• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.521-524
• /
• 2003

In this paper, we propose a face region extraction algorithm using color information and projection. After the extraction of face candidate image using adaptive color information, we project it into vertical direction to estimate the width of the face. Then the redundant parts of the face are efficiently removed by using the estimated face width. And the width information of the face is used at the horizontal projection step to extract the height of the face, and non-face region such as the neck and some background regions, which are represented as the similar skin color, effectively eliminated. From the experiment results for the various images, the proposed algorithm shows more accurate results than the conventional algorithm.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.9
• /
• pp.1022-1031
• /
• 2004

The commutation errors by the filtering process in the large eddy simulation are considered. It is compared the conventional filter with the inhomogeneous filter that is devised to reduce the commutation errors. The weighting factor of the inhomogeneous filter suggested by Vasilyev is adopted. Also, using the optimizing function that estimates test filter width to eliminate the dissipations in the region excluding the vicinity of the wall, the flow patterns are analyzed. It is evaluated in simulations of the turbulent channel flow at Reynolds number of 1020, based on friction velocity and channel half height. Results show that the commutation errors can be significantly reduced by using the inhomogeneous filter and the optimized test filter width.

• Journal of the Korean Society of Tobacco Science
• /
• v.6 no.1
• /
• pp.19-24
• /
• 1984

This study was carried out to find out the variations in Burley 21 variety of Surely tobacco. Jeonjul and nine other selected lines of Burley 21 were evaluated. Plant height and several other characteristics were significantly different among tested lines. Especially, Jangsu-1, the earliest flowered line, flowered 5 to 7 days earlier than other lines and had the smallest length width ratio of the largest leaf. Narrow-leaved type, whose length/width ratio of the largest leaf was above 2, 16, was significantly different in number of leaves and weight per unit leaf area from broad-leaved type whose length/width ratio of the largest leaf being below 1.97. Among tested lines, Jeonju (2) - 2 was the best in major agronomic characteristics, yield and physical properties.

• The Research Journal of the Costume Culture
• /
• v.24 no.5
• /
• pp.617-625
• /
• 2016

In women's clothing the shoulders are distorted and exaggerated. Consequently, the wearers' bodies are transformed and interpreted according to modern standards. We therefore refer to this aspect of women's clothing as the power shoulder. This study aims to analyze the differences in sensibility images on variations in the shoulder shape of power shoulder jackets. Nine samples were examined that involved combinations of three variations of the shoulder height and three variations of the shoulder width. The data was evaluated by 123 fashion design majors. Four factors were selected: attractiveness, personality, activity, and self-respect. Among these factors, attractiveness is the most important. The study results indicated that changes in shoulder height acted as a major effect that had an independent influence on all four factors. In contrast, changes in shoulder width acted as a major effect that had an independent influence on attractiveness, personality, and activity but not on self-respect. It also had an influence on the interaction effect of attractiveness, personality, activity, and self-respect. We anticipate that this study will help individual customers select clothing that is suitable for their preference and body shape because it is now possible for them to estimate images of power shoulder jackets.

• Fisheries and Aquatic Sciences
• /
• v.4 no.1
• /
• pp.1-9
• /
• 2001

This paper describes a procedure extracting feature vector of a target cell more precisely in the case of identifying specified cell. The classification of object type is based on feature vector such as area, complexity, centroid, rotation angle, effective diameter, perimeter, width and height of the object So, the feature vector plays very important role in classifying objects. Because the feature vectors is affected by noises and holes, it is necessary to remove noises contaminated in original image to get feature vector extraction exactly. In this paper, we propose the following method to do to get feature vector extraction exactly. First, by Otsu's optimal threshold selection method and morphological filters such as cleaning, filling and opening filters, we separate objects from background an get rid of isolated particles. After the labeling step by 4-adjacent neighborhood, the labeled image is filtered by the area filter. From this area-filtered image, feature vector such as area, complexity, centroid, rotation angle, effective diameter, the perimeter based on chain code and the width and height based on rotation matrix are extracted. To prove the effectiveness, the proposed method is applied for yeast Zygosaccharomyces rouxn. It is also shown that the experimental results from the proposed method is more efficient in measuring feature vectors than from only Otsu's optimal threshold detection method.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.4
• /
• pp.132-139
• /
• 2002

In GMAW(Gas Metal Arc Welding) processes, bead geometry (penetration, bead width and height) is a criterion to estimate welding quality. Bead geometry is affected by welding current, arc voltage and travel speed, shielding gas, CTWD (contact-tip to workpiece distance) and so on. In this paper, welding process variables were selected as welding current, arc voltage and travel speed. And bead geometry was reasoned from the chosen welding process variables using neuro-fuzzy algorithm. Neural networks was applied to design FL(fuzzy logic). The parameters of input membership functions and those of consequence functions in FL were tuned through the method of learning by backpropagation algorithm. Bead geometry could be reasoned from welding current, arc voltage, travel speed on FL using the results learned by neural networks. On the developed inference system of bead geometry using neuro-furzy algorithm, the inference error percent of bead width was within $\pm$4%, that of bead height was within $\pm$3%, and that of penetration was within $\pm$8%. Neural networks came into effect to find the parameters of input membership functions and those of consequence in FL. Therefore the inference system of welding quality expects to be developed through proposed algorithm.

• Transactions of Materials Processing
• /
• v.20 no.6
• /
• pp.450-455
• /
• 2011

This paper presents an inverse design methodology for the cross section geometry of mold spring with a rectangular cross section as the starting material for a coiling process. The cross-sections of mold springs are universally rectangular, as the parallel sides minimize the possibility of failure under high service loads. Pre-coiled wires are initially designed to have a trapezoidal cross section, which becomes a rectangle by the coiling process. This study demonstrates a numerical exercise to predict changes in the sectional geometry in spring manufacture and to obtain the initial cross section which becomes the exact rectangle desired from the manufacturing process. Finite element analysis was carried out to calculate the sectional changes for various mold springs. Geometrical parameters were the widths at inner and outer radii, the inner and the outer corner radii, and the height. A partial least square regression analysis was carried out to find the main contributing factors for deciding initial design values. The height and the width mainly affected various initial parameters. The initial width at the inner radius was mostly affected by various specification parameters.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.2
• /
• pp.41-47
• /
• 2004

A model test is carried out to investigate flow-induced vibration of a Tainter gate in estuary sulices. The gate model scaled with the ratio of 1:25 is made of acryl panel dimensioned 0.66 m in width, 0.5 m in height in the concrete test flume. Firstly, natural frequencies of the model gate are measured and the results are compared with the numerical results in order to verify the model. In the flow from the gate inside to the gate outside, the amplitudes of the vibration are measured under the different gate opening and downstream water level conditions. Also revised gate models with 20 mm bottom width are tested under the different gate openings and water levels. The results are analyzed to study the characteristics of the Tainter gate vibration in the sea ward flow. These test results are assessed in comparison with the results in the lake ward flow, as a result, presents the dynamic characteristics of the Tainter gate and a basic data for the guide manuals of gate management.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.2
• /
• pp.1-11
• /
• 2004

The purpose of this study was to determine usability as potted flowers and garden plants by controlled plant height using growth retardants. There was no significant difference on the dwarfing effect according to the degree of exposure the sun, but growth was well under full exposure to the sun. The plant height was decreased by application of Cycocel (CCC), Bonzi (paclobutrzol), Ancymidol, and Uniconazole compared to the control group, and treatment of Bonzi $5mg{\cdot}L^{-1}$ was most dwarfing effect for both full sun exposure or 70% controlled shading condition. No consistent different was found in stem diameter, leaf color change, the content of chlorophyll and anthocyanin when the concentration of plant growth retardants was altered. These factors were affected only by light intensity. In comparison to the results of the control group, leaf length, leaf width, plant width and petiole length were all reduced by the application of growth retardants.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.118-126
• /
• 2019

Purpose: This research is to investigate factors that affect dental aesthetics and analyze whether individual perception affects and difference of genders affects the esthetic factors. Materials and methods: Seventy dental students of Chonnam University aged from 25 to 35 years old without periodontal problems were included. Maxillary dental cast for participants were made, and standardized photo was taken with a digital camera. Maximum visual width and the position of gingival zenith of maxillary anterior teeth and maximum height of the maxillary central incisors were measured by a measurement program and the shape of central incisor was categorized. Questionnaire was conducted to evaluate esthetic perception. SPSS program was used to perform statistical analysis. Results: The average visual width ratio of right maxillary anteriors was 1.38:1:0.78 and 1.41:1:0.81 for the left which differ from the golden ratio. The width to height ratio for right and left central incisor was 0.84 and 0.83 respectively. The gingival zenith position was determined to be: mostly, central incisors and canines were located in the distal side, lateral incisors were located in the center. The visual width ratio of right maxillary anterior teeth, ratio of width to height of central incisor, gingival zenith position, crown morphology and amounts of gingival exposure upon smiling were not significantly different between genders, and facial patterns and these dental esthetic factors were not related to aesthetic perception. Conclusion: Even though participants had the visual width ratio of maxillary anteriors or ideal width to ideal height of central incisors that did not agree with the golden ratio, they had high satisfaction for dental esthetics. Esthetic perception depends more on subjective judgements of participants than objective indices.