• Journal of the Korean Society for Nondestructive Testing
• /
• v.7 no.2
• /
• pp.8-15
• /
• 1988

A split-spectrum processing technique for an ultrasonic flaw detection system has been developed, which improves the flaw-to-grain echo ratio in large-grained materials. The enhancement is achieved by partitioning a wide-band received spectrum to obtain frequency shifted bands, which are then processed to suppress the grain echoes with respect to the flaw echo, using a novel signal minimization algorithm. A technique for suppression of grain echoes has also been devised which takes advantage of the fact that the grain echo amplitude changes with the frequency of the incident ultrasound whereas the flaw echo amplitude does not. The combination of this technique and the new flaw detection system greatly improve the capabilities of ultrasonic evaluation of large grain materials.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.4
• /
• pp.281-285
• /
• 2006

In order to widen the tuning range, capacitive degeneration is applied to fully CMOS LC VCOs. Small signal analysis shows that the fixed MOSFET capacitance seen by the LC tank is smaller than that of the traditional LC VCO, resulting in significant extension in the tuning range. This improvement in the tuning range has been verified through measurement of a 10-GHz LC VCO fabricated by $0.18{\mu}m$ CMOS process. The measured tuning range is from 9.8-GHz to 12-GHz, which is better than those of the reported CMOS LC VCOs in 10-GHz band. The measured phase noise is - 103dBc/Hz at 1MHz offset.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.198-202
• /
• 2003

An engineer prefers DIFM receiver which is superior to instantaneous response rather than superheterodyne receiver which has a scan rate in normal wide band receiver designing. But DIFM receiver has weak point in sensitivity and continuous wave signal because of special environments. In this paper we propose the method which is certificated through simulation and prototype testing to improve sensitivity of DIFM receiver. And we analyze the important factors of DIFM receiver from our results.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.259-264
• /
• 2007

According to the development and wide use of broad band internet etc., diverse application technologies using large capacity data such as images have been progressed and in these systems, for accurate acquisition and precise applications of an original signal, the degradation phenomenon generated in the transmission process etc. should be removed. Noises have become known as the main cause of the degradation phenomenon and especially Gaussian noise represents characteristics occurring dependently in image signals and degrades detail information such as edge. In this paper, we removed Gaussian noise using a subdivided nonlinear function according to a threshold value and analyzed the histogram acquired from an edge image to establish a threshold value adaptively, and strengthened detail information of image by using the postprocessing. In simulation results, the proposed method represented excellent performance from comparison of MSE with existing methods.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.387-388
• /
• 2007

IEEE 802.15.4a의 UWB(ultra-wide band) 방식에서 PHY(physical layer) 시스템에 사용되는 FEC(forward error correction)는 RS(Reed-Solomon) 조직적(systematic) 블록 부호와 1/2의 부호율을 가진 조직적 길쌈 부호의 연접 형태로 이루어져 있다.[1] UWB 신호를 이용한 시스템은 연속적이지 않은 임펄스(impulse) 기반의 신호를 사용하기 때문에 정밀도 면에서 뛰어난 장점을 가진다. 본 논문에서는 IEEE P802.15.4a 표준에 명시되어 있는 FEC를 구현하여 AWG(adaptive white gaussian noise) 채널에서의 SNR(signal to noise ratio)에 따른 BER(bit error rate)을 구함으로써 성능을 분석하였다. 실험에서의 정확한 결과를 얻기 위해 15.4a의 UWB에서의 변조 방식에 따라 신호를 변조한 후 잡음을 삽입하여 결과를 도출하였다.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.1
• /
• pp.29-34
• /
• 2009

In this paper, we design RF transceiver architecture and building blocks for impulse radio UWB system. Impulse radio UWB signal occupies the wide frequency band which is very low transmission power. So, it can minimize the interference effect with the other system. Using UWB technology, we obtain position awareness service. Therefore, we describe the RF transceiver architecture of direct conversion receiver and define the requirement of RF transceiver. Moreover, we implement a prototype RF transceiver based on the presented standard and verify a function and performance through the wireless data communication and ranging test.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.93-100
• /
• 2021

Satellite communication for high altitude platform stations (HAPS) and geostationary orbit (GEO) systems suffers from sand and dust (SANDU) storms in desert and arid regions. The focus of this paper is to propose common relations between HAPS and GEO for the atmospheric impairments affecting the satellite communication networks operating above Ku-band crossing the propagation path. A double phase three-dimensional relationship for HAPS and GEO systems is then presented. The comparison model present the analysis of atmospheric attenuation with specific focus on sand and dust based on particular size, visibility, adding gas effects for different frequency, and propagation angle to provide systems' operations with a predicted vision of satellite parameters' values. Thus, the proposed system provides wide range of selecting applicable parameters, under different weather conditions, in order to achieve better SNR for satellite communication.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.139-142
• /
• 2020

NB-IoT(Narrow Band Internet of Things) is an emerging LPWAN(Low Power Wide Area Network) radio technology. NB-IoT has many advantages like low power, low cost, and high coverage. However low bandwidth and low sampling rates also lead to poor positioning accuracy. This paper proposed a solution to optimize positioning accuracy under the OTDOA(Observed Time Difference of Arrival) approach by utilizing MLR(Multiple Linear Regression) models. Through the MLR model to predict the influence degree of weather(temperature, humidity, light intensity and air pressure) on the arrival time of signal transmission to improve the measurement accuracy. The improvement of measurement accuracy can greatly improve IoT applications based on NB-IoT.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1172-1175
• /
• 2011

In this paper, a design method of multi-tone signals for the measurement of adjacent-channel power-ratios on power amplifiers is suggested. Because most tests for power amplifiers in production are performed with single-tone signals, its testing accuracy is not guaranteed as the signal complexity increases. Therefore, the application of multi-tone signals to the testing is suggested by optimized complex coefficients of each tones for the best statistical similarity to the original modulated signal. From the verification, a 802.11a signal was replaced with a multi-tone signal of N=10, with the complex coefficients generated by the suggested method. The resulting measurements on the ACLR of 2.4 GHz power amplifier showed successful accuracy of less than 1 dB discrepancy.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.3
• /
• pp.384-390
• /
• 2008

Chaotic OOK modulation method can be used in LDR(Low Data Rate) UWB systems. In this paper, UWB chaotic-OOK transmitter system is designed and verified using TSMC 0.18 um CMOS process. A transmitter system is composed of Quasi-chaotic signal generator, OOK Modulator, and driving amplifier. The traditional chaotic signal generators using analog feedback method is weak to process variation. In order to solve this problem, a quasi-chaotic signal generator using digital feedback technique is get wide band signal and OOK Modulator using T-type switching structure is used to enhance the isolation characteristic. A driving amplifier has differential to single structure to avoid an external balun for low cost communication. The measured output power spectrum of the transmitter meet the FCC regulation and the result of the modulation test at data rate of 20 Kbps, 200 Kbps, 2 Mbps, and 10 Mbps is conformed to LDR UWB system. It is shown that the transmitter in this paper can be used for the UWB chaotic-OOK system.