• Journal of the Korean Society of Tobacco Science
• /
• v.4 no.2
• /
• pp.23-30
• /
• 1982

Six flue- cured cultivars of Nicotiana tabacum L., 15 possible $F_1$ hybrids and $F_2$ Populations among them, and 15 haploid Populations from Fl hybrids and haploids from Parents, were evaluated. Comparisons of the $F_1$, hybrids and $F_2$ Populations with the Parents indicated that heterosis values were small but significant for yield, plant height, days to flower, leaf length and width and total alkaloids from-6.0% to 5.4% in $F_1$ hybrids, and from -3.4% to 3.6% for Plant height days to flower leaves per plant in $F_2$ populations, respectively. There were positive correlations for yield, plant height, days to flower, leaves per plant and total alkaloids between diploid and haploid populations. Increase or decrease ratio of haploids to diploids of total alkaloids was appeared to 30.3%. Those for yield, leaf length and width, value arid reducing sugar were ranged from -4.1% to -27.6%.

• Steel and Composite Structures
• /
• v.33 no.5
• /
• pp.629-640
• /
• 2019

This paper presents a theoretical and finite element (FE) study on the stress intensity factors of double-edged cracked steel beams strengthened with carbon fiber reinforced polymer (CFRP) plates. By simplifying the tension flange of the steel beam using a steel plate in tension, the solutions obtained for the stress intensity factors of the double-edged cracked steel plate strengthened with CFRP plates were used to evaluate those of the steel beam specimens. The correction factor α₁ was modified based on the transformed section method, and an additional correction factor φ was introduced into the expressions. Three-dimensional FE modeling was conducted to calculate the stress intensity factors. Numerous combinations of the specimen geometry, crack length, CFRP thickness and Young's modulus, adhesive thickness and shear modulus were analyzed. The numerical results were used to investigate the variations in the stress intensity factor and the additional correction factor φ. The proposed expressions are a function of applied stress, crack length, the ratio between the crack length and half the width of the tension flange, the stiffness ratio between the CFRP plate and tension flange, adhesive shear modulus and thickness. Finally, the proposed expressions were verified by comparing the theoretical and numerical results.

• Animal Systematics, Evolution and Diversity
• /
• v.32 no.1
• /
• pp.9-20
• /
• 2016

Two new species of poecilostomatoid copepods associated with echiurans are described from an intertidal mud flat in the Yellow Sea. A new genus Echiuricopus is created to accommodate two new species, E. aprilis and E. tenuipes. Major differences between the two new species are displayed in body length, length of caudal ramus seta I, length/width ratio of leg 5 exopod, and armature of the first antennular segment. Echiuricopus n. gen. is closely related to the genus Goidelia Embleton, 1901, but is distinguished from the latter chiefly by having seven caudal setae, a claw-like process on the first antennular segment, one claw-like process on the maxillary syncoxa, the absence of an inner coxal seta on legs 1-4, different armatures on legs 1-4, and an elongate leg 5 exopod.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.150-154
• /
• 2005

The effects of track format on the inter-track crosstalk of holographic ROM system are investigated. To quantify the effect of inter-track crosstalk for various track width and pitch, we defined Signal to Crosstalk noise Ratio(SCR) as a criterion. A numerical simulation is used to obtain the SCR as a function of track widths and pitches. We compared different 4 track widths having 0.3, 0.4, 0.5, and 0.6 ${\mu}m$ considering resolving power of lens and recording density. The simulation results show that the SCRs for each track width are maximized at the track pitch which has the value of 0.72, 0.72, 0.74, and 0.5 ${\mu}m$ respectively. Next, for the three sets with track width-pitch(0.4-0.72, 0.5-0.74, 0.6-0.8 ${\mu}m$) which showed the maximum SCR, we set a minimum pit length so that all sets have a DVD equivalent data density and compared RF signals passed from the slit. The simulation results show that when the track width, pitch, and minimum pit length have 0.5, 0.74, and 0.4 ${\mu}m$ respectively, the difference between the maximum and minimum value of the RF signal showed the greatest value. Also, we investigated RF signal in case of using an amplitude inversion mask, which transmitted regions are inversed against the conventional mask. The simulation results show that the better RF signal may be obtained by using an amplitude inversion mask.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.3
• /
• pp.125-132
• /
• 2007

The purpose of present paper is to investigate a fracture characteristics of the finite-width single-edge-notch(SEN) carbon fiber/epoxy reinforced plastics(CFRP) plates by using an acoustic emission(AE). Uni-directionally oriented 10 plies CFRPs specimen which had different notch length were prepared for monotonic tensile test. Matrix cracking appeared over whole testing process and fiber breaking appeared later on mainly Load distribution factor of the matrix confirmed that increased according as increases of plate width ratio. The amplitude distribution of AE signal from a specimens is an aid to the determination of the different fracture mechanism such as matrix cracking, disbonding, interfacial delamination, fiber pull-out, fiber breaking, and etc. In the result of AE amplitude distribution analysis, matrix cracking, fiber disbonding or interfacial delamination, and fiber pull-out or fiber breaking signal correspond to <65dB, <75dB, and <90dB respectively, Also, changes of the slope of cumulative AE energy represented crazing phenomena or degradation of materials.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.1
• /
• pp.31-35
• /
• 2020

This study demonstrates metal-oxide based memtransistor device and the gate tunable memristive characteristic using atomic layer deposition (ALD) and ZnO n-type oxide semiconductor. We fabricated a memtransistor device having channel width 70 ㎛, channel length 5 ㎛, back gate, using 40 nm thick ZnO thin film, and measured gate-tunable memristive characteristics at each gate voltage (50V, 30V, 10V, 0V, -10V, -30V, -50V) under humidity of 40%, 50%, 60%, and 70% respectively, in order to investigate the relation between a memristive characteristic and hydrogen doping effect on the ZnO memtransistor device. The electron mobility and gate controllability of memtransistor device decreased with an increase of humidity due to increased electron carrier concentration by hydrogen doping effect. The gate-tunable memristive characteristic was observed under humidity of 60% 70%. Resistive switching ratio increased with an increase of humidity while it loses gate controllability. Consequently, we could obtain both gate controllability and the large resistive switching ratio under humidity of 60%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.4
• /
• pp.318-321
• /
• 2006

This study was conducted in 2002 and 2003 to investigate variation on rice quality associated with cooking, and eating qualities under the three different fertilizer levels, none fertilizer level($N-P_2O_{5-}K_2O=0-0-0kg/ha$), ordinary fertilizer level($N-P_2O_{5-}K_2O=1l0-45-57kg/ha$), and heavy fertilizer level($N-P_2O_{5-}K_2O=180-90-110kg/ha$). The eight resistant near-isogenic lines(NILs) for bacterial blight in rice were examined for grain appearances, several physicochemical properties, and palatability value measured by Toyo taste meter. Significant variations in NILs(V), Years(Y), and VxY interaction were recognized in grain length and palatability value under the none fertilizer cultivation, in grain width under the heavy fertilizer cultivation, and in white belly ratio under the three different fertilizer cultivations, respectively. According to increase the fertilizer application rate, variation in grain length and grain width were not significant, but grain thickness was thinner under the ordinary and heavy fertilizer cultivations than under the none fertilizer cultivation. On the other hand, white belly ratio, protein content and Mg/K ratio increased, while amylose content and palatability value lowered. Alkali spreading value lowed under the heavy fertilizer cultivation than under the none and ordinary fertilizer cultivations. Palatability value was significantly low in the line carrying XalJ than in the other lines under the ordinary fertilizer cultivations.

• The Korean Journal of Cytopathology
• /
• v.17 no.2
• /
• pp.116-119
• /
• 2006

The diagnosis of papillary thyroid cancer is generally based on the findings of intranuclear cytoplasmic inclusions and nuclear grooves. Although anisokaryosis and poikilokaryosis, in papillary thyroid cancer, are not distinct when compared to other cancers, cytological examination can provide useful preoperative information. Our study evaluated the diagnostic role of computer-assisted image analysis for the pre-surgical assessment of papillary thyroid carcinoma. Thyroid aspirates from twenty female patients who were histologically confirmed to have both papillary carcinoma and benign nodules were studied. Different populations of 50 benign cells and 50 malignant cells were analyzed. Five morphometric parameters were selected for analysis: nuclear area, perimeter, maximum length, maximum width and intensity standard variation. The values obtained for papillary carcinomas were higher than the surrounding benign nodules as follows: nuclear area 63.5 vs. 36.1 (p=0.000), nuclear perimeter were 29.4 vs. 22.0 (p=0.000), maximum length 9.6 vs. 7.1 (p=0.000), maximum width 8.2 vs. 6.3 (p=0.000), the ratio between maximal length and maximal width 1.16 vs. 1.13 (p=0.000), the standard variation of intensity 14.9 vs. 15.9 (p=0.101) respectively. Therefore, morphometric information can be helpful for the differential cytological diagnosis of papillary thyroid carcinoma.

• Korean Journal of Ichthyology
• /
• v.5 no.1
• /
• pp.85-95
• /
• 1993

Sexual dimorphism of the matured chum salmon, Onchorhynchus keta, have been studied based on biometrical measurements and osteological characters. Male chum salmon has an elongated and hooked upper jaw and canine-like teeth on the upper and lower jaw. The ratios of snout length (SnL) and upper jaw length (UJ) to head length of male were larger than those of the female, whereas eye diameter (ED) and postorbital part of head (CK) of the male were smaller than those of the female's. The ratios of body depth, caudal peduncle depth, anal fin length and adipose fin length to the standard length (PBL) of the male were also larger than those of the female. On sexual dimolrphism was detected in number of fin rays, gill rakers and pyloric ceaca, where as number of lateral line scales and caudal vertebrae of the female was larger than those of the male. Glossohyal and vomer bones has no sexual difference. The ratio of width to length of supraethmoid bone of the male was larger than that of the female. The ratio of frontal part to posterior part of parasphenoid bone of the male was smaller than that of the female.

• Journal of Bio-Environment Control
• /
• v.2 no.1
• /
• pp.46-52
• /
• 1993

The wind pressure distributions were analyzed through the wind tunnel experiment to provide fundamental criteria for the structural design on the three-span arched house according to the wind directions. In order to investigate the wind force distribution, the variation of the wind force coefficients, the mean wind force coefficients, the drag force coefficients and the lift force coefficients were estimated from the experimental data. The results obtained are as follows : 1. The variation of the wind force with the wind directions on the side walls was the greatest at the upwind edge of the walls. The change of pressure from the positive to the negative on the side walls occurred at the wind direction of 30$^{\circ}$ in the first house and 60$^{\circ}$ in the third house. 2. The maximum negative wind force along the length of the roof appeared at the length ratio of 0-0.2, when the wind directions were 90$^{\circ}$ in the first house, 60$^{\circ}$ in the second house and 30$^{\circ}$ in the third house. 3. The maximum negative wind force along the width of the roof appeared at the width ratio and the wind direction of 0.4 and 0$^{\circ}$ in the first house, 0.4-0.6 and 30$^{\circ}$ in the second house and 0.6 and 30$^{\circ}$ in the third house, respectively. 4. The maximum mean positive and negative wind forces occurred at the wind direction of 60$^{\circ}$ and 30$^{\circ}$, respectively, on the side walls of the first house, and the maximum mean negative wind force on the roof occurred at the wind direction of 30$^{\circ}$ in third house. 5. The maximum drag and lift forces occurred at the wind direction of 30$^{\circ}$, and the maximum lift force appeared in the third house. 6. The parts to be considered for the local wind forces were the edges of the walls, the edges of the x-direction of the roofs, and the locations of the width ratio of 0.4 of the first and third house and the center of the width of the second house for the y-direction of the roofs.