• 한국실내디자인학회논문집
• /
• 제18권6호
• /
• pp.184-193
• /
• 2009

In recent years, the architectural interest in the apartment design has been getting focused on qualitative improvement and design differentiation. Especially the facade design differentiation is one of the most important elements in this matter. The purpose of this study is to provide the basic informations that can be referenced when architects are dealing with exterior design by analyzed design types and characteristics of apartment entrances. Target apartment of this study was whasung dongtan the 2nd phase new city districts which was planned to solve a housing shortage in the capital region. Having examined eleven pilot districts, four 1st construction areas, and eight 2nd construction areas, - total 23 complexes - 282 apartment entrances in 212 apartment buildings were carefully researched. Apartment entrance design can be divided into 15 different design elements: design types and combination types, direction, shape, height, approach types, exterior wall finishes of entrance, exterior wall finishes of lower parts of apartment, handrail types of slope, floor finishes of slope, distribution ratio of piloti, ceiling height of piloti, floor finishes of piloti, space use of piloti, window establishment between piloti and elevator hall, landscape elements of piloti. Design characteristics of building entrances were also analyzed in 4 groups (I, II, III, IV) divided by construction contractors ranking. In conclusion, first, design types and combination types can be classified into 15 different kinds, and the group I and II tend to show wider variety of entrance combinations. Secondly, the height and volume of extrude entrance type tend to increase in the group I and II. Third, the spatial configuration of pilotis appears to show more of 'pass + store + break' rather than 'access', as we get closer to the group I.

• Journal of Periodontal and Implant Science
• /
• 제46권1호
• /
• pp.57-69
• /
• 2016

Purpose: The aim of this pilot study was to determine the osteoconductivity and dimensional stability of augmented sinuses using different ratios of biphasic calcium phosphate (BCP) in a rabbit sinus model. Methods: Each sinus of New Zealand white rabbits (2.5-3.5 kg) was assigned to one of two groups: BCP with a hydroxyapatite to ${\beta}$-tricalcium phosphate (HA:${\beta}$-TCP) ratio of 70:30 (group TCP30) and BCP with an HA:${\beta}$-TCP ratio of 30:70 (group TCP70). After preparing a window in the antral wall of a sinus, the Schneiderian membrane was elevated, and the applicable material was grafted. A fluorochrome calcein green was injected five days before euthanizing the animals at four months post-surgery. The specimens were analyzed histologically, histomorphometrically, and by using micro-computed tomography (micro-CT). Results: Micro-CT analysis revealed that the total augmented volume and the new bone volume did not differ significantly between the two groups whereas the resorption of materials was greater in the TCP70 group. The trabecular thickness, number, and separation also did not differ significantly between the two groups. Histomorphometrically, the areas of total augmentation, new bone, and residual material, as well as the ratio of new-bone-material contact did not differ significantly between the groups. Histologically, the residual particles were more scattered in the TCP70 group than in the TCP30 group. The fluorescence of the calcein green did not differ notably between the two groups. Conclusions: The osteoconductivity and dimensional stability of the two BCPs with different ratios tested in this study were comparable after four months of healing. Therefore, we conclude that both BCPs show promise as a bone substitute for sinus augmentation.

• 한국지진공학회논문집
• /
• 제19권2호
• /
• pp.55-62
• /
• 2015

Shear wall systems behave as individual wall because of openings like window and elevator cage. When coupling beams are installed in shear walls, they will have high strength and stiffness so that be less damaged by lateral loads like earthquake. However, coupling beam is difficult construction method. And arranging reinforcement of slender coupling beams are especially hard. It is because the details of coupling beam provided by ACI 318 are complex. In this paper, experiments were conducted using coupling beams with 3.5 aspect ratio to improve the details of slender coupling beams provided by ACI 318. Two specimens were proposed for this study. One specimen applied with bundled diagonally reinforcement only. Another specimen applied both bundled diagonally reinforcement and High-Performance Fiber Reinforced Cementitious Composite (HPFRCC) so that coupling beams have half of transverse reinforcement. All specimen were compared with a coupling beam designed according to ACI 318 and were evaluated with hysteretic behaviors. Test results showed that the performance of two specimen suggested in this study were similar to that of coupling beam designed according to current criteria. And it was considered that simplification of the details of reinforcement would be available if transverse reinforcement was reduced by using bundled diagonally reinforcement and HPFRCC.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.255-258
• /
• 2009

Leading developed countries have studied energy self-sufficient houses such as zero or low energy buildings to reduce energy consumption for buildings since the early 1990s. Moreover, some developed countries have actually constructed self-sufficient houses and operated them for demonstration, expanding use of such houses. Korea has also established Zero Energy Solar House(ZeSH) and studied energy independence. Therefore, this study analyzed research result regarding ZeSH, self-sufficient energy house hold of Korea, found out technologies used for heating energy independence, used building interpretation program(ESP_r) to evaluate performance of each factors and analyzed energy reduction quantitatively. Results from the research are as follows: Reduction rate of actual detached house's heating load was also analyzed quantitatively depending on application of each technology. When each factor was applied step-by-step, annual reduction rate of heating load depending on increase in insulation thickness reached 6.6~22.2 %. Annual reduction rate of heating load depending on increase insulation thickness, and change in window heating performance and area ratio reached 31.5 %. Annual reduction rate of heating load through high-sealing and high-insulation depending on change in leakage rate reached 40.0~88.9 %. Annual reduction of heating load, when Mass Wall and attached sun space was applied were applied reached 28.5~39.2 %, respectively.

• 한국축산시설환경학회지
• /
• 제16권2호
• /
• pp.109-114
• /
• 2010

$\bigcirc$ 현장조사 결과 우리나라 개방식 돈사의 측벽 비율은 윈치시설이 90% 이상이었고, 반무창은 5%였으며 무창 또한 5% 전후로 조사되었다. $\bigcirc$ 리모델링 돈사는 복도덕트로 입기를 하였고 지붕 또는 측벽배기로 하였고 이때 돈사의 폭 10~12 m, 길이 30~50m 전후로 조사되었다. $\bigcirc$ 에너지 절감효과를 위한 복도 설치는 개방식 돈사의 리모델링 개조시 돈사 출입문에 복도 2~3 m (돈사길이 비율 7~8%)를 설치가 양호하였다. $\bigcirc$ 리모델링 돈사의 환기시스템은 복도에서의 덕트를 통한 입기를 실시하고 양쪽 측벽을 판넬 등으로 밀폐화 (무창)를 하고 측벽배기를 하였다. $\bigcirc$ 폐사율 저감은 개선전 11% (47두)에서 개선후 3% (12두) (73% 감소) 되었으며, 에너지 절감효과는 개선전 155만 원 (5,595 kw)에서 개선후 73만 원이었다. $\bigcirc$ 경제성을 분석한 결과 400두 돈사를 리모델링 할 경우 겨울철 4개월 (12월부터 3월까지) 사육할 경우 2,835,680원 이익을 얻을 수 있었다.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.252-262
• /
• 2019

2016년 경주 지진에 이어 2017년 포항 지진까지 발생한 대한민국은 더 이상 지진에 대해 안전지대라고 할 수 없다. 이에 따라 재난환경에 적합한 피난시설의 필요성이 증대되고 있다. 본 연구에서는 경량 복합패널을 이용하여 기존 피난시설의 단점들을 보완할 수 있는 구호주거를 제작하고자 하였다. 이를 위해 경량 복합패널로 구성된 구호주거에 대한 구조 성능과 에너지성능을 평가하고자 하였다. 구호주거의 구조 성능을 평가하기 위해 경량 복합패널로 제작한 시스템에 대한 횡하중가력 실험을 진행하였다. 실험체는 접합 방식을 변수로 하여 2가지로 구성하였다. 또한 KBC 2016에 따라 실험체에 대한 지진하중과 풍하중을 산정하여 실험 결과와 비교하였다. 에너지성능은 냉난방 및 조명에너지 사용량을 최소화하기 위해 기준 패널을 활용한 남측창호 최적화기법을 활용하여 분석하였고, 창면적비, 창 총일사취득율 최적화를 진행하였다. 결과적으로 경량 복합패널로 제작된 실험체는 횡하중에 대해 충분히 안전한 성능을 보일 것으로 판단되며, 창면적비 0.38, 총일사취득율 0.5수준의 최적화 계획을 통한 저에너지 운용이 기대된다.

• 대한기계학회논문집B
• /
• 제34권1호
• /
• pp.61-66
• /
• 2010

최근 본 연구그룹은 국소적인 종횡비 증가를 기반으로 수평 분리벽 없이 검체의 3 차원 집속을 구현하는 3 차원 유체역학 집속 미세유체 장치(3D-HFMD)를 제안한 바 있다. 본 논문에서는, 다양한 형상 및 유동 조건에 따른 3D-HFMD 의 3 차원 유체역학 집속 거동 영향에 대한 연구를 수행하였다. 이에 3 차원 전산유체역학(CFD) 시뮬레이션을 통해, 형상 및 유동 조건 변화에 대한 기존의 미세유체 장치와 본 연구 그룹이 제안한 3D-HFMD의 3 차원 유체역학 집속의 매개변수 연구를 수행하였다. 수행된 CFD 시뮬레이션 결과를 바탕으로 3 차원 집속을 위한 채널 형상 디자인 및 유동 조건을 제안하였다.

• Architectural research
• /
• 제22권2호
• /
• pp.41-52
• /
• 2020

Laboratory buildings with specialized equipment and ventilation systems pose challenges in terms of efficient energy use and initial construction costs. Additionally, lab spaces should have flexible and efficient layouts and provide a comfortable indoor research environment. Therefore, this study aims to identify the correlation between the facade of a building and its interior layout from case studies of energy-efficient research labs and to propose passive energy design strategies for the establishment of an optimal research environment. The case studies in this paper were selected from the American Institute of Architects Committee on the Environment Top Ten Projects and Leadership in Energy and Environmental Design (LEED) certified research lab projects. In this paper, the passive design strategies of space zoning, façade design devices to control heating and cooling loads were analyzed. Additionally, the relationships between these strategies and the interior lab layouts, lab support spaces, offices, and circulation areas were examined. The following four conclusions were drawn from the analysis of various cases: 1) space zoning for grouping areas with similar energy requirements is performed to concentrate similar heating and cooling demands to simplify the HVAC loads. 2) Public areas such as corridor, atrium, or courtyard can serve as buffer zones that employ passive solar design to minimize the mechanical energy load. 3) A balanced window-to-wall ratio (WWR), exterior shading devices, and natural ventilation systems are applied according to the space programming energy requirements to minimize the dependence on mechanical service. 4) Lastly, typical laboratory space zoning categories can be revised, reversed, and even reconfigured to minimize the energy load and adjust to the site context. This study can provide deep insights into various design strategies employed for construction of green laboratories along with intuitive arrangement of various building components such as laboratory spaces, lab support spaces, office spaces, and common public areas. The key findings of this study can contribute towards creating improved designs of laboratory facilities with reduced carbon footprint and greenhouse emissions.

• 한국실내디자인학회논문집
• /
• 제21권5호
• /
• pp.34-45
• /
• 2012

In these days, restaurants are not simply used as a physical space but used as a cultural space in which people can enjoy and experience different cultures and traditional images. Moreover, from the restaurants design elements which help to form the atmosphere of the restaurants which serve food of specific country, we can see the history and traditions of that country. The additional value of the traditional decorative components which are the main factors forming the atmosphere of the restaurant will be different according to the various expressions used in the restaurant space. For this article, 12 restaurants, Norangjugory korean restaurant, Yongsusan korean restaurant, Best well-bing food restaurant, Awoolim, Mugunhwa, Ondal in Korea, and Songhelou, South Beauty, Xuxian restaurant & lounge, Beijing dadong roast duck restaurant, The horizon chinese restaurant, Dynasty jade garden in China, were selected for the field study. This study focused on a comparative analysis of the traditional decorative elements, especially, the application rate of the traditional decorative elements. The analyzed elements are nature, religious beliefs, history and culture for the intangible elements and facade, courtyard, trademark, ground, wall, ceiling, door, window, furniture and adornment for the tangible elements. After that, we analyzed the rates of the use of traditional decorative elements and modern decorative elements. Through the survey result and ratio analysis, we concluded as below. In Korean restaurant, traditionality is expressed in furnitures while, in Chinese restaurant, traditionality is expressed in decorative pattern. When it comes to the intangible elements among the traditional decorative components of the Korean and Chinese restaurants, Chinese and Korean restaurants have similarities in emphasizing the natural elements. Korean restaurants focus much on the environmentally friendly parts, while Chinese restaurants focus much on the fantastic natural atmospheres like those shown and expressed in the poems. As for religion characteristics, Chinese restaurants emphasize "geomancy" more than Korean restaurant. When it comes to the visible elements among the traditional decorative components of the Korean and Chinese restaurants, in Korean restaurants, the interior part has more traditionality than exterior part, while in Chinese restaurants, the exterior part has more traditionality than the interior part.

• 한국음향학회지
• /
• 제36권5호
• /
• pp.329-337
• /
• 2017

미국과 영국에서는 교실의 적정한 음환경을 제공하기 위하여 잔향시간 및 배경소음에 대한 기준이 수립되어 있다. 또한 이를 실현하기 위한 건축계획방법 및 실내마감재 적용에 대한 가이드라인을 제시하고 있다. 그러나 대한민국의 경우 학교 교실의 배경소음 기준을 만족하기 위한 가이드라인이 부족할 뿐만 아니라 이에 기초가 되는 교실 벽체의 차음성능에 대한 실태조사가 부족한 실정이다. 본 연구에서는 학교 교실의 실내외 소음에 대한 차음성능을 조사하기 위하여 대한민국 청주시 소재 중학교 2개소의 외부벽체와 실간벽체의 구조를 조사하였다. 실내외 벽체의 차음성능 및 측로전달소음을 비교분석하기 위하여 투과손실, 가중 표준화 음압레벨차, 음향 감쇠 계수, 신호대잡음비 등을 측정하였다. 연구결과 실간벽체의 경우 건식벽으로 건립된 학교의 차음성능이 습식벽보다 높게 나타났으며, 특히 중고파수대역에서 높은 차음성능을 나타내었다. 외부벽체의 경우 각 학교 별로 차음성능을 비교하였을 때 단창을 이중으로 배치한 학교보다 복층유리를 사용한 학교의 성능이 더 높은 것으로 나타났다. 또한 측로전달소음의 경우 창문을 모두 개방하거나 복도 측 창문과 문을 연 경우 기준을 초과하는 것으로 나타나 내부 소음에 의해 학생이 음성전달에 방해를 받을 수 있음을 알 수 있었다.