• Title/Summary/Keyword: Window width

검색결과 141건 처리시간 0.022초

Liver PET/MRI 검사 시 MR 기반 호흡 움직임 보정 방법의 유용성 평가 (Evaluation of MR Based Respiratory Motion Correction Technique in Liver PET/MRI Study)

  • 도용호;이홍재;김진의;노경운
    • 핵의학기술
    • /
    • 제22권1호
    • /
    • pp.15-22
    • /
    • 2018
  • PET/MRI 검사 시 호흡에 의한 움직임은 영상의 질 저하는 물론 종양의 크기, 표준섭취계수의 오차를 발생시키는 원인이 된다. 본 연구에서는 일체형 PET/MRI 장비에서 MR기반 호흡 움직임 보정 방법의 적용에 따른 종양의 표준섭취계수, 크기와 영상 품질 변화를 평가하고자 하였다. Biograph mMR 3.0T (Siemens, Germany)장비에서 2016년 3월부터 7월까지 $^{18}F-FDG$ liver PET/MRI 검사를 시행한 30명 ($62.5{\pm}10.2$세)의 데이터를 분석하였다. 7분의 PET listmode 데이터를 획득하는 동안 MR 기반 호흡 움직임 보정 방법인 MAG, MTG와 NG T1 weighted MR 영상을 획득하였다. Gated PET 영상의 재구성은 35% efficiency window가 적용된 MAG와 MTG로부터 획득된 감쇄보정영상을 이용하여 시행하였다. Non-gate, MAG, MTG 영상에서 측정된 종양의 표준섭취계수와 Z축 방향의 크기 그리고 반치폭을 분석하였다 평균 $SUV_{max}$$SUV_{peak}$는 NG 대비 MAG 13.15%(P<0.0001), 8.66%(P<0.0001), MTG 13.27%(P<0.0001), 8.80%(P<0.0001) 증가하였으며 Z-축에서 평균 종양의 크기와 반치폭은 MAG 14.47%(P<0.0001), 15.49%(P=0.0004), MTG 14.89%(P<0.0001), 15.79%(P=0.0003) 감소하였으며 통계적으로 유의한 차이를 보였다. MAG와 MTG 비교 평가에서 MTG의 $SUV_{max}$$SUV_{peak}$는 MAG 대비 0.07%(P=0.8802), 0.13%(P=0.7766) 증가하였으며 Z-축에서 평균 종양의 크기와 반치폭은 0.49%(P=0.2786), 0.36%(P=0.2488) 감소하였다. 약 7분과 2분의 추가 검사시간이 필요한 MAG와 MTG에서 표준섭취계수와 종양의 크기, 반치폭에서 통계적으로 유의한 차이가 없었다. 간 PET/MRI 검사 시 MR 기반 호흡 움직임 보정 방법을 적용하였을 때 NG 대비 MAG, MTG 모두에서 표준섭취계수와 종양의 크기 및 공간분해능이 개선되었으며 MAG와 MTG의 결과 값은 통계적으로 유의한 차이가 없었다. 호흡에 의한 움직임에 영향을 받는 다양한 상 복부 검사에 MBRMCT를 적용 시 추가적인 장비의 설치 없이 약 2분의 추가 검사시간이 필요한 MTG 방법 적용하여 NG 대비 보다 정확한 정보를 제공할 수 있을 것으로 사료된다.

PLS 선형가속기 진공계의 운전특성 (Operatonal characteristics of the PLS linac vacuum system)

  • 김임경;박용정;김경렬;남궁원
    • 한국진공학회지
    • /
    • 제5권4호
    • /
    • pp.269-277
    • /
    • 1996
  • PLS 선형가속기 진공계는 클라이스트론 첨두출력 54MW, 펄스폭 4.1$\mu \textrm s$, 반복율 10Hz의 마이크로파 전력 공급상태에서 $2.6\times 10^{-6}$Pa의 진공도를 유지하고 있으며 $45^{\circ}C$ 운전조건에서 마이크로파 전력이 공급되지 않았을 때 진공도는 $2.4\times 10^{-6}$Pa이다. 설치 초기에 $3.0\times 10^{-11}Torr-l/sec-\textrm{cm}^2$이었던 가스방출율은 각 가속단위마다 약 140 GJ의 마이크로파 에너지가 전파된 현재 $1\times 10^{-12}Torr-l/sec-\textrm{cm}^2$이다. 주 장비로 사용중인 이온펌프는 모두 포화된 상태이며 60 l/s, 120 l/s, 230 l/s 이온펌프의 유효배기속도는 운전 영역에서 각각 45 l/s, 65 l/s, 140 l/s이다. 진공계 운전중 야기된 문제점들로는 이온펌프 및 진공 게이지 전원제어기의 오동작, 에너지 배가장치의 출력창, 전자총 및 가속관 종단부하의 진공누출 등이었다. 최근 일년간 총 41회에 140.8시간 운전 중지를 경험하여 98%의 가용도(availability)를 나타내었다. 추후 시험중인 도파관 밸브와 개발중인 가속관 종단부하가 설치된다면 가용도를 99.5% 이상으로 증가시킬 수 있을 것으로 기대한다.

  • PDF

흉부CT 검사 시 HRCT 영상 재구성의 유용성 (Usefulness Evaluation of HRCT using Reconstruction in Chest CT)

  • 박성민;김긍식;강성민;유병규;이기배
    • 대한디지털의료영상학회논문지
    • /
    • 제17권1호
    • /
    • pp.13-18
    • /
    • 2015
  • Purpose : Skip the repetitive HRCT axial scan in order to reduce the exposure of patients during chest HRCT scan, Helical Scan Data into a reconstructed image, and exposure of the patient change and visually evaluate the usefulness of the HRCT images. Materials and method : Patients were enrolled in the survey are 50 people who underwent chest CT scans of patients who presented to the hospital from January 2015 to March 2015. 50 people surveyed 22 people men and 28 people women people showed an average distribution of 30 to 80 years age was 48 years. 50 patients to Somatom Sensation 64 ch (Siemens) model with 120 kVp tube voltage to a reference mAs tube current to mAs (Care dose, Siemens) as a whole, including the lungs and the chest CT scan was performed. Scan upon each patient CARE dose 4D (Automatic exposure control, Siemens Medical Solution Erlangen, Germany) was to maintain the proper radiation dose scan every cross-section through a device that automatically adjusts the tube current of. CT scan is the rotation time of the Tube slice collimation, slice width 0.6 mm, pitch factor was made under the terms of 1.4. CT scan obtained after the raw data (raw data) to the upper surface of the axial images and coronal images for each slice thickness 1 mm, 5 mm intervals in the high spatial frequency calculation method (hight spatial resolution algorithm, B60 sharp) was the use of the lung window center -500 HU, windows were reconstructed into images in the interval -1000 HU to see. Result : 1. Measure the total value of DLP 50 patients who proceed to chest CT group A (Helical Scan after scan performed with HRCT) and group B (Helical Scan after the HR image reconstruction to the original data) compared with the group divided, analysis As a result of the age, but show little difference for each age group it had a decreased average dose of about 9%. 2. A Radiation read the results of the two Radiologist and a doctor upper lobe and middle lobe of the lung takes effect the visual evaluation is not a big difference between the two images both, depending on the age of the patient, especially if the blood vessels of the lower lobe (A: 3.4, B: 4.6) and bronchi(A: 3.8, B4.7) image shake caused by breathing in anxiety (blurring lead) to the original data (raw data) showed that the reconstructed image is been more useful in diagnostic terms. Conclusion : Scan was confirmed a continuous, rapid motion video to get Helical scan is much lower lobe lung reduction in visual blurring, Helical scan data to not repeat the examination by obtaining HRCT images reorganization reduced the exposure of the patient.

  • PDF

($Implantium^{(R)}$) implant의 단기 생존율 및 치유 양상에 대한 연구 (The analysis of short term success rate and healing patterns of $Implantium^{(R)}$ Implant)

  • 채경준;정성민;정의원;조규성;채중규;김종관;최성호;김창성
    • Journal of Periodontal and Implant Science
    • /
    • 제36권3호
    • /
    • pp.683-691
    • /
    • 2006
  • This study is an analysis of distribution of patients who installed Implantium implant in Yonsei University Dental Hospital and types of implant site for about 1 years recall check and success rate. 164 implants were installed to 52 patients in this study. It shows the conclusion below. 1. Patients at the age of 40s and 50s were 65% of all implant cases and average number of implant was 4 (man), and 2.7 (woman). 75 implants were operated on maxilla and 89 were mandible. 19 implants on anterior region and 145 implants on posterior region. 2. Most distribution of bone qaulity for implant site was type III(37.2%) and bone quantity was type C(61. 7%) 3. The majority of implants were those of 10, 12mm in length (85%) and regular diameter in width (48.8%). 4. 30 implants were installed with the advanced technique-GER, window opemng, osteotome technique. 5. Two implants were removed before prosthodontic treatment due to the osseointegraton failure. The success rate was 98.8% in 15.2 months follow up period and the marginal bone loss was 0.28mm. The results provided us with basic data on patient type, implant distribution, bone condition, and survival rate. Within the limit of present study, It was concluded that Implantium implant could be used satisfactorily in various clinical situations.

The New X-ray Induced Electron Emission Spectrometer

  • Yu.N.Yuryev;Park, Hyun-Min;Lee, Hwack-Ju;Kim, Ju-Hwnag;Cho, Yang-Ku;K.Yu.Pogrebitsky
    • 한국결정학회:학술대회논문집
    • /
    • 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
    • /
    • pp.5-6
    • /
    • 2002
  • The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.

  • PDF

강릉지역 산사태의 기하학적 특성과 절리특성에 관한 연구 (The Geometric Characteristics of Landslides and Joint Characteristics in Gangneung Area)

  • 조용찬;장태우
    • 지질공학
    • /
    • 제16권4호
    • /
    • pp.437-453
    • /
    • 2006
  • 2002년 태풍 '루사'로 인하여 집중호우가 내린 강릉지역에는 3,000개가 넘는 토석류 산사태가 발생하였다. 그 중에서도 산사태가 가장 집중적으로 발생한 강릉시 사천지역과 주문진-연곡지역의 산사태를 대상으로 야외조사를 통해 1,365개소의 산사태 자료를 수집하여 산사태 발생 원인과 기하학적 특징에 관해 분석하였다. 연구지역에 발생한 산사태의 평균규모는 폭 10 m, 길이 30 m, 사면경사는 $21^{\circ}{\sim}35^{\circ}$로 분석되었고, 산사태의 평면형상은 사태의 상단부보다 하단부의 폭이 넓은 'A'형태가 50.5% 정도를 차지하고 있다. 그리고 사천면의 산불피해 지역은 산사태의 발생 빈도가 더 높게 나타나고 있다. 산사태가 발생한 사면의 방향은 일정한 경향을 보여주는데, 그 원인은 풍화에 의한 지형적 특징과 집중호우가 내릴 때 동반된 강한 바람의 영향인 것으로 해석되었다. 연구지역에서 249개의 절리를 측정하여 방향성을 분석하였으며, 절리밀도를 산정하기 위하여 51개소에서 창틀 조사방법을 수행하였으며, 그 결과 절리 밀도가 $0.05{\sim}0.1$ 범위에 해당하는 지역에서 산사태가 많이 발생하였다.

섬잣나무(Pinus parviflora S. et Z.) 지재의 압축이상재, 측면재, 대응재에 관한 해부학적 특성 비교 (Anatomical Comparison of Compression, Opposite, and Lateral Woods in a Branch of Pinus parviflora S. et Z.)

  • 허광수;엄영근
    • Journal of the Korean Wood Science and Technology
    • /
    • 제33권1호통권129호
    • /
    • pp.38-47
    • /
    • 2005
  • 본 연구는 섬잣나무(Pinus parviflora S. et Z.) 지재에 발달되어 있는 압축이상재, 측면재 및 대응재의 조직학적 특성을 광학현미경과 주사전자현미경을 이용하여 비교, 검토하였다. 조재로부터 만재로의 가도관 이행은 압축이상재가 측면재나 대응재보다 상대적으로 더 점진적이었다. 그리고 연륜폭과 만재율은 압축이상재가 측면재 혹은 대응재보다 큰 경향을 보였다. 횡단면상 만재 가도관의 형상에 있어 정방형 내지 다각형을 나타내는 측면재 및 대응재와는 달리 압축이상재는 원형을 나타냈다. 세포간극, 나선강, 나선째짐 및 슬릿형 벽공구는 압축이상재에만 발달하였다. 그러나 우상층은 측면재 및 대응재뿐만 아니라 압축이상재 가도관에서도 모두 관찰되었다. 압축이상재의 교분야벽공은 정상적인 창상형 벽공이 아니라 심한 변형을 통해 편백형 내지 삼나무형 벽공을 나타내기 때문에 식별 인자로 이용될 수 없는 것으로 나타났다. 그리고 방추형방사조직의 폭과 높이는 압축이상재가 측면재 및 대응재의 것보다 넓고 낮은 모습을 보였다. 결론적으로 압축이상재의 해부학적 특징은 측면재나 대응재와 상이한 특성을 나타냈으나 대응재와 측면재 사이에는 해부학적 차이가 거의 없었다.

인도네시아산 주요 조림수종의 해부학적 특성 II (Anatomical Characteristics of Major Plantation Species Growing in Indonesia II)

  • 장사라;장재혁;김종호;;김남훈
    • Journal of the Korean Wood Science and Technology
    • /
    • 제42권6호
    • /
    • pp.635-645
    • /
    • 2014
  • 최근 인도네시아에서 인공조림중인 8수종 목재자원의 효율적 이용방안 모색을 위해 해부학적 특성을 조사하였다. 침엽수종인 Damar와 Sumatran pine의 생장륜은 뚜렷하지 않았고 Sumatran pine은 수지구가 존재하였으나 Damar는 수지구가 관찰되지 않았다. Damar는 편백형과 삼나무형 벽공을 보였고, Sumatran pine은 창상벽공과 소나무형벽공의 분야벽공형태를 보였다. 두 수종 모두 $3,000{\mu}m$ 이하로 다소 짧은 가도관의 길이를 보였고, 방사조직은 주로 단열방사조직으로서 Sumatran pine의 경우 방추형 방사조직이 관찰되었다. 활엽수 수종은 모두 산공재였고 Afrika와 Simpur Batu는 고립관공, Angsana는 집단관공, Mahoni는 2~4열의 방사복합관공, Mindi와 Trembesi에서는 2~3열의 방사복합관공과 익상유조직, 연합익상유조직이 다른 수종에 비해 뚜렷하게 관찰되었다. Afrika, Mahoni와 Simpur Batu는 평복세포와 1~2열의 직립세포로 구성된 이성방사조직이, Angsana, Mindi와 Trembesi는 평복세포로 이루어진 동성방사조직이 관찰되었다. Simpur batu는 높이 1 mm를 초과하는 3~6열의 다열 방사조직 폭을 보였으며, 이외 5개 수종은 1~3열의 방사조직 폭을 보였다. 단위면적($mm^2$)당 관공의 수는 Angsana와 Simpur Batu가 다른 수종에 비해 많았으며 특히 Simpur Batu가 가장 많게 나타났다. 모든 수종의 목섬유길이는 수심부에서 수피로 갈수록 증가하는 경향을 보였으며, Simpur Batu가 가장 긴 섬유의 길이를, Angsana와 Trembesi가 가장 짧은 섬유길이를 나타냈다.

감마카메라의 Sensitivity 보정 Factor에 관한 연구 - 전신 뼈 영상을 중심으로 - (The Correction Factor of Sensitivity in Gamma Camera - Based on Whole Body Bone Scan Image -)

  • 정은미;정우영;류재광;김동석
    • 핵의학기술
    • /
    • 제12권3호
    • /
    • pp.208-213
    • /
    • 2008
  • 목적 : 전신 뼈 검사는 핵의학 에서 가장 많이 수행하는 대표적인 검사로서 서울아산병원 핵의학과에서는 다양한 감마 카메라(Philips BRIGHTVIEW, PRECEDENCE, Siemens - ECAM, ECAM signature, ECAM Plus, SYMBIA T2, GE - INFINIA)를 사용하여 검사를 시행하고 있다. 그러나 각각의 감마카메라는 같은 검사를 수행할지라도 여러 요인에 의해서로 다른 민감도를 가지며, 이는 전신 뼈 검사의 추적검사에 있어 진단의 일관성을 저해하는 요인이 되기도 한다. 따라서 전신 뼈 검사 시 주사 후 검사시간, 수분섭취량, 신진 대사 정도 등의 통제 불가능한 인자들은 제외하고 최소한의 통제 할 수 있는 감마카메라 그 자체의 민감도 보정을 목적으로, 본 연구에서는 각각의 감마카메라의 민감도를 측정하여 전신 뼈검사를 추적 검사(follow-up)로 시행하였을 경우 보정할 수 있는 합리적인 보정계수 산출에 대한 연구를 하였다. 실험재료 및 방법 : 각 감마카메라의 민감도 측정은 IAEA에서 권고하는 면 선원 민감도 측정 방법에 따라 BRIGHT-VIEW, PRECEDENCE, ECAM, ECAM signature, ECAM Plus, SYMBIA T2, INFINIA의 감마카메라 7대를 분석하였다. 민감도 측정을 위한 $^{99m}Tc$ 면 선원은 전신 뼈 검사에 일반적인 계수율인 4~7 Kcps를 기준으로 제작하였다. 모든 감마카메라는 저 에너지 고 분해능용 평행다중구멍 조준기 (Low Energy High Resolution multi parallel Collimator)를 장착하였고, 15%의 Window Width, 140-keV photopeak로 설정하였다. $^{99m}Tc$ 면 선원을 조준기에 최대한 밀착시킨 후 60초, 120초 동안 계수를 측정하여 보정계수를 산출하였다. $^{99m}Tc$ 면 선원으로 산출한 보정계수를 실제 환자 전신 뼈 검사에 적용시킬 수 있는지 확인하기 위하여 27명의 환자를 대상으로 전신 뼈 검사를 수행하고 보정계수를 적용 후 비교 분석하였다. 결과 : $^{99m}Tc$ 면 선원을 이용하여 실험한 결과, 각 감마카메라의 민감도는 ECAM plus가 가장 높았으며 ECAM signature, SYMBIA T2, ECAM, BRIGHTVIEW, INFINIA, PRECEDENCE 감마카메라 순으로 관찰되었다. 이를 기초로 하여 상대적으로 중간 정도의 민감도를 갖는 ECAM 감마카메라를 기준으로 보정계수를 산출했을 때 각각 1.07, 1.05, 1.03, 1.00, 0.90, 0.83, 0.72로 분석되었다. $^{99m}Tc$ 면 선원의 실험을 통해 산출한 보정계수와 전신 뼈 검사로 산출된 보정계수의 차이를 분석하였을 때 통계적으로 유의한 차이가 없었다(p<0.05). 결론 : 암환자의 골 전이 진단에 있어 전신 뼈 검사는 예민도가 높고 비침습적이며 비교적 쉽게 시행할 수 있는 장점이 있어 추적검사로 널리 이용되고 있다. 그러나 추적 검사로 전신 뼈 검사를 시행할 경우 연속적으로 동일한 감마카메라만을 사용하는 것은 여건상 불가능하며, 동일한 감마카메라를 사용한다 하더라도 시간의 경과에 따른 장비의 효율에 변화를 고려하지 않을 수 없다. 따라서 서로 다른 감마카메라를 대상으로 산출된 민감도 보정계수의 임상적 적용은 정기적으로 전신 뼈 검사를 받는 환자의 진단에 일관성을 더 해 줄 수 있을 것으로 기대된다.

  • PDF

4-, 6-, 10-MV X-선원에서 공기동이 흡수선량에 미치는 효과 : 후두모형 (Air Cavity Effects on the Absorbed Dose for 4-, 6- and 10-MV X-ray Beams : Larynx Model)

  • 김창선;양대식;김철용;최명선
    • Radiation Oncology Journal
    • /
    • 제15권4호
    • /
    • pp.393-402
    • /
    • 1997
  • 목적 : 공기동을 포함한 병소 부위에 X-선원을 조사할 경우 공동과 근접한 영역에서의 저흡수선량 효과는 잘 알려져 있다. 공기-연조직 사이의 불균질면의 한 예로 후두 모형 즉, 조직 둥가물질과 그 사이에 삽입되어 있는 공기동을 만들었다. 본 연구에서는 방사선의 선질 조사면의 크기 공기동의 크기에 따른 공동 가까이에서의 흡수선량의 변화를 살펴보았다. 대상 및 방법 : 4-, 6-, 10-MV X-선원을 이용하여 2cm(폭)$\times$L(cm, 길이)$\times$2cm(높이)인 공기동을 포함한 후두 모형의 아크릴 팬톰에 대하여 흡수선량을 측정하였다. 흡수선량의 측정장비로 평행판전리함과 전리계를 이용하였다. 제작한 후두의 기하학적 치수는 상부 연조직$\cdot$공기동$\cdot$하부 연조직의 두께가 각각 4-, 2-, 4-cm이었다. 공기동이 없이 균일한 연조직 팬톰에 대한 공기동이 있는 경우의 흡수선량의 비(O/E)를 공기 공동-연조직의 경계로부터 거리를 변화시키면서 측정하였다. 표준화된 중강곡선과 최대흡수선량에 대한 입사면 반대쪽 표면에서의 흡수선량의 비를 초사면의 크기를 변화시키면서 측정하였다. 공기동의 크기에 따른 효과를 알기 위하여 여러 가지 조사면에 대하여 투영된 크기가 4cm(폭)$\times$L인 공기동의 높이(Z)를 변화시켜서 측정하였다. 결과 : 4-MV선원에서 $5cm\times5cm$ 이상의 조사면에서는 저흡수선량 효과가 없었다. 6-이나 10-MV선원에서 작은 조사야 즉, $4cm\times4cm$$5cm\times5cm$에서는 후두에 저흡수선량 부위가 나타났으며 $6cm\times6cm$ 이상의 조사면에서는 이 효과가 관찰되지 않았다. 선원의 선질이 증가할수록 저흘수선량인 조직층이 증가하였고 이때 표면 흡수선량의 크기는 변하지 않았다. 조사면의 크기가 $4cm\times4cm$에서 $8cm\times8cm$로 증가할 때 최대흡수선량에 대한 입사면 반대쪽의 공기동의 표면 선량은 4-, 6-, 10-MV 선원에서 각각 0.95, 0.92, 0.91에서 0.99로 증가하였다. 6-이나 10-MV 선원에서 공기동 표면에서의 흡수선량은 $5cm\times5cm$ 조사면에 있어서 예상값보다 각각 2-, 3-퍼센트의 감소가 있었고 또 4-MV에서는 감소효과를 발견할 수 없었다. $4cm\timesL\timesZ$ 공기동에서 그높이(Z)를 0.6에서 4.8cm까지 변화시켰을 때 조사면의 크기가 $8cm\times8cm$에서 공동의 크기에 무관하게 O/E>1.0이 관찰되었다. 결론 : 조사면내 공기동에 의한 저흘수선량 효과는 방사선의 선질$\cdot$조사면의 크기$\cdot$공기동의 크기에 의존된다. 이상의 연구 결과에서 고선질 선원이 공동을 포함한 병소 특히, 종양이 공기동의 표면까지 미치는 부위에 조사될 째 특별한 주의가 필요함을 알 수 있다. 이 경운 가능하면 조사되는 부위가 저전량이 되지않도록 저선질의 선원(예를 들면, 4-MV)을 쓰고 또 조사면을 넓혀야한다. 6-이나 10-MV 등의 고선질의 X-선을 쓰는 경우에는 조사면의 부위에 저선랸 부위가 생기므로 한번의 추가 조사를 더 시행할 필요가 있다.

  • PDF