• 생물환경조절학회지
• /
• 제5권2호
• /
• pp.167-173
• /
• 1996

1. 레이저변위계 및 x-y로봇을 이용하여 계측한 3차원 데이터를 컴퓨터실의 PC/AT에 데이터를 전송하고, Visual Basic(Microsoft)을 이용하여 프로그램화한 화상처리시스템에 의해 머스크멜론 네트의 추출과 그 특징을 확인할 수 있었다. 2. 시용 배양액농도 및 배양액 시용시기를 다르게 함으로써 네트의 높이 및 폭의 차이를 확인하는 것이 가능했다. 3. 머스크멜론 네트의 특징인 높이 및 폭은 시용 배양액농도에 따라서 각각 다르다는 것을 알 수 있었다. 배양액의 농도가 낮을수록 네트의 점유율은 낮아지고, 폭은 넓어지는 경향이 보였다.

• 한국조경학회지
• /
• 제26권2호
• /
• pp.229-239
• /
• 1998

This study investigated ecological and growth characteristics of Sorbus alnifolia for usage of landscape woody plant. The results are obtained as follows: 1) The results of investigate the native Sorbus alnifolia vegetations in Seoul and Kyonggi-do are as follows. From the investigation of canopy and understory, Pinus densiflora, Pinus rigida, Quercus mongolica Quercus dentata and Quercus aliena grow well in natural habitat of Sorbus alnifolia. While Rhod. mucronulatum, Symplocos chinensis, Corylus hetrophylla and alnifolia. While Rhod. mucronulatum, Symplocos chinensis, Corylus hetrophylla and Lindera obtusiloba are commonly found from shrub structure in the habitat. These structure pattern of natural setting would be applied for ecological planting design. 2) The Mt. Rabong area, which locates near a heavy factory district and is considered as environmental dteriorated area has the lowest soil acidity range among three investigated area. Sorbus alnifolia grows in where contains low soil acidity and inorganic nutrient. It might concluded that Sorbus alnifolia be tolerates to air pollution. 3) From the investigation of good specimen tres, the oldest good specimen trees of Sorbus alnifolia have grown in Seoul and Kyonggi-Do for 130 years with 15m height and 12m width. Most of good specimen trees are over 50 years old with 10~15m height, 4.5-12m width. These growth shape and form could be recommend that Sorbus alnifolia would be used as street tree and landscape woody plant in urban park.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.431-434
• /
• 2009

Conceptual study of an open-circuit type low-speed wind tunnel for test of wind turbine blade is conducted. The tunnel is constituted of a settling chamber, a contraction, closed and open test sections, a diffuser, two corners, a cross leg and a fan and motor. For the performance test, the closed test section width of 1.8 m, height of 1.8 m and length of 5.25 m is selected. The open test section with dimension width of 1.8 m, height of 1.8 m and length of 4.14 m is adopted for aeroacoustic test. The contraction ratio is 9 to 1 and maximum speed in the closed test section is 67 m/sec. Input power in the tunnel is about 238 kW and its energy ratio is 3.6. The wind tunnel designed in present study will be an effective tool in research and development of wind turbine.

• Imaging Science in Dentistry
• /
• 제37권1호
• /
• pp.19-26
• /
• 2007

Purpose : To examine whether the maxillofacial skeletal morphology correlates with the condylar position and the anatomic characteristics of articular eminence using measurements of lateral cephalometric radiographs and individualized sagittal temporomandibular joint (TMJ) tomographs. Materials and Methods : I compared measurements of 202 TMJs of 101 orthodontic patients of Kangnung National University Dental Hospital. 1 used Pearson's correlation for comparison of the measuring values in lateral cephalometric radiographs and individualized sagittal TMJ tomographs. Results : Large occlusal plane angle tendency showed decreased width of posterior eminence slope, decreased depth of articular fossa and decreased posterior slope angle of eminence. Large mandibular plane angle tendency showed decreased superior joint space, decreased depth of articular fossa and decreased posterior slope angle of eminence. Large genial angle tendency showed decreased depth of articular fossa, decreased posterior slope angle of eminence and anterior position of condylar head. Large anterior facial height and large posterior facial height tendency showed increased width of posterior slope of eminence, increased depth of articular fossa, increased posterior slope angle of eminence and posterior position of condylar head. Conclusion : Maxillofacial skeletal morphology has correlation with the anatomic characteristics of TMJ. Individualized sagittal TMJ tomographs can provide useful information for anatomical analysis of TMJ.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 추계학술대회 논문집(제1권)
• /
• pp.175-180
• /
• 2006

본 연구는 제주도 서측 해역의 현지 파랑관측 자료를 기초로 해양파의 비선형 특성을 조사한 것으로서, 실제 해역에서의 Freak wave 예보의 토대를 마련하기 위한 기초 연구이다. 관측된 파랑자료의 비선형 특성을 조사하기 위해 파형의 상하 비대칭성, 전후비대칭성, 빈도 분포의 첨예도, 파랑 스펙트럼의 대역폭 파라미터 등을 추출하고 이를 자료를 유의파고, 최대파고 등의 파랑 특성치들과의 상관관계를 분석하였다.

• Wind and Structures
• /
• 제29권2호
• /
• pp.111-127
• /
• 2019

The tapered and set-back type of unconventional designs have been used earlier in many buildings. These shapes are aerodynamically efficient and offer a significant amount of damping against wind-induced forces and excitations. Various studies have been conducted on these shapes earlier. The present study adopts a hybrid approach of turbulence modelling i.e., Detached-eddy Simulation (DES) to investigate the effect of height modified tapered and set-back buildings on aerodynamic forces and their sensitivity towards pressure. The modifications in the flow field around the building models are also investigated and discussed. Three tapering ratios (T.R.=(Bottom width- Top width)/Height) i.e., 5%, 10%, 15% are considered for tapered and set-back buildings. The results show that, mean and RMS along-wind and across-wind forces are reduced significantly for the aerodynamically modified buildings. The extent of reduction in the forces increases as the taper ratio is increased, however, the set-back modifications are more worthwhile than tapered showing greater reduction in the forces. The pressure distribution on the surfaces of the buildings are analyzed and in the last section, the influence of the flow field on the forces is discussed.

• 수산해양기술연구
• /
• 제55권3호
• /
• pp.181-189
• /
• 2019

Discarding juvenile fishes under girth 16 cm nearly equal to inner perimeter of codend mesh size collected by a cover net method in bottom trawl. The body size of the main five species (mackerel, horse mackerel, sea bream, melon seed and black throat seaperch) was measured for their body length, girth, weight, height and width and analyzed size selectivity. Frequency of penetrating fish as retention in a cover net was less than 40% of total number of juvenile discarding fish. The most of body length or girth of five species were significantly different between in the codend and in the cover net. The 50% selection girth in the cover net ranged 8-11 cm were smaller than those in the codend ranged 9-13 cm by the species respectively. The 50% selection body length was significantly related with the ratio of body height (H) by body width (W) both for in the codend or in the cover net while 50% selection girth was not significantly related with H/W. Furthermore 50% selection fish size by fish species between in the codend and in the cover net was not significantly different both in body length or girth. Therefore, the girth selectivity represented possibly as one unique value regarding fish body shape was considered as more useful method for multi-species catch in trawl.

• Imaging Science in Dentistry
• /
• 제51권4호
• /
• pp.407-412
• /
• 2021

Purpose: The purpose of this study was to evaluate the accuracy of virtual 3-dimensional (3D) cephalograms constructed using the principle of biplanar radiography by comparing them with cone-beam computed tomography (CBCT) images. Materials and Methods: Thirty orthodontic patients were enrolled in this study. Frontal and lateral cephalograms were obtained with the use of a head posture aligner and reconstructed into 3D cephalograms using biplanar radiography software. Thirty-four measurements representing the height, width, depth, and oblique distance were computed in 3 dimensions, and compared with the measurements from the 3D images obtained by CBCT, using the paired t-test and Bland-Altman analysis. Results: Comparison of height, width, depth, and oblique measurements showed no statistically significant differences between the measurements obtained from 3D cephalograms and those from CBCT images (P>0.05). Bland-Altman plots also showed high agreement between the 3D cephalograms and CBCT images. Conclusion: Accurate 3D cephalograms can be constructed using the principle of biplanar radiography if frontal and lateral cephalograms can be obtained with a head posture aligner. Three-dimensional cephalograms generated using biplanar radiography can replace CBCT images taken for diagnostic purposes.

• 한국의류학회지
• /
• 제32권3호
• /
• pp.443-453
• /
• 2008

The purpose of this study was to identify the perception between real and ideal body shapes of college students and to investigate the preferred body shape of college students. The research subjects numbered one hundred forty five male and female students, aged 20 to 29, who lived in Gwangju and Chonnam province. The anthropometric data was collected including both direct and indirect measurements. The data was analyzed by mean and standard deviation, t-test, and factor analysis. The results of t-test showed the significant difference($p{\leq}.001$) between real body size and ideal body size. The result showed that male students want to have bigger chest circumference and a taller height than their real body, the research also showed that the female students want to have a narrow bust and hip width along with a taller height than real body. Regarding ideal body shape, male students pursued bigger height and want an inverted-triangle body shape. On the other hand, female students pursued bigger height and slim body shape. This study established the factors(dimension of torso, height, the side shape of torso, and shoulder shape) as the perception between real and ideal body shapes. In terms of real body, the factor analysis shows two contrasting results in which the height is the most important factor for female students, while the torso dimension is the most important factor for male students. In terms of ideal body, the height factor is the most important for both the male and female students.

• 대한토목학회논문집
• /
• 제32권6A호
• /
• pp.337-345
• /
• 2012

본 연구에서는 4대강 사업으로 건설중인 트러스형 리프트의 진동특성을 검토하기 위하여 모형실험이 수행된다. 경간 40 m, 높이 9 m의 트러스형 리프트게이트를 축척 1/25로 모형이론에 따라 아크릴과 납으로 모형을 제작하고, 폭 1.6 m, 길이 25 m, 높이 0.8 m의 수로에서 실험된다. 먼저 모형의 고유진동수가 측정되고 모형을 검증하기 위하여 유한요소 해석결과와 비교된다. 검증된 모형에서 상하류 수위와 문비 개방고에 따른 진동가속도 진폭이 측정된다. 또한 문비의 진동을 줄 일수 있는 하부형상을 검토하기 위하여 문비 최하부의 각도가 $20^{\circ}$, $35^{\circ}$, $50^{\circ}$인 모형을 제작하고 실험결과를 서로 비교한다. 실험 결과는 수문 조작 시 유지관리지침의 기본 자료를 제공하고, 수문의 진동특성과 진동을 줄일 수 있는 수문의 하부형상을 검토한다.