• 한국지반공학회논문집
• /
• 제36권12호
• /
• pp.69-76
• /
• 2020

Back-to-Back 보강토옹벽은 좁은 구간에 양립하는 옹벽의 형식을 가지기 때문에 벽체간의 이격거리에 따라 보강재가 겹치게 되어 보강재 간의 상호작용에 의한 응력 변화와 일체화된 상태에서 전체가 거동하는 문제 등으로 설계단계에서 신중한 접근이 필요하나 현재 국내에 정형화된 설계기준이나 지침이 전무한 상태이다. 본 연구는 이러한 Back-to-Back 보강토옹벽에 대해 옹벽폭 대 높이비(옹벽폭비, Wb/H)에 따른 최적 보강길이비에 대해 고찰하였다. 옹벽폭비는 FHWA 설계기준의 Case II에 해당하는 1.1H, 1.4H, 1.7H, 2.0H, 높이는 일반적으로 가장 많이 적용되고 있는 3.0m, 5.0m, 7.0m, 10.0m를 대상으로 하였으며, 각 조건에서 수치해석을 통해 FHWA 설계기준의 적정성과 옹벽의 높이 및 옹벽폭비에 따른 최적 보강길이비를 제안하였다.

• Journal of Plant Biology
• /
• 제33권1호
• /
• pp.65-72
• /
• 1990

An anatomical study was conducted in order to elucidate the development of primary and secondary ray in Robinia pseudoacacia L. The height of primary ray near pith decreases progressively toward periphery, while the width and number per unit area gradually increase, and then the height, width and number remain somewhat constant. Secondary ray originates from the segmentation of fusiform initials or division of the side or end of fusiform initials at the middle of the first growth layer. And after the height and width of secondary ray increases to some extent, it remains constantly.

• 한국연초학회지
• /
• 제9권2호
• /
• pp.37-47
• /
• 1987

This experiment was conducted to obtain basic information on breeding of flue-cured tabacco varieties . Nine cultivars and partial diallel set of 36 Fl hybrids were grown at Daegu Experiment Station, Korea Ginseng & Tobacco Research Institute in 1983. Partial dominance with high additive gene effect was observed for yield, leaves per plant , days to flower, leaf weight, nicotine and reducing sugar content. partial dominance with additive and dominant gene effect was observed for stalk height , leaf width midrib weight Overdominance with high dominant gene effect was observed for leaf length and midrib width. The directions of dominance were positive for yield, stalk height, leaf weight, leaf length, leaf width, midrib weight, midrib width and reducing sugar content, and the negative was days to flower. The estimates of effective genes were 1 for leaves per plant, 2 for stalk height, days to flower and leaf shape. 3 to 6 for leaf length, leaf width, leaf weight and midrib weight.

• Journal of Biosystems Engineering
• /
• 제42권4호
• /
• pp.258-264
• /
• 2017

Purpose: This study determines the spray characteristics and effective spray width of a tractor-mounted commercial boom sprayer through experiments. Methods: Performance tests were conducted to investigate the spray characteristics of the nozzles on a commercial boom sprayer. The flow rate and spray width of a single nozzle were measured at three levels of spray pressure (0.5, 0.7, and 1.0 MPa) and spray height (15, 30, and 45 cm), respectively. The average value of three repetition tests was used as the representative value. A coefficient of variation (CV) was used as an index of spray uniformity, and the width that guarantees CV values of approximately 15% was determined as the effective spray width. The spray characteristics of the overall boom sprayer were derived analytically by superimposing the spray characteristics of a single nozzle. Results: The test results for a single nozzle showed that the spray width tended to increase as the spray height and spray pressure increased. The effective spray width for a single nozzle was the largest at a spray pressure of 1.0 MPa and spray height of 45 cm, which resulted in a coverage of 84 cm of width. The effective spray width for the entire boom sprayer was also the largest at the spray pressure of 1.0 MPa and spray height of 45 cm, with a magnitude of 424.5 cm. The chemical spraying work in an actual field was simulated by applying a spray width of 400 cm. As a result of the operation for three swaths, the CV value was less than 10% for 1,200 cm of the overall spray width, which meant that uniform application was achieved. Conclusions: It was reasonable to set the effective spray width of the boom sprayer used in this study to 400 cm.

• 한국연초학회지
• /
• 제14권2호
• /
• pp.126-132
• /
• 1992

This experiment was conducted to examine estimates of heterosis, degree of dominance, heritability and phenotypic and genotypic correlation for several mutant characters in flue-cured tobacco variety. Significant heterosis was noted, recording 2.73 and 6.16% for leaf width, -6.86 and -4.72 for leaf shape index, 19.8 and 23.4% for bacterial wilt disease index in Fl an4 F2 generation, respectively, and -1.44 for days to flower in F2 generation. And also leaf width was appeared partial dominance in Fl, and leaf shape index in Fl and F2, Leaf width in F2 was appeared overdominance. Estimated heritabilities in the broad sense ranged from 0.77 to 0.87 for plant and stalk height and days to flower, while those of leaf number, leaf length and width, leaf shape index and bacterial wilt disease index ranged from 0.50 to 0.65. And the heritabilities in the narrow sense were appeared 0.64 and 0.72 for stalk and plant height, respectively, and the others were ranged from 0.32 to 0.47 Positive genotpic correlations appeared among plant height, stalk height, leaf length and leaf width, and between leaf shape index ands day to flower. And negative genotypic correlations appeared between leaf shape index and plant height and stalk height and leaf width, and between bacterial wilt disease index and leaf length.

• 한국유체기계학회 논문집
• /
• 제18권3호
• /
• pp.66-73
• /
• 2015

This paper deals with a parametric study on boot-shaped ribs in a rectangular cooling channel. Numerical analysis of the flow and heat transfer was performed using three-dimensional Reynolds averaged Navier-Stokes equations with the Speziale, Sarkar and Gatski turbulence model. The parametric study was performed for the parameters, tip width-to rib width, tip height-to-rib height, rib height-to-channel height, and rib height-to-width ratios. To assess the cooling performance and friction loss, Numsselt number and friction factor were defined as the performance parameter, respectively. The results showed that the cooling performance and friction loss were seriously affected by the four geometric parameters.

• 생명과학회지
• /
• 제8권4호
• /
• pp.431-436
• /
• 1998

잎 들깨 품종의 선발을 위하여 들깨 91품종의 집단에서 8개 형질에 대한 유전력 및 유전 상관을 추정하여 잎 들깨 양적 형질의 효율적 선발에 대한 유용한 정보를 얻기 위하여 본 연구를 수행하였던 바 그결과를 요약하면 다음과 같다. 유전력은 엽중, 엽면적, 엽장, 엽폭, 초장, 경직경, 마디수가 0.7311~09112로서 높았고, 1주엽수가 0.3241로서 다소 낮았다. 유전 상관은 엽중과 엽면적, 엽중과 엽장, 엽중과 엽폭, 엽중과 초장, 엽중과 경직성, 초장과 경직경, 초장과 마디수, 경직경과 마디수 사이에서 각각 +로 유의하였다. 모든 형질간의 상관관게어세 유전상관의 값이 표현형 상관의 값보다 높았다.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.831-836
• /
• 1989

본 연구에서는 이에 대한 검토를 하기 위하여, Kato의 속도장을 수정하여 수치게산한 폭 증가율과 알루미늄을 재료로 실험한 결과를 비교하고, 마찰비와 판폭비 및 압하율의 변화에 따른 폭 증가율의 영향에 대하여 고찰하였다.

• 패션비즈니스
• /
• 제19권3호
• /
• pp.1-13
• /
• 2015

The purpose of this research is to analyze the morphological relationship between changes hair styles and changes in necklines and collars in 20th century fashion. After selecting the representative plate by each age for this study, the neckline, collar, and formative relevancy of hair style according to it have been analyzed by measuring the neckline, collar, and the width and height item of each hair style. The results of this study show- that the width changes of necklines and collars were mostly proportional in relation to each other, but the width changes of collars and hair styles were inversely proportional. While the amplitude of necklines and collars' width change was very broad, the amplitude of some hair style's height change was very broad. Regarding width, this result had similar results of the researcher's former research, the relation according to the width of necklines, collars and hair style from 16th century to 19th century. However, regarding height, this result was different from the preceding research in that the amplitude of hair style and collars' height change was very broad between 16th and 19th centuries, but the amplitude of neckline's height change is relatively small. This means various heights of necklines appeared in the 20th century, but more various heights of collars were shown between the 16th and 19th centuries. This research hopes to be helpful by predicting trends in fashion, and to be basic resources to understand the systemic relationship of these factors.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.405-410
• /
• 2001

To investigate factors influencing the effective width of. SRC column-steel beam joint resisting the moment as strut, six specimens are designed and tested. Parameters in the test are column width, beam height and horizontal tie within beam depth. From the test, using either wide column width or ties, strength and stiffness of joint were developed. The lower beam height the specimens showed the lower moment.