• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.219-222
• /
• 2004

There are several factors that disturb an Ultra-Wideband (UWB) radio propagation in an indoor environment such as path loss, shadowing and multipath fading. These factors directly affect the quality of the received signal. In this paper, we investigated the influence of the human body shadowing on UWB propagation based on measured wireless channel in an anechoic chamber. The characteristics of the UWB channel including the transmitter and the receiver antenna effects are acquired over the frequency bandwidth of 3${\sim}$11 GHz. The major factors such as the power delay profile (PDP), the angular power distribution (APD), the pulse distortion and the RMS delay spread caused by the human body shadowing are presented.

• Journal of Advanced Navigation Technology
• /
• v.24 no.2
• /
• pp.121-127
• /
• 2020

In this paper, we propose a dynamic spectrum hole grouping method that changes the grouping range of spectrum hole according to the resources amount required by secondary users in wideband spectrum cognitive wireless networks, and then the proposed method is applied to channel allocation for the secondary user service. The proposed method can improve waste of resources in the existing static spectrum hole grouping in virtue of grouping dynamically as much the predicted spectrum holes resources as secondary users require. Simulation results show that channel allocation method with the proposed dynamic grouping outperforms that with the static grouping method in resources utilization under acceptable secondary user service performance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.18-22
• /
• 2010

In this paper, we propose and analyze the two way ranging (TWR) positioning technique using ultra wideband (UWB) for indoor environment. We employed IEEE 802.15.3a channel as a simulation environment and used to time of arrival (TOA) algorithm. UWB technology in a low transmission power the less the effect of interfering with the existing system, the frequency can be shared so that it can improve the spectral efficiency. And, positioning technique based on UWB with a very narrow pulse width has high accuracy in indoor environment. From the simulation results, it is analyzed the probability of error and positioning performance for channel effects and confirmed usefulness of the proposed scheme.

• Journal of Communications and Networks
• /
• v.14 no.5
• /
• pp.501-509
• /
• 2012

This paper proposes a joint timing synchronization, channel estimation, and data detection for the impulse radio ultra-wideband systems. The proposed timing synchronizer consists of coarse and fine timing estimation. The synchronizer discovers synchronization points in two stages and performs adaptive threshold based on the maximum pulse averaging and maximum (MAX-PA) method for more precise synchronization. Then, iterative channel estimation is performed based on the discovered synchronization points, and data are detected using the selective rake (S-RAKE) detector employing maximal ratio combining. The proposed synchronizer produces two signals-the start signal for channel estimation and the start signal for start frame delimiter (SFD) detection that detects the packet synchronization signal. With the proposed synchronization, channel estimation, and SFD detection, an S-RAKE receiver with binary pulse position modulation binary phase-shift keying modulation was constructed. In addition, an IEEE 802.15.4a channel model was used for performance comparison. The comparison results show that the constructed receiver yields high performance close to perfect synchronization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3A
• /
• pp.205-212
• /
• 2009

A novel channel estimation scheme is proposed for coherent Impulse Radio Ultra Wideband (IR-UWB) system based on IEEE 802.15.4a specification. By extracting and utilizing the information on the frequency synchronization, the proposed channel estimation algorithm improves the receiver performance even under the restricted number of preamble symbols in IEEE 802.15.4a signal format. Simulation results over the IEEE 802.15.4a channel models show the performance gain with the proposed algorithm compared to ordinary channel estimation method.

• Journal of information and communication convergence engineering
• /
• v.2 no.4
• /
• pp.205-208
• /
• 2004

In this paper, we analyzed the performance of SDR-based dual-band CDMA system in wideband multipath channel employing RAKE receiver with MRC diversity. For the simulation of SDR-based dual-band CDMA system, we used digital IF techniques, polyphase analysis filter bank as channelizer. Also, Remez exchange algorithm is employed in the realization of the digital filter in the polyphase analysis filter bank. For performance analysis of dual-band CDMA system, we consider power loss of IF signal after passing through channel and the filter. Also, the performance for different sampling rates is analyzed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.153-158
• /
• 2010

In this paper, we propose and analyze the positioning technique using TH-PPM ultra wideband for indoor environment. We employed AWGN and IEEE 802.15.3a channel as a simulation environment and used to TDOA algorithm. Positioning technique using ultra wideband has high accuracy in indoor environment. From the simulation results, it is analyzed the probability of error and positioning performance for channel effects and confirmed usefulness of the proposed scheme.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.277-280
• /
• 2003

In this paper, we analyze the performance of transmitter and receiver of W-CDMA system using the channel coding and space time code in downlink over ITU-R realistic channel model. We can improve the reliability of communications and increase the data rate by channel coding, and we can get a diversity gain by using the space time code over fading channels. We also apply the RAKE receiver to improve tile performance in multi-Path fading channel environment.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.1
• /
• pp.53-59
• /
• 2007

Wimedia UWB(Ultra-Wideband) platform provides data rates up to 480Mbps in WPAN (Wireless Personal Area Network). Wimedia conformant devices access to the channels through superframe concept for communications. As the channel resource is limited, the optimal channel time required for each device needs to be estimated to share the resource efficiently among the devices. In this paper, we propose a scheme to estimate the required channel time in a super frame to satisfy the QoS of the application on a device. The channel time is estimated from the service rate which is computed from the TSPEC of the application. In the process of the estimation, we take the frame overhead for data transmission as well as the overhead due to the acknowledgement scheme, preamble, and MDSU size into consideration. We also analyze and compare the throughputs for different acknowledgement scheme, preamble, and MDSU size situations. The estimated channel time required for a given service rate is allocated in the unit of MAS(Medium Access Slot).

• ETRI Journal
• /
• v.32 no.1
• /
• pp.11-21
• /
• 2010

A novel ultra-wideband (UWB) transceiver structure is presented to be used in wireless body area networks (WBANs). In the proposed structure, a data channel and a control channel are combined into a single transmission signal. In the signal, a modulation method mixing pulse position modulation and pulse amplitude modulation is proposed. A mathematical framework calculating the power spectrum density of the proposed pulse-based signal evaluates its coexistence with conventional radio systems. The transceiver structure is discussed, and the receiving performance is investigated in the additive white Gaussian noise channel. It is demonstrated that the proposed scheme is easier to match to the UWB emission mask than conventional UWB systems. The proposed scheme achieves the data rate requirement of WBAN; the logical control channel achieves better receiving performance than the logical data channel, which is useful for controlling and maintaining networks. The proposed scheme is also easy to implement.