• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.167-173
• /
• 1996

Laser distance meter and x-y robot employed in the extraction of three dimensional image recognition of muskmelon net and recognized the characteristics of that. All data measured transmitted to the PC/AT in the computer room and programmed with Visual Basic(Microsoft). Alteration of the concentration and application time of nutrient solution modified the net height and width of hydroponically grown muskmelon. Net height and width which are the characteristics of muskmelon depended on the concentration of nutrient solution used. Decreasing with the concentration of nutrient solution lowered the occupying ratio of net and also observed the tendency of widening of muskmelon net.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.2
• /
• pp.229-239
• /
• 1998

This study investigated ecological and growth characteristics of Sorbus alnifolia for usage of landscape woody plant. The results are obtained as follows: 1) The results of investigate the native Sorbus alnifolia vegetations in Seoul and Kyonggi-do are as follows. From the investigation of canopy and understory, Pinus densiflora, Pinus rigida, Quercus mongolica Quercus dentata and Quercus aliena grow well in natural habitat of Sorbus alnifolia. While Rhod. mucronulatum, Symplocos chinensis, Corylus hetrophylla and alnifolia. While Rhod. mucronulatum, Symplocos chinensis, Corylus hetrophylla and Lindera obtusiloba are commonly found from shrub structure in the habitat. These structure pattern of natural setting would be applied for ecological planting design. 2) The Mt. Rabong area, which locates near a heavy factory district and is considered as environmental dteriorated area has the lowest soil acidity range among three investigated area. Sorbus alnifolia grows in where contains low soil acidity and inorganic nutrient. It might concluded that Sorbus alnifolia be tolerates to air pollution. 3) From the investigation of good specimen tres, the oldest good specimen trees of Sorbus alnifolia have grown in Seoul and Kyonggi-Do for 130 years with 15m height and 12m width. Most of good specimen trees are over 50 years old with 10~15m height, 4.5-12m width. These growth shape and form could be recommend that Sorbus alnifolia would be used as street tree and landscape woody plant in urban park.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.431-434
• /
• 2009

Conceptual study of an open-circuit type low-speed wind tunnel for test of wind turbine blade is conducted. The tunnel is constituted of a settling chamber, a contraction, closed and open test sections, a diffuser, two corners, a cross leg and a fan and motor. For the performance test, the closed test section width of 1.8 m, height of 1.8 m and length of 5.25 m is selected. The open test section with dimension width of 1.8 m, height of 1.8 m and length of 4.14 m is adopted for aeroacoustic test. The contraction ratio is 9 to 1 and maximum speed in the closed test section is 67 m/sec. Input power in the tunnel is about 238 kW and its energy ratio is 3.6. The wind tunnel designed in present study will be an effective tool in research and development of wind turbine.

• Imaging Science in Dentistry
• /
• v.37 no.1
• /
• pp.19-26
• /
• 2007

Purpose : To examine whether the maxillofacial skeletal morphology correlates with the condylar position and the anatomic characteristics of articular eminence using measurements of lateral cephalometric radiographs and individualized sagittal temporomandibular joint (TMJ) tomographs. Materials and Methods : I compared measurements of 202 TMJs of 101 orthodontic patients of Kangnung National University Dental Hospital. 1 used Pearson's correlation for comparison of the measuring values in lateral cephalometric radiographs and individualized sagittal TMJ tomographs. Results : Large occlusal plane angle tendency showed decreased width of posterior eminence slope, decreased depth of articular fossa and decreased posterior slope angle of eminence. Large mandibular plane angle tendency showed decreased superior joint space, decreased depth of articular fossa and decreased posterior slope angle of eminence. Large genial angle tendency showed decreased depth of articular fossa, decreased posterior slope angle of eminence and anterior position of condylar head. Large anterior facial height and large posterior facial height tendency showed increased width of posterior slope of eminence, increased depth of articular fossa, increased posterior slope angle of eminence and posterior position of condylar head. Conclusion : Maxillofacial skeletal morphology has correlation with the anatomic characteristics of TMJ. Individualized sagittal TMJ tomographs can provide useful information for anatomical analysis of TMJ.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.175-180
• /
• 2006

This study is carried out the investigation of nonlinear characteristics of the ocean based on the field wave observation data acquired the western sea area in Jeju island during one year. It is aimed to offer the fundamental data for Freak wave forecasting in real sea. For this, the nonlinearity parameters of ocean waves, which are Skewness, Atiltness, Kurtosis and Spectrum band width parameter, are introduced, and the parameters are compared and discussed with some characteristic wave components, ie, significant wave height, maximum wave height, and so on.

• Wind and Structures
• /
• v.29 no.2
• /
• pp.111-127
• /
• 2019

The tapered and set-back type of unconventional designs have been used earlier in many buildings. These shapes are aerodynamically efficient and offer a significant amount of damping against wind-induced forces and excitations. Various studies have been conducted on these shapes earlier. The present study adopts a hybrid approach of turbulence modelling i.e., Detached-eddy Simulation (DES) to investigate the effect of height modified tapered and set-back buildings on aerodynamic forces and their sensitivity towards pressure. The modifications in the flow field around the building models are also investigated and discussed. Three tapering ratios (T.R.=(Bottom width- Top width)/Height) i.e., 5%, 10%, 15% are considered for tapered and set-back buildings. The results show that, mean and RMS along-wind and across-wind forces are reduced significantly for the aerodynamically modified buildings. The extent of reduction in the forces increases as the taper ratio is increased, however, the set-back modifications are more worthwhile than tapered showing greater reduction in the forces. The pressure distribution on the surfaces of the buildings are analyzed and in the last section, the influence of the flow field on the forces is discussed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.3
• /
• pp.181-189
• /
• 2019

Discarding juvenile fishes under girth 16 cm nearly equal to inner perimeter of codend mesh size collected by a cover net method in bottom trawl. The body size of the main five species (mackerel, horse mackerel, sea bream, melon seed and black throat seaperch) was measured for their body length, girth, weight, height and width and analyzed size selectivity. Frequency of penetrating fish as retention in a cover net was less than 40% of total number of juvenile discarding fish. The most of body length or girth of five species were significantly different between in the codend and in the cover net. The 50% selection girth in the cover net ranged 8-11 cm were smaller than those in the codend ranged 9-13 cm by the species respectively. The 50% selection body length was significantly related with the ratio of body height (H) by body width (W) both for in the codend or in the cover net while 50% selection girth was not significantly related with H/W. Furthermore 50% selection fish size by fish species between in the codend and in the cover net was not significantly different both in body length or girth. Therefore, the girth selectivity represented possibly as one unique value regarding fish body shape was considered as more useful method for multi-species catch in trawl.

• Imaging Science in Dentistry
• /
• v.51 no.4
• /
• pp.407-412
• /
• 2021

Purpose: The purpose of this study was to evaluate the accuracy of virtual 3-dimensional (3D) cephalograms constructed using the principle of biplanar radiography by comparing them with cone-beam computed tomography (CBCT) images. Materials and Methods: Thirty orthodontic patients were enrolled in this study. Frontal and lateral cephalograms were obtained with the use of a head posture aligner and reconstructed into 3D cephalograms using biplanar radiography software. Thirty-four measurements representing the height, width, depth, and oblique distance were computed in 3 dimensions, and compared with the measurements from the 3D images obtained by CBCT, using the paired t-test and Bland-Altman analysis. Results: Comparison of height, width, depth, and oblique measurements showed no statistically significant differences between the measurements obtained from 3D cephalograms and those from CBCT images (P>0.05). Bland-Altman plots also showed high agreement between the 3D cephalograms and CBCT images. Conclusion: Accurate 3D cephalograms can be constructed using the principle of biplanar radiography if frontal and lateral cephalograms can be obtained with a head posture aligner. Three-dimensional cephalograms generated using biplanar radiography can replace CBCT images taken for diagnostic purposes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.3
• /
• pp.443-453
• /
• 2008

The purpose of this study was to identify the perception between real and ideal body shapes of college students and to investigate the preferred body shape of college students. The research subjects numbered one hundred forty five male and female students, aged 20 to 29, who lived in Gwangju and Chonnam province. The anthropometric data was collected including both direct and indirect measurements. The data was analyzed by mean and standard deviation, t-test, and factor analysis. The results of t-test showed the significant difference($p{\leq}.001$) between real body size and ideal body size. The result showed that male students want to have bigger chest circumference and a taller height than their real body, the research also showed that the female students want to have a narrow bust and hip width along with a taller height than real body. Regarding ideal body shape, male students pursued bigger height and want an inverted-triangle body shape. On the other hand, female students pursued bigger height and slim body shape. This study established the factors(dimension of torso, height, the side shape of torso, and shoulder shape) as the perception between real and ideal body shapes. In terms of real body, the factor analysis shows two contrasting results in which the height is the most important factor for female students, while the torso dimension is the most important factor for male students. In terms of ideal body, the height factor is the most important for both the male and female students.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6A
• /
• pp.337-345
• /
• 2012

A model test is performed to investigate the dynamic behavior of truss type lift gate which is being constructed by the four major rivers project. The gate dimensioned 40 m in width, 9m in height is scaled with the ratio of 1:25 and is made of acryl panel and supplemented weight by lead in the concrete test flume dimensioned 1.2 m in width, 0.5 m in height and 30m in length. Firstly natural frequencies of the model gate are measured and compared with the numerical results for the calibration. The amplitudes of the vibration are measured under the different gate opening, upstream water level conditions. Also models with bottom angle $20^{\circ}$, $35^{\circ}$ and $50^{\circ}$ are tested and compared to find out a proper shape of bottom structure which minimizes the gate vibration. These test results presents a basic data for the guide manuals of gate management and a design method to reduce the gate vibration of truss type lift gate.