vectors is important to improve the performance of nowcasting. General characteristics of radar-based motions are analyzed for warm season precipitation over Jeju region. Three-year summer season data (June~August, 2011~2013) from two radars (GSN, SSP) in Jeju are used to obtain echo motion vectors that are retrieved by Variational Echo Tracking (VET) method which is widely used in nowcasting. The highest frequency occurs in precipitation motion toward east-northeast with the speed of $15{\sim}16m\;s^{-1}$ during the warm season. Precipitation system moves faster and eastward in June-July while it moves slower and northeastward in August. The maximum frequency of speed appears in $10{\sim}20m\;s^{-1}$ and $5{\sim}10m\;s^{-1}$ in June~July and August respectively while average speed is about $14{\sim}15m\;s^{-1}$ in June~July and $8m\;s^{-1}$ in August. In addition, the direction of precipitation motion is highly variable in time in August. The speed of motion in Lee side of the island is smaller than that of the windward side.

• Journal of Forest and Environmental Science
• /
• 제35권2호
• /
• pp.78-89
• /
• 2019

Coastal plantation is one of the key natural defence against the tidal surge induced tropical cyclones. In Bangladesh, a total of 81 km long coastal belt was established from Potenga to Muhuri in Chittagong. This study explores the wind protection efficiency of the coastal plantations at 28 observation points along the 81 km long Potenga-Muhuri irrigation project of Chittagong coastal belt. We found that wind protection efficiency was lowest (1.40% and 7.00%) at $1^{st}$ observation point of outside the embankment (OE) and inside of the embankment (IE) than Sea Shore (SS), respectively. On the other hand, the highest (82.89% and 95.72%) wind protection efficiency was observed at $22^{th}$ observation for Outside of the Embankment (OE) and Inside of the Embankment (IE) than Sea Shore (SS), respectively. This study also highlighted on species specific wind protection efficiency. The result revealed that 6-year old Casuarina, 6-year old mixed plantation and 10-year old Sonneretia apetala with the width of 20.12 m, 30.48 m, and 15.24 m can reduce wind speed up to 30 H, 30 H and 25 H at windward side, respectively. Analysis also showed that percentage of wind reduction was significantly higher at plantation coast than barren, and ship breaking yard coast. The findings of this study have great potentiality to contribute substantially to take more coastal embankment afforestation programs by the Government of Bangladesh and to choose the more wind resistant plant species throughout the coastal areas of the country.

• Wind and Structures
• /
• 제32권3호
• /
• pp.227-238
• /
• 2021

This study analyzed the pressure patterns and local pressure of tall buildings with corner modifications (recessed and chamfered corner) using wind tunnel tests and proper orthogonal decomposition (POD). POD can distinguish pressure patterns by POD mode and more dominant pressure patterns can be found according to the order of POD modes. Results show that both recessed and chamfered corners effectively reduced wind-induced responses. Additionally, unique effects were observed depending on the ratio of corner modification. Tall building models with recessed corners showed fluctuations in the approaching wind flow in the first POD mode and vortex shedding effects in the second POD mode. With large corner modification, energy distribution became small in the first POD mode, which shows that the effect of the first POD mode reduced. Among building models with chamfered corners, vortex shedding effects appeared in the first POD mode, except for the model with the highest ratio of corner modifications. The POD confirmed that both recessed and chamfered corners play a role in reducing vortex shedding effects, and the normalized power spectral density peak value of modes showing vortex shedding was smaller than that of the building model with a square section. Vortex shedding effects were observed on the front corner surfaces resulting from corner modification, as with the side surface. For buildings with recessed corners, the local pressure on corner surfaces was larger than that of side surfaces. Moreover, the average wind pressure was effectively reduced to 88.42% and 92.40% in RE1 on the windward surface and CH1 on the side surface, respectively.

• Wind and Structures
• /
• 제35권1호
• /
• pp.55-66
• /
• 2022

Tall buildings are often subjected to steady and unsteady forces due to external wind flows. Measurement and mitigation of these forces becomes critical to structural design in engineering applications. Over the last few decades, many approaches such as modification of the external geometry of structures have been investigated to mitigate wind-induced load. One such proven geometric modification involved the rounding of sharp corners. In this work, we systematically analyze the impact of rounded corner radii on the reducing the flow-induced loading on a square cylinder. We perform 3-Dimensional (3D) simulations for high Reynolds number flows (Re=1 × 105) which are more likely to be encountered in practical applications. An Improved Delayed Detached Eddy Simulation (IDDES) method capable of capturing flow accurately at large Reynolds numbers is employed in this study. The IDDES formulation uses a k-ω Shear Stress Transport (SST) model for near-wall modelling that prevents mesh-induced separation of the boundary layer. The effects of these corner modifications are analyzed in terms of the resulting variations in the mean and fluctuating components of the aerodynamic forces compared to a square cylinder with no geometric changes. Plots of the angular distribution of the mean and fluctuating coefficient of pressure along the square cylinder's surface illustrate the effects of corner modifications on the different parts of the cylinder. The windward corner's separation angle was observed to decrease with an increase in radius, resulting in a narrower and longer recirculation region. Furthermore, with an increase in radius, a reduction in the fluctuating lift, mean drag, and fluctuating drag coefficients has been observed.