• Korean Journal of Agricultural Science
• /
• v.9 no.1
• /
• pp.357-370
• /
• 1982

Recent concern regarding price and availability of fossil fuels has spurred the interest in alternative sources for farm crop drying. Among the available options such as biomass energy, wind power, nuclear energy and solar energy etc., the increasing attention is being directed to the utilization of heat from solar energy especially for farm crop drying. Even though solar energy is dispersed over a large land area and only a relatively small amount of energy can be simply collected, the advantages of solar energy is that the energy is free, non-polluting. The study reported here was designed to help supply the informations for the development of simple and relatively inexpensive solar warehouse for farm crop drying and storage. Specifically, the objectives of this study were to determine the performance of the solar collector fabricated, to compare solar supplemented heat drying with natural air drying and to develop a simulation model of temperature in stored grain, which can be used to study the effects due to changes in ambient air temperature. For those above objectives, solar collector was fabricated from available materials. Corrugated steel galvanized sheet, painted flat black, was used as absorbers and clear 0.2mm polyethylene sheet was the cover material. The warehouse for rough rice drying and storage was constructed with concrete block, and the solar collector was used as the roof of warehouse instead of original roofing system of it. The results obtained in this study were as follows: 1. The thermal efficiency of the solar collector was average 26 percent and the overall heat transfer coefficient of the collector was approximately $25kJ/hr.m^2\;^{\circ}K$. 2. Solar heated air was sufficient to dry one cubic meter of rough rice from 23.5 to 15.0 percent in 7 days and natural air was able to dry the same amount of rough rice from 20.0 to 5 percent in l2 days. 3. Drying with solar heat reduced the required drying time to dry the same amount of rough rice into a half compared to natural air drying, but overdrying problems of the bottom layer were so severe that these problems should be thoroughly analyzed. 4. Simulation model of temperature in stored grain was developed and the results of predicted temperature agreed well with test results. 5. Based on those simulated temperature, changes in the grain-temperature were a large at the points of the wallside and the damage of the grain would be severe at the contact area of wall.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.31-40
• /
• 2014

The Korean government made the 2nd Energy Basic Plan to achieve 11% of new and renewable energies distribution rate until 2035 as a response to cope with international discussion about greenhouse gas emission reduction. Renewable energies include solar thermal, photovoltaic, bioenergy, wind power, small hydropower, geothermal energy, ocean energy, and waste energy. New energies contain fuel cells, coal gasification and liquefaction, and hydrogen. As public and private investment to enhance the distribution of new and renewable energies, it is necessary to clarify the economic effects of the new and renewable energies sector. To the end, this study attempts to apply an input-output analysis and analyze the economic effects of new and renewable energies sector using 2012 input-output table. Three topics are dealt with. First, production-inducing effect, value-added creation effect, and employment-inducing effect are quantified based on demand-driven model. Second, supply shortage effects are analyzed employing supply-driven model. Lastly, price pervasive effects are investigated applying Leontief price model. The results of this analysis are as follows. First, one won of production or investment in new and renewable energies sector induces 2.1776 won of production and 0.7080 won of value-added. Moreover, the employment-inducing effect of one billion won of production or investment in new and renewable energies sector is estimated to be 9.0337 persons. Second, production shortage cost from one won of supply failure in new and renewable energies sector is calculated to be 1.6314 won, which is not small. Third, the impact of the 10% increase in new and renewable energies rate on the general price level is computed to be 0.0123%, which is small. This information can be utilized in forecasting the economic effects of new and renewable energies sector.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.4
• /
• pp.286-293
• /
• 2016

BACKGROUND: 18% of difenoconazole+iminoctadin triacetate microemulsion (3%+15%) formulation were mixed and sprayed as closely as possible to normal practice on the ten of farms located in the Youngju of South Korea. Patches, cotton gloves, socks, masks and XAD-2 resin were used to measure the potential exposure for applicators wearing standardized whole-body outer and inner dosimeter (WBD). This study has been carried out to determine the dermal and inhalation exposure to difenoconazole during preparation of spray suspension and application with a power sprayer on a grape orchard. METHODS AND RESULTS: A personal air monitor equipped with an air pump IOM sampler and cassette and glass fiber filter were used for inhalation exposure. The field studies were carried out in a grape orchard. The temperature and relative humidity were monitored with a thermometer and a hygrometer. Wind speed was measured using a pocket weather meter. All mean field fortification recoveries were between 97.3% and 119.6% in the level of 100 LOQ (limit of quantification) while the LOQ for difenoconazole was $0.025{\mu}g/mL$ using HPLC-UVD. The arms exposure to difenoconazole for the mixer/loader (0.0794 mg) was higher than other body parts (head, hands, upper body, legs). The exposure to difenoconazole in the legs for applicator (3.78 mg) was highest in the parts of body. The dermal exposure for mixer/loader and applicator were 0.02 and 2.28 mg on a grape orchard, respectively. The inhalation exposure during application was estimated as 0.02 mg. The ratio of inhalation exposure to dermal exposure was equivalent to 0.9% of the dermal exposure. CONCLUSION: The inhalation exposure for applicator indicated $18.8{\times}10^{-3}mg$, which was level of 0.9% of the dermal exposure (2.28 mg). Operator exposure (0.004 mg/kg bw/day) to difenoconazole during treatment for grape is calculated as 2.5% of the established AOEL (0.16 mg/kg bw/day).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.3 no.1
• /
• pp.1-11
• /
• 1979

This is a study on angels' costumes in religious paintings, especially as this relates to the questions of concepts and theological symbolism. Angels, as spiritual creatures in Christian thought, play the role of praising God's glory, as messengers of God, the role of guarding Israel and the Church, and protecting or punishing human beings. Sometimes the angels appear in incarnate form. They display no sexual differences and are not able to procreate. The angels' funtional classification being thus; nevertheless, they are pictured in various costumes and appearances according to characteristics of the paintings. The angel Michael appears as a man of dignity when pictured as a guard; the angel Gabriel in the annunciation is often portrayed as a woman of mystical beauty. Under the Renaissance, the mighty cherubim and seraphim at Yahweh's throne are degraded as plump child-angels, or winged child-heads looking alike Eros or Cupid. They have become playful and all too obviously non-heavenly chrubs, accepted features of the Temple decorations. However, cherubim are often depicted as naked or wrapped around with a piece of cloth and accompanied with wind, which symbolizes the Glory of God. The angels, costumes without seam are hung over or wrapped around the body, and when sewn they are simple and ample enough that they fall in a great many folds. However, by the 14C. angels are mostly dressed in costumes common to all Europe, and after that angels gradually appear in folk costumes; for example Italian, Flemish, etc. Dalmatic, the typical costume of Byzantine often shows up as angels' dresses even after the period. Originally the dalmatic was the Roman tunic to which Eastern influences added. The Roman clavus on the tunic had gradually lost distinction until, by the Imperial epoch, it was worn by the lowest servants. It was proudly therefore, as 'The servants of God', that the early Christians are shown wearing the clavus on their wide, ungirdled, sleeved dalmatics. In addition to their costume, angels have some other distinct charateristics. First, angels have a halo around their head; this symbolizes their holiness. Second, angels wear a narrow diadem or a queen's crown that seems to denote their glorious status close to God's throne. Third, the cloth band across the breast resembles a priest's stole, which suggests the sacred role of a priest and symbolizes the grace santified. Fourth, lilies in the annunciations are symbols of Mary's virginity. chastity, innocence and heavenly bliss. Angels hold palms or olives in their hands. The former denote prosperity. beauty and the Christians' reward after death; the latter represent peace and amity. the imperial crown made of olives means victory. Fifth, angels in paintings always have a pair of wings, which can be traced to scripture where cherubim and seraphim are described as having pairs of wings. Angels' wings often have colors of the rainbow, and the rainbow is compared to God's glory. Sixth, generally artists paint angels' costumes as white, blue, green, gold and purple. Other colors such as red rarely appear. According, to scriptures it is believed that angels should be depicted 'as white as snow'. According to the biblical expressions of angels as lightning, sun or a pillar of fire, angels should be described as creatures of light. Nevertheless being a form of art, religious paintings may differ in their presentation according to an artist's inspiration and intention. Since religious paintings illustrated above were almost all done before the Reformation, symbols of colors used in the Catholic Church will also be mentioned. The white color symbolizes chastity, purity, brightness, delight and divinity. Green represents new birth, eternal life, spiritual revival and the expectance of the grace of God. Blue, the color of sapphires, denotes chastity and truth. Red, the color of rubies, represents divinity, love and religious passion. Violet is the color of dignity, indicating the sovereign, royal or imperial power and the great Sacrifice of Christ. As mentionad above, angels' costumes were expressed in accordance with contemporary patterns or as indicated in the Bible, and accesories and colors correspond with Christian symbols. Therefore these facts should be taken into consideration when it comes to the study of costume history.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.4
• /
• pp.788-818
• /
• 2009

Renewable energy refers to solar energy, biomass energy, hydrogen energy, wind power, fuel cell, coal liquefaction and vaporization, marine energy, waste energy, and liquidity fuel made out of byproduct of geothermal heat, hydrogen and coal; it excludes energy based on coal, oil, nuclear energy and natural gas. Developed countries have recognized the importance of these energies and thus have set the mid to long term plans to develop and commercialize the technology and supported them with drastic political and financial measures. Considering the growing recognition to the field, it is necessary to analysis up-to-now achievement of the government's related projects, in the standards of type of renewable energy, management of sectional goals, and its commercialization. Korean government is chiefly following suit the USA and British policies of developing and distributing renewable energy. However, unlike Japan which is in the lead role in solar rays industry, it still lacks in state-directed support, participation of enterprises and social recognition. The research regarding renewable energy has mainly examinedthe state of supply of each technology and suitability of specific region for applying the technology. The evaluation shows that the research has been focused on supply and demand of renewable as well as general energy and solution for the enhancement of supply capacity in certain area. However, in-depth study for commercialization and the increase of capacity in industry followed by development of the technology is still inadequate. 'Cost-benefit model for each energy source' is used in analysis of technology development of renewable energy and quantitative and macro economical effects of its commercialization in order to foresee following expand in related industries and increase in added value. First, Investment on the renewable energy technology development is in direct proportion both to the product and growth, but product shows slightly higher index under the same amount of R&D investment than growth. It indicates that advance in technology greatly influences the final product, the energy growth. Moreover, while R&D investment on renewable energy product as well as the government funds included in the investment have proportionate influence on the renewable energy growth, private investment in the total amount invested has reciprocal influence. This statistic shows that research and development is mainly driven by government funds rather than private investment. Finally, while R&D investment on renewable energy growth affects proportionately, government funds and private investment shows no direct relations, which indicates that the effects of research and development on renewable energy do not affect government funds or private investment. All of the results signify that although it is important to have government policy in technology development and commercialization, private investment and active participation of enterprises are the key to the success in the industry.

• Korean Journal of Remote Sensing
• /
• v.14 no.4
• /
• pp.353-365
• /
• 1998

Light absorption coefficient per unit mass of particles, i.e., specific absorption coefficient, is important as one of the main parameters in developing algorithms for ocean color remote sensing. Specific absorption coefficient of chlorophyll ($a^*_{ph}$) and suspended sediment ($a^*_{ss}$) were analyzed with a spectrophotometer using the "wet filter technique" and "Kishino method" for the seawater collected in the Yellow and Mediterranean Sea. An improved data-recovery method for the filter technique was also developed using spectrum slopes. This method recovered the baselines of spectrum that were often altered in the original methods. High $a^*_{ph}({lambda})$ values in the oligotrophic Mediterranean Sea and low values in the Yellow Sea were observed, ranging 0.01 to 0.12 $m^2$/mg at the chlorophyll maximum absorption wavelength of 440 nm. The empirical relationship between $a^*_{ph}$(440nm) and chlorophyll concentrations () was found to fit a power function ($a^*_{ph}$=0.039 $^{-0.369}$), which was similar to Bricaud et al. (1995). Absorption specific coefficients for suspended sediment ($a^*_{ss}$) did not show any relationship with concentrations of suspended sediment. However, an average value of $a^*_{ss}$ ranging 0.005 - 0.08 $m^2$/g at 440nm, was comparable to the specific absorption coefficient of soil (loess) measured by Ahn (1990). The morepronounced variability of $a^*_{ss}$ than $a^*_{ph}$ was determined from the variable mixing ratio values between particulate organic matter and mineral. It can also be explained by a wide size-distribution range for SS which were determined by their specific gravity, bottom state, depth and agitation of water mass by wind in the sea surface.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.4
• /
• pp.302-311
• /
• 2018

BACKGROUND: Dithianon (75%) formulation were mixed and sprayed as closely as possible by normal practice on the ten farms located in the Mungeong of South Korea. Patches, cotton gloves, socks, masks, and XAD-2 resin were used for measurement of the potential exposure of dithianon on the applicators wearing standardized whole-body outer and inner dosimeter (WBD). This study has been carried out to determine the dermal and inhalation exposure to dithianon during preparation of spray suspension and application with a power sprayer on a apple orchard. METHODS AND RESULTS: A personal air monitor equipped with an air pump, IOM sampler and cassette, and glass fiber filter was used for inhalation exposure. The field studies were carried out in a apple orchard. The temperature and relative humidity were monitored with a thermometer and a hygrometer. Wind speed was measured using a pocket weather meter. All mean field fortification recoveries were between 85.1% and 99.1% in the level of 100 LOQ (limit of quantification), while the LOQ for dithianon was $0.05{\mu}g/mL$ using HPLC-DAD. The exposure to dithianon on arms of the mixer/loader (0.0794 mg) was higher than other body parts (head, hands, upper body, or legs). The exposure to dithianon on the applicator's legs (3.78 mg) was highest in the body parts. The dermal exposures for mixer/loader and applicator were 10 and 8.10 mg, respectively, from a grape orchard. The inhalation exposure during application was estimated as 0.151 mg, and the ratio of inhalation exposure was 11.2% of the dermal exposure (inner clothes). CONCLUSION: The dermal and inhalation exposure on the applicator appeared to be 4.203 mg - 25.064 mg and $0.529{\mu}g-116.241{\mu}g$, respectively. The total exposures on the agricultural applicators were at the level of 2.596 mg - 25.069 mg to dithianon during treatment for apple orchard. The TER showed 3.421 (>1) when AOEL of dithianon was used as a reference dose for the purpose of risk assessment of the mixing/loading and application.

• Journal of the Daesoon Academy of Sciences
• /
• v.41
• /
• pp.63-131
• /
• 2022

In the context of Daesoon Jinrihoe's The Canonical Scripture, 'Saving Lives' consists of one 44 verse-long chapter. The content covers Kang Jeungsan's authority and foreknowledge, and most of the passages are about the treatment of diseases. Other passages are about relief from natural disasters, the resolution of conflicts in personnel affairs, and wisdom as applied to saving lives. The treatment of diseases focuses on solving the ailments faced by lower classes during that time period. Kang Jeungsan relieved the damage suffered by the people from natural phenomena as caused by the three disasters which resulted from water, fire, and wind. He also worked to solve other difficulties experienced in human society. In addition, the definition of 'wisdom' here is one of being high-seeing and far-thinking in Saving Lives. That is the foundation upon which wisdom can save oneself and others. After comparing each chapter of The Canonical Scripture with the parallel verses from the 6th edition of Daesoon Jeongyeong, the results of this study can be summarized as follows: first, saving lives as performed by Kang Jeungsan became an unprecedented and absolute act of relieving the common people during a time when they were suffering from great harms, hardships, and difficulties in their daily lives during the late Joseon Dynasty. Second, the verses were distributed into seven parts to achieve the purpose indicated by the titles of each section which related to specific powers exhibited by Kang Jeungsan in his interactions with Heaven, Earth and Humanity. Third, the second chapter of 'Saving Lives' includes not only treatment of disease, natural disasters, and hardships, but also relief meant to lessen the burdens people experienced in their daily lives while living within the boundaries of society. This is different from the respective section from the 6th edition of Daesoon Jeongyeong which, by way of contrast, only contained verses concerning the treatment of disease. The contents of 'Saving Lives' in The Canonical Scripture deals with the relief in a wide range of applications and is thereby different from the chapter on healing from the Daesoon Jeongyeong, which merely dealt with the healing of diseases. Therefore, this broader range of meanings can be taken to be a unique feature of The Canonical Scripture.