• 한국해안·해양공학회논문집
• /
• 제32권5호
• /
• pp.351-362
• /
• 2020

2003년 남해안에 내습한 태풍 매미에 의해 발생한 폭풍해일과 파랑을 JMA-MSM 예보기상자료, NCEP-CFSR 재분석 기상자료, ECMWF-ERA5 재분석 기상자료, JTWC의 최적경로를 이용한 기상자료를 이용하여 수치모의하고, 계산된 해일고를 전국 해안의 항만에서 관측된 폭풍해일 시계열 자료와 비교하였다. 폭풍해일과 동시에 발생하는 파랑에 대해서는 계산된 유의파고를 관측 자료와 비교하였다. 이 비교를 통해 태풍 매미에 대한 각종 기상장의 신뢰도를 평가하였다. 그 결과 JMA-MSM 기상자료가 가장 신뢰도가 높았고, JTWC의 최적경로를 이용한 기상자료도 상당히 우수하게 나타났다. ECMWF-ERA5 기상자료는 전반적으로 해일고나 파고의 크기가 작게 나타났으며, NCEP-CFSR 기상자료는 태풍 매미의 특정 경우에 대해 신뢰도가 가장 낮게 나타났다. 이 연구를 통하여 폭풍해일과 파랑을 추산하기 위해 신뢰도 높은 기상장이 필수적임을 알 수 있었다.

• 해양환경안전학회지
• /
• 제20권2호
• /
• pp.247-258
• /
• 2014

본 연구에서는 조간대가 발달한 우리나라 전북 서해안의 구시포 해안에서 연안류에 미치는 외력성분을 평가하기 위하여 조석 조류 및 파에 의한 해빈류를 고려한 복합해수유동모형을 구축하였다. 구축된 모형에서 조석 조류는 EFDC 모형, 파랑은 SWAN 모형, 그리고 해빈류는 SHORECIRC 모형을 사용하였다. 이 수치모형의 적용성을 검토하기 위하여, 현지에서 조석 조류와 입사파를 현장관측하였고 인근 기상관측소의 바람자료를 조사하였다. 그리고 현지의 조간대에서 GPS를 장착한 경량 Drogue의 추적실험을 수행하고 연안류 성분을 추출하였다. 또한 현장관측조건에 맞추어 수치모형에 의한 수치 Drogue 추적실험을 수행하고 그 결과를 관측치와 비교 검토하였다. 그 결과, 수치 Drogue의 이동속도는 현장자료에 대해 68.0~105.2 %의 범위로서 재현되었으며, 주류성분의 오차는 - 16.7~ +10.0 %로서 양호하였다. 그리고 연안류 성분은 주로 바람과 조류가 큰 영향을 미치는 것으로 나타났으며, 해저경사가 아주 완만하여 쇄파대폭이 넓은 조간대에서 입사파고가 작은 파가 내습하는 경우의 해빈류는 연안류의 흐름에 미치는 영향이 미약한 것으로 분석되었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2023년도 추계학술대회
• /
• pp.116-118
• /
• 2023

최근 환경오염에 대한 규제 강화로 인해 선박 운항은 경제적이며 지속가능한 최적화 항법에 대한 필요성이 대두되고 있다. 하지만 기상예보 기술의 발전에도 불구하고, 여전히 잘못된 기상예보로 인한 악천후에 조우하는 선박 사고들은 지속적으로 발생하고 있다. 본 연구에서는 악천후에 조우하는 선박의 실태를 파악하고 분석하기 위해, 운항중인 선박의 정보를 측정하고자 하였다. 여기서 측정한 데이터의 종류는 항해 (위치, 속도, 방위, 타각 등) 및 엔진 (엔진 회전수, 출력, 축 추력, 연료 소비량) 관련 정보, 기상 상태 (바람, 파도), 선박운동 (선박종, 횡운동 등) 등의 정보들이 포함되었다. 실측 실험을 시행한 선박의 종류는 28,000 DWT급 벌크선, 63,000 DWT급 벌크선, 20,000 TEU급 컨테이너선, 12,000 TEU급 컨테이너선박이다. 각 선박의 실선실험은 여러 가지 종류의 데이터를 각각 취득하여 다목적으로 선박 운항에 관련한 연구들에 활용하고자 한다. 또한 실선실험 시의 해상 상태를 확인하기 위해, 파도 시뮬레이션 모델을 이용하여 방향성 파랑 스펙트럼 등을 재현하였다. 실선 실험의 데이터 취득 및 파도 시뮬레이션 결과 등을 통하여, 선박레이더를 이용한 정확한 파도정보 파악 및 화물 붕괴 사고 등에 대한 연구를 진행하고 있다. 이에 더불어, 선박운항의 안전성 및 효율성 관점에서 다양하게 활용될 것으로 기대된다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.63-69
• /
• 2000

Korea Institute of Geology Mining and Materials(KIGAM) cooperating with Southern Methodist University(SMU) has been operating seismo-acoustic array in Chul-Won area to discriminate man-made explosions from natural earthquakes since at the end of July 1999. In order to characterize propagation parameters of detected seismo-acoustic signal and to associate these signals as a blast event accompanying seismic and acoustic signals simultaneously it is necessary to understand infrasound wave propagation in the atmosphere. Two comparable Effective Sound Velocity Structures(ESVS) in atmosphere were constructed by using empirical model (MSISE90 and HWM93) and by aerological observation data of Korea Meteorological Administration (KMA) at O-San area. Infrasound propagation path computed by empirical model resulted in rare arival of refracted waves on ground less than 200km from source region. On the other hand Propagation paths by KMA more realistic data had various arrivals at near source region and well agreement with analyzed seismo-acoustic signals from Chul-Won data. And infrasound propagation in specific direction was very influenced by horizontal wind component in that direction. Linear travel time curve drawn up by 9 days data of the KMA in autumn season showed 335.6m/s apparent sound velocity in near source region. The propagation characteristics will be used to associate seismo-acoustic signals and to calculate propagation parameters of infrasound wave front.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.236-244
• /
• 2014

Although a safety assessment of damaged ships, which considers environmental conditions such as waves and wind, is important in both the design and operation phases of ships, in Korea, rules or guidelines to conduct such assessments are not yet developed. However, NATO and European maritime societies have developed guidelines for a safety assessment. Therefore, it is required to develop rules or guidelines for safety assessments such as the Naval Ship Code (NSC) of NATO. Before the safety assessment of a damaged ship can be performed, the available damage scenarios must be developed and the safety assessment criteria must be established. In this paper, the parameters related to damage by accidents are identified and categorized when developing damage scenarios. The need for damage safety assessment criteria is discussed, and an example is presented. In addition, a concept and specifications for the DB-based supporting system, which is used in the operation phases, are proposed.

• 천문학회보
• /
• 제40권1호
• /
• pp.63.1-63.1
• /
• 2015

In this study, we determine coronal electron density distributions by analyzing DH type II radio observations based on the assumption: a DH type II radio burst is generated by the shock formed at a CME leading edge. For this, we consider 11 Wind/WAVES DH type II radio bursts (from 2000 to 2003 and from 2010 to 2012) associated with SOHO/LASCO limb CMEs using the following criteria: (1) the fundamental and second harmonic emission lanes are well identified; (2) its associated CME is clearly identified in the LASCO-C2 or C3 field of view at the time of type II observation. For these events, we determine the lowest frequencies of their fundamental emission lanes and the heights of their leading edges. Coronal electron density distributions are obtained by minimizing the root mean square error between the observed heights of CME leading edges and the heights of DH type II radio bursts from assumed electron density distributions. We find that the estimated coronal electron density distribution ranges from 2.5 to 10.2-fold Saito's coronal electron density models.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.296-300
• /
• 2003

The autopilot system targets decreasing labor, working environment improvement, service safety security and elevation of service efficiency. Ultimate purpose is minimizing number of crew for guarantee economical efficiency of shipping service. Recently, being achieving research about Course Keeping Control, Track Keeping Control, Roll-Rudder Stabilization. Dynamic Ship Positioning and Automatic Mooring Control etc. which compensate nonlinear characteristic using optimizing control technique. And application research is progressing using real ship on actual field. Relation of Rudder angle which adjusted by Steering Machine and ship-heading angle are non-linear. And Load Condition of ship as non-linear element that influence to Parameter of ship. Also, because the speed of a current and direction of waves, velocity and quantity of wind etc. that is disturbance act in non-linear from, become factor who make serv ice of shipping painfully. Therefore, service system of shipping requires robust control algorithm that can overcome nonlinearity. In this paper, Using fuzzy algorithm ,Design autopilot system of ship that could overcome the non-linear factor of ship and disturbance and examined result through simulation.

• 한국해양공학회지
• /
• 제31권3호
• /
• pp.208-218
• /
• 2017

The performance of a wave energy converter (WEC) that uses the rolling motion of a partially submerged pendulum plate in front of a quay wall was analyzed. The wave exciting moment and hydrodynamic moment were obtained using a matched eigenfunction expansion method (MEEM) based on the linear potential theory, and then the roll motion response of a pendulum plate, time averaged extracted power, and efficiency were investigated. The optimal PTO damping coefficient was suggested to give the optimal extracted power. The peak value of the optimal extracted power occurs at the resonant frequency. The resonant peak and its width increase as the submergence depth of the pendulum plate decreases and thickness of the pendulum plate increases. An increase in the wave incidence angle reduces the efficiency of the wave energy converter. In addition, the WEC using a rolling pendulum plate contributes not only to the extraction of the wave energy, but also to a reduction in the waves reflected from the quay wall, which helps to stabilize ships going near the quay wall.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.299-304
• /
• 2001

The current study describes experimental and computational work on the passive control of the steady and unsteady condensation shock waves, which are generated in a transonic nozzle. The bleed slots are installed on the contoured wall of the transonic nozzle in order to control the magnitude of the condensation shock wave and its oscillations. For computations, a droplet growth equation is incorporated into the two-dimensional Navier-Stokes equation systems. Computations are carried out using a third-order MUSCL type TVD finite-difference scheme with a second-order tractional time step. Baldwin-Lomax turbulence model is employed to close the governing equations. An experiment using an indraft transonic wind tunnel is made to validate the computational results. The current computations represented well the experimental flows. From both the experimental and computational results it is found that the magnitude of the condensation shock wave in the bleed slotted nozzle is significantly reduced, compared with no passive control of solid wall. The oscillations of the condensation shock wave are successfully suppressed by a bleed slot system.

• 한국해양공학회지
• /
• 제25권4호
• /
• pp.1-6
• /
• 2011

The installation of a topside structure can be categorized into the following stages: start, pre-lifting, lifting, lifted, rotating, positioning, lowering, mating, and end of installation. The transfer of the module onto the floating spar hull occurs in the last three stages, from lowering to the end. The coupled multi-body motions are calculated in both calm water and in irregular waves with a significant wave height (1.52m). The effects of the hydrodynamic interactions between the heavy lifting vessel and the spar hull during the lowering and mating stages are considered. The internal forces caused by the load transfer and ballasting are derived for the mating phases. The results of the internal forces for the calm water condition are compared with those in the irregular sea condition. Although the effect of the pitch motion on the relative vertical motion between the deck of the floating structure and the topside module is significant in the mating phases, the internal force induced pitch motion is too small to have this influence. However, the effect of the internal force on the wave-induced heave responses in the mating phases is noticeable in the irregular sea condition because transfer mass-induced draught changes for the floating structure are observed to have higher amplitudes than the external force induced responses. The impacts of the module on the spar hull in the mating phase are investigated.