• 대한인간공학회지
• /
• 제11권1호
• /
• pp.13-19
• /
• 1992

This paper deals with the legibility of Korean characters(Hangeul) on car number licence plates. We focus of the height-width ratio as key factor affecting the legibility in experimental procedures. The results of experiments are; i) For vertica characters, the vest height-width ratio was 1:1 for 3 throuth 5 stroke characters, and 4:5 for 6 and 7 stroke characters. ii) For horizontal characters, the best height-width ratio was 1:1 for 3 through 5 stroke charcters, and 5:4 for 6 and 7 stoke characters.

• 한국지반공학회논문집
• /
• 제36권12호
• /
• pp.69-76
• /
• 2020

Back-to-Back 보강토옹벽은 좁은 구간에 양립하는 옹벽의 형식을 가지기 때문에 벽체간의 이격거리에 따라 보강재가 겹치게 되어 보강재 간의 상호작용에 의한 응력 변화와 일체화된 상태에서 전체가 거동하는 문제 등으로 설계단계에서 신중한 접근이 필요하나 현재 국내에 정형화된 설계기준이나 지침이 전무한 상태이다. 본 연구는 이러한 Back-to-Back 보강토옹벽에 대해 옹벽폭 대 높이비(옹벽폭비, Wb/H)에 따른 최적 보강길이비에 대해 고찰하였다. 옹벽폭비는 FHWA 설계기준의 Case II에 해당하는 1.1H, 1.4H, 1.7H, 2.0H, 높이는 일반적으로 가장 많이 적용되고 있는 3.0m, 5.0m, 7.0m, 10.0m를 대상으로 하였으며, 각 조건에서 수치해석을 통해 FHWA 설계기준의 적정성과 옹벽의 높이 및 옹벽폭비에 따른 최적 보강길이비를 제안하였다.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.831-836
• /
• 1989

본 연구에서는 이에 대한 검토를 하기 위하여, Kato의 속도장을 수정하여 수치게산한 폭 증가율과 알루미늄을 재료로 실험한 결과를 비교하고, 마찰비와 판폭비 및 압하율의 변화에 따른 폭 증가율의 영향에 대하여 고찰하였다.

• 대한인간공학회지
• /
• 제6권2호
• /
• pp.9-18
• /
• 1987

The purpose of this study was to find the optimal stroke width-to-height ratio of the Korean character (Hangeul) which yields the greatest reading distance. In this study, black characters on a white background were used under 200 lux conditions in-doors, with the stroke width-to-height ratios ranging from a very thin 1:125 to heavier 1: 8.3. The criterion was the average reading distance at which three subjects (male university students) having normal visual acuity (1.2) could read the characters. Using the data obtained from the experi- ment, we analyzed the relationship between stroke width-to-height ratio and reading distance. In the case of the black characters on a white background, the greatest reading distances occurred with a range from 1:11.4 to 1:17.9.

• 한국의상디자인학회지
• /
• 제7권1호
• /
• pp.33-40
• /
• 2005

Gathering is method used to control fullness along a seam line. The purpose of this study was to investigate the relationship between the quantitative research and qualitative method; the effect of gather and the types of gather drape. The experimental design consists of four factors: (l) three kinds of different weight and thickness of fabrics (2) three kinds of stitch densities (3) five kinds of ratio of gathers (4) three kinds of grain directions. Therefore one hundred thirty five (135) samples were made. And utilized SPSS WIN 10.0 Package in data analysis. The results of this study were as follows; First, after frequency analysis, side height, hem line width, node depth, node count, node width accorded with these result data recording. Second, after correlation analysis, side height related with front statements. Side height and entire visual was negative correlation. Hem line width, node depth, node count with section statements was negative correlation but node width at section statements was positive correlation. Third, after $k^2$ analysis, front picture parts getting excellent evaluation were 1st side height, 3rd hem line width, 4th node depth, 3rd node count, 3rd node width. And section illustration parts getting excellent evaluation were 4th side height, 1st hem line width, 2nd node depth, 3rd node count, 4th node width.

• 설비공학논문집
• /
• 제10권6호
• /
• pp.743-752
• /
• 1998

Experiments were performed to characterize single-phase heat transfer behavior of submerged liquid jet with multiple nozzle normally impinging on the smooth and extended surfaces. Arrays of 9 and 36 nozzles were used, with diameters of 0.5 to 2.0mm providing nozzle area ratio (AR) from 0.05 to 0.2. The square pin fin arrays were chosen as extended surfaces and the effects of geometrical parameters such as fin height, the ratio of fin width to channel width on heat transfer enhancement were examined. Single nozzle characteristics were also evaluated for comparison. The results clearly showed that heat transfer enhancement could be realized by using multiple nozzles at the constant volume flow rate. The average Nusselt number of multiple nozzle impingement on the smooth surface was correlated by the following equation : Nu/$Pr\frac{1}{3}=0.94 Re^{0.56}N^{-0.12}AR^{0.50}$The average heat transfer coefficients of multiple nozzle impingement on the extended surfaces decreased with increasing fin height and the ratio of fin width to channel width. The effectiveness of ex-tended surfaces ranged from 1.5 to 3.5 depending on the fin height, the ratio of fin width to channel width of pin fin arrays, nozzle number and nozzle area ratio.

• 한국산림과학회지
• /
• 제99권2호
• /
• pp.204-212
• /
• 2010

This study was performed in 22 unthinned Larix olgensis plantations in northeast China. Data were collected on 95 sample trees of different canopy positions and the diameter at breast height ($d_{1.3}$) ranged from 5.7 cm to 40.2 cm. The individual tree models for the prediction of vertical distribution of live crown, branch and needle biomass were built. Our study showed that the crown, branch and needle biomass distributions were most in the location of 60% crown length. These results were also parallel to previous crown studies. The cumulative relative biomass of live crown, branch and needle were fitted by the sigmoid shape curve and the fitting results were quite well. Meanwhile, we developed the crown ratio and width models. Tree height was the most important predictor for crown ratio model. A negative competition factor, ccf and bas which reflected the effect of suppression on a tree, reduced the crown ratio estimates. The height-diameter ratio was a significant predictor. The higher the height-diameter ratio, the higher crown ratio is. Diameter at breast height is the strongest predictor in crown width model. The models can be used for the planning of harvesting operations, for the selection of feasible harvesting methods, and for the estimation of nutrient removals of different harvesting practices.

• 설비공학논문집
• /
• 제22권8호
• /
• pp.523-529
• /
• 2010

We investigate two-dimensional laminar flow around rectangular cylinders placed in a uniform stream. Numerical simulations are performed, using finite volume method, in the ranges of $50{\leq}Re{\leq}150$ and $0.1{\leq}W/H{\leq}1.0$, where Re and W/H are the Reynolds number and the width-to-height ratio, respectively. The immersed boundary method is used to handle the rectangular cylinder in a rectangular grid system. Comparisons with the previous results show good agreement in Strouhal number, drag and lift coefficient. The present study reports the detailed information of flow structure at different width-to-height ratios in the ranges of $50{\leq}Re{\leq}150$.

• Geomechanics and Engineering
• /
• 제2권1호
• /
• pp.29-44
• /
• 2010

Vertical vibration tests were conducted using model footings of different size and mass resting on the surface of finite sand layer with different height to width ratios which was underlain by either rigid concrete base, under both dry and saturated condition. The effect of saturation on the damping ratio of finite sand stratum underlain by a rigid base has been verified and compared with the results obtained for the case of finite dry sand stratum underlain by the rigid base. Comparison of results of the experimental study showed that the damping in both the cases is less than 10%. The damping ratio obtained for finite saturated sand stratum is marginally lower than that obtained on finite dry sand stratum at H/B ratio of 0.5. The difference between the two cases becomes significant when the H/B ratio increases to 3.0, indicating the significant influence of soil moisture on damping ratio of foundation- soil system with increase in the thickness of the finite sand stratum. Comparison of the predicted damping ratio for a homogeneous sand stratum with the experimental damping ratio obtained corresponding to the height to width ratio of 3.0 of the finite sand stratum underlain by the rigid concrete base indicates a significant reduction in damping ratio of the foundation-soil system for both the cases.

• 대한치과교정학회지
• /
• 제26권2호
• /
• pp.197-204
• /
• 1996

이 연구는 악안면 영역의 심미적 개선에 필요한 미소의 형태에 대한 기준을 설정하기 위하여 시행하였다. 성인 정상교합자 62명(남자;30명, 평균연령;22.7세, 여자;32명, 평균연령;21.8세)을 대상으로 안정위시와 미소시의 얼굴 정면 사진을 촬영하였고, 미소시 입술의 형태변화, 그리고 입술과 치아와의 관계를 계측, 분석하였다. 이 연구로 부터 얻어진 결과는 다음과 같다. 1. 하순 상연의 만곡과 상악 절단연과의 평행관계인 smile line ratio는 0.09이었고, buccal corridor ratio는 0.63, smile symmetry ratio는 0.96이었다. 2. 미소시 양 구각주 간의 거리는 안정위시 구각부 간 거리의 1.31배였으며, 얼굴 폭의 0.48배였다. 3. 미소시 상순의 수직길이는 안정위시 길이의 0.69배였고, 하순의 수직길이는 안저위시 길이의 0.96배였다. 4. 상악 전치의 노출량은 9.96mm이었고, 상악 전치의 노출은 미소시 상순의 수직길이의 변화율이 었고, 미소시 구각부 길이의 비, buccal corridor ratio등과 관계 깊었다.