• ETRI Journal
• /
• 제39권5호
• /
• pp.756-763
• /
• 2017

A switchable single-wideband (SWB)-to-dual-wideband (DWB) bandpass filter (BPF), which is realized by using lumped switches, is presented in this paper. By alternating the operation modes-ON and OFF-in which the ON mode is achieved by placing the capacitors at the switching spots and the OFF mode is achieved by replacing the capacitors with inductors, DWB-to-SWB BPF can be achieved on the same device. In addition, by changing the capacitor values, the center frequency (CF) of the lower passband of DWB BPF can be easily tuned from 1.69 GHz to 2.22 GHz, while the higher passband stays almost unchanged. As an example, an SWB-to-DWB BPF is designed, fabricated, and measured. This BPF exhibits good performance including wideband, high isolation, compact size, and ability to switch.

• ETRI Journal
• /
• 제36권1호
• /
• pp.163-166
• /
• 2014

A microstrip dual-wideband bandpass filter using a multimode resonator (MMR) is proposed in this letter. The proposed MMR loaded with a T-shaped open-ended stub and a short-ended stub exhibits triple mode characteristics, and a synthesis method is developed to illustrate the wide passband with independently controllable center frequencies and bandwidths. To verify this design methodology, a dual-wideband filter with fractional bandwidths of 19.1% and 27.9% is designed and fabricated. The measured results agree with the simulations.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.431-433
• /
• 2018

본 논문은 광대역 음성의 음질 향상을 위해 시간 영역에서 인공대역 확장 기술을 사용하여 초광대역 음성신호를 출력하여 사용자에게 개선된 음질의 음성을 제공하는 시스템을 제안한다. 시간 영역에서 소스필터 모델에 기반하여 광대역 여기신호 및 LSP를 추출하고, 각각의 대역폭 확장 알고리즘을 적용였고, 초광대역 여기신호 및 LSP를 추론하여 초광대역 음성신호를 합성한다. 주관적인 테스트를 통해 광대역 음성신호보다 초광대역 음성신호의 음질을 더 선호하는 결과를 도출하였다.

• Journal of electromagnetic engineering and science
• /
• 제10권3호
• /
• pp.92-98
• /
• 2010

A new wideband bandstop filter(BSF) with a sharp roll-off characteristic is introduced in a stripline structure in this paper. The BSF consists of two sections: the first is two capacitively coupled $\lambda/4$ short-circuited lines with opposite ground positions, while the second is a capacitively coupled $\lambda/4$ short-circuited line. The BSF provides three transmission zeros within the stopband and better than 22 dB rejection over the whole wireless local area network (WLAN) band from 5.15 to 5.825 GHz. The BSF, cascaded to an U.S. ultra-wideband(UWB: 3.1~10.6 GHz) band-pass filter(BPF), is simulated with HFSS and realized with low-temperature co-fired ceramic(LTCC) green tape with a dielectric constant of 7.8. The measurement results agree well with the HFSS simulation results. The size of the UWB BPF including the BSF is $3{\times}6.3\times0.45\;mm^3$.

• 한국항행학회논문지
• /
• 제21권1호
• /
• pp.84-89
• /
• 2017

본 논문은 CRLH (composite right/left handed) 전송선로 구조의 4중 모드 공진기를 이용하여 높은 대역간 격리도를 갖는 이중-광대역 대역통과 여파기를 설계하는 방법을 제안한다. CRLH 전송선로 구조를 해석하여 4중 모드 공진기의 s-패러미터와 공진 주파수를 유도하였다. 유도된 s-패러미터를 이용하여 새로운 구조의 이중-광대역 대역통과 여파기를 설계, 제작하였다. 측정 결과는 2.8-5.52 GHz, 9.68-12.26 GHz의 이중 통과대역에서 각각 1.08 dB, 2.01 dB의 삽입손실을 갖고, 6.34-8.42 GHz의 중간대역에서 38dB의 대역 격리도를 가져 설계 결과와 잘 일치하는 특성을 보여 주었다.

• 전자공학회논문지
• /
• 제50권11호
• /
• pp.36-40
• /
• 2013

본 논문에서는 덤벨형 결함 접지면 구조를 갖는 복합 좌-우향(CRLH) 전송선로를 이용하여 초광대역 대역통과 여파기를 설계하였다. 결함 접지면 구조와 마이크로스트립 인터디지털 캐패시터를 이용하여 CRLH 전송선로를 구현하고 이것을 이용하여 필터를 설계하였다. CRLH 전송선로는 저역통과와 고역통과 필터의 복합적인 특성을 나타내는데, 그것들의 차단주파수를 잘 조절함으로써 초광대역의 대역통과 필터의 특성을 얻을 수 있다. UWB 필터 특성을 얻기 위해 1, 2, 4, 8 셀을 갖는 CRLH 전송선로에 대해 시물레이션하였고, 본 논문에서는 결과를 검증하기 위해 4 셀 구조의 UWB 필터를 설계 제작하였다. 측정된 결과는 시뮬레이션 결과와 일치하며 5GHz 중심주파수에서 88%의 넓은 대역폭을 갖는다.

• ETRI Journal
• /
• 제43권6호
• /
• pp.957-965
• /
• 2021

A miniaturized wideband band-pass filter with a 3-dB fractional bandwidth of 109.3% (1.53 GHz to 5.22 GHz), high out-of-band attenuation greater than 25 dB, and wide upper stopband up to 14 GHz is proposed. The design consists of a dual-composite right/left handed resonator, embedded open-circuited stub, and a pair of quarter-wavelength short-circuited stubs. These elements are coupled in the near distance to form a miniature filter with a compact occupied area of 0.21 λ_g×0.19 λ_g (≈ 0.013 cm²). The optimized filter has multitransmission poles in the passband, substantially improving the return loss and insertion loss characteristics. The behavior of the passband and stopband is verified against the results of a lumped element model and matrix analysis with a full-wave moment-based analysis and actual measurements. The results of this verification and a comparison with the performance of filters in other references indicate that the proposed filter is very efficient and applicable to compact microwave systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.223-226
• /
• 2004

This paper analyzes the accuracy of free space path loss and matched filter gain approximated by using a passband rectangular pulse for ultra wideband (UWB) radio systems. The example causal signal, a modulated Gaussian pulse with the same center frequency and frequency bandwidth of the passband rectangular pulse, is used to consider the accuracy. The path loss and matched filter gain of the modulated Gaussian pulse are simulated for the reference results. The UWB free space path loss is shown and is compared with that obtained from simulation and Friis' transmission formula. The UWB matched filter gain is shown and compared with simulation results. From the results, we can see that the UWB path loss formula is more accurate than the Friis' transmission formula. The results from the UWB free space path loss and matched filter gain formulas agree with the simulation. Then, these free space path loss and matched filter gain formulas approximated by using a passband rectangular pulse are appropriate for UWB system.

• Journal of electromagnetic engineering and science
• /
• 제11권2호
• /
• pp.83-90
• /
• 2011

In this paper, we present the design method for a low-pass type inverter, which can effectively suppress the spurious response associated with band-pass filters. The inverter has a length of ${\lambda}/4$ and employs not only a stepped-impedance configuration but also asymmetrical and bending structures in order to improve frequency selectivity and compactness. The inverter is applied as an impedance/admittance inverter to the ultra-wideband (UWB) band-pass filter. The UWB band-pass filter configuration is based on a stub band-pass filter consisting of quarter-wavelength impedance inverters and shunt short-circuited stubs ${\lambda}/4$ in length. The asymmetrical stepped-impedance low-pass type inverter improves not only the spurious responses, but also the return loss characteristics associated with a UWB band-pass filter, while a compact size is maintained. The UWB band-pass filter using the proposed inverters is fabricated and tested. The measured results show excellent attenuation characteristics at out-band frequencies, which exceed 18 dB up to 39 GHz. The insertion loss within the pass-band (from 3.1 to 10.6 GHz) is below 1.7 dB, the return loss is below 10 dB, and the group delay is below 1 ns.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.307-308
• /
• 2006

In this paper, we propose an ultra wideband pass filter of ring type with embedded stripline stub. The fractional bandwidth was 98 % at the center frequency of 8 GHz and insertion loss was below 1 dB in passband. Two kinds of dielectric materials with the permittivity of 7.8 and 40, respectively were adopted in evaluating the suggested filter structure. As the permittivity of material became larger, the size of filter smaller as expected without any sacrifice in filter performance. In summary, the suggested filter structure has smaller size due to the embedded stripline stub and can be minimized by adopting dielectric material with higher permittivity again.