• 한국군사과학기술학회지
• /
• 제17권1호
• /
• pp.57-63
• /
• 2014

In this paper, we have proposed a wide band antenna for manpack SDR(Software Defined Radio). The proposed antenna consists of feeding post, flexible gooseneck and two radiating elements composed of a upper and lower radiators. The upper radiator has a longer electrical length than the lower radiator in order to operate in the lower frequency. Also, the resonant frequency and impedance characteristics of the antenna can be adjusted independently for two radiators. Therefore, the proposed antenna can be achieved wide impedance bandwidth by the combination of two independent resonance modes. To analyze the characteristics of the antenna in the design process is employed the equivalent circuit theory and EM(Electro-Magnetic) simulation. The measurement results show that the proposed antenna have the sufficient wide bandwidth, above -3.4dBi of the gain and fairly good radiation pattern over the wide bandwidth.

• 전기의세계
• /
• 제25권6호
• /
• pp.69-73
• /
• 1976

Thd idle channel noise on FDM-microwave communication system is increasing because of the up-grade to wide-band loading. The thermal noise on receiver of microwave radio is measured according to their channel slot frequencies, low, meddle and high slots on the base band, from 60 channels to 960 channels. And suggested a consideration for system engineering, to reduce the thermal noise from radio microwave receivers, so as to improve signal to noise ratio.

• 전자공학회논문지A
• /
• 제29A권10호
• /
• pp.24-28
• /
• 1992

A new design method of microstrip wide band VHF tunable bandpass filters using varacter diodes is presented. In the proposed filter both the input and output ports are coupled through capacitors, and an open micro-strip line is inserted between the coupled line in order to obtain the desired degree of coupling. The optimized filter responseses for the frequency range of 220-404MHz by TOUCH-STONE are compared with the measured ones.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.136-139
• /
• 2001

In this paper, we propese a novel wide band printed monopole antenna called the staircase bow-tie monopole antenna (SBMA). We apply an extraordinarr method for an impedance matching to conventional bow-tie monopoles. So we get the SBMA with a very wide band. Our antenna is smaller than a quarter wavelength in size but provides a 2:1 VSWR bandwidth of about 77.8%. An antenna gain and a radiation pattern are about 1.7dBi and omni-directional at 1.7 GHz, respeotively.

• 한국인터넷방송통신학회논문지
• /
• 제9권2호
• /
• pp.117-122
• /
• 2009

본 논문에서는 다중 안테나 (Multiple-Antenna)를 적용한 초광대역 무선통신 (UWB: Ultra Wide-Band) 시스템에서 이중 이진 터보 부호의 성능을 보인다. 본 논문에서는 PPM-TH (Pulse Position Modulation-Time Hopping) 방식과 PAM-DS (Pulse Amplitude Modulation-Direct Sequence) 방식의 UWB 시스템을 모두 고려하였으며, 다중 안테나 기술로 시공간 블록 부호 (STBC : Space Time Block Code) 송신 다이버시티와 수신 다이버시티 기술을 적용하였다. 그리고 이진 터보 부호에 비해서 부호어 사이의 최소 거리 (Minimum Distance)가 길어서 복호 성능이 좋으며 처리량 (Throughput)이 높아서 복호 처리 시간이 짧은 장점을 가지고 있는 이진 이중 터보 부호를 적용하였다. 본 논문의 결과는 UWB 시스템을 구현하는데 적용될 수 있다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.160-168
• /
• 2001

The RPWM (Random· Pulse Width Modulation) is a switching technique to spread the voltage and current harmonics over a wide frequency area. By using randomly changing switching frequency of the inverter, the power spectrum of the electromagnetic acoustic noise can be spread to the wide-band area. The wide­band noise is much more comfortable and less annoying than the narrow-band one. So, the RPWM has been attracting interest as an excellent method for the reduction of acoustic noise on the inverter drive system. In this paper a new RPPWM (Random Position Space Vector PWM) is proposed and implemented. Each of three phase pulses is located randomly in each switching interval. Along with the randomization of PWM pulses, the space vector modulation is also executed in the C167 micro-controller. The experimental results show that the voltage and current harmonics are spread to a wide band area and that the audible switching noise is reduced by the proposed RPPWM method.

• 한국인터넷방송통신학회논문지
• /
• 제10권3호
• /
• pp.179-184
• /
• 2010

본 논문에서, 실내 다중 경로 무선 채널에서 초광대역(UWB: ultra wide band) 시스템을 위한 레이크 수신기의 성능을 분석한다. 펄스 위치-시간 도약(PPM-TH: pulse position modulation-time hopping) 신호가 고려되었다. 그리고 또한 이상적인 레이크, 선택적 레이크, 부분적 레이크 수신기 등의 세 종류의 레이크 수신기를 고려한다. 실내 채널은 IEEE 802.15.SG3a에서 UWB 채널 모델로 제안한 수정된 SV (Saleh and Valenzuela) 모델로 모델링하였다.

• 한국해양공학회지
• /
• 제30권5호
• /
• pp.341-348
• /
• 2016

The fatigue damage caused by wide band loadings has generally been predicted using fatigue damage models in the frequency domain rather than a rain-flow counting method in the time domain because of its computation cost. This study showed that these fatigue damage models can be simplified in the form of normalized fatigue damage as a function of the S-N curve slope and bandwidth parameters. Based on numerical simulations of various wide band spectra, it was found that fatigue damage models in the form of normalized fatigue damage with one S-N curve slope and two bandwidth parameters( α₁ , α₂ ) provided less reasonable fatigue damage. Therefore, an additional bandwidth parameter needs to be considered based on a sensitivity study using various neural networks, which proved that α_1-5 would be the dominant factor of a fatigue damage model as an additional bandwidth parameter.

• 한국전자파학회논문지
• /
• 제15권8호
• /
• pp.781-787
• /
• 2004

본 논문에서는 셀룰러/PCS/IMT-2000서비스를 동시에 수용할 수 있는 기지국용 다중대역 평판 안테나를 설계 및 제작하였다. 설계된 안테나는 두 개의 유전체 층과 폼 물질로 구성되었고 마이크로스트립 패치의 길이 방향과 너비 방향에 노치가 삽입되었다. 안테나의 광대역 특성을 위해서, 공진 개구면을 가지는 개구면 결합 안테나에 폼 물질을 사용하였으며, 패치의 너비 방향에 노치를 삽입하여 이중 공진 특성을 얻었다. 이를 통해, 광대역 특성을 유지하면서 주파수비( $f_{H/}$ $f_{L}$)가 1:2를 넘는 이중 공진 특성을 얻을 수 있었다. 설계된 안테나의 대역폭은 전압정재파비 1.5 이하로 셀룰러/PCS/IMT-2000 대역을 모두 만족하였고 측정된 안테나의 대역폭은 전압정재파비 1.5 이하로 셀룰러 대역에서 77 MHz, PCS/IMT-2000대역에서 550 MHz이며, 이득은 전 대역에서 약 5.65 dBi에서 7.4 dBi를 얻을 수 있었다.다.다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.235.1-235.1
• /
• 2015

Artificially-engineered materials, whose electromagnetic properties are not available in nature, such as negative reflective index, are called metamaterials (MMs). Although many scientists have investigated MMs for negative-reflective-index properties at the beginning, their interests have been extended to many other fields comprising perfect lenses. Among various kinds of MMs, metamaterial absorbers (MM-As) mimic the blackbody through minimizing transmission and reflection. In order to maximize absorption, the real and the imaginary parts of the permittivity and permeability of MM-As should be adjusted to possess the same impedance as that of free space. We propose a dual-wide-band and polarization-independent MM-A. It is basically a triple-layer structure made of metal/dielectric multilayered truncated cones. The multilayered truncated cones are periodically arranged and play a role of meta-atoms. We realize not only a wide-band absorption, which utilizes the fundamental magnetic resonances, but also another wide-band absorption in the high-frequency range based on the third-harmonic resonances, in both simulation and experiment. In simulation, the absorption bands with absorption higher than 90% are 3.93 - 6.05 GHz and 11.64 - 14.55 GHz, while the experimental absorption bands are in 3.88 - 6.08 GHz and 9.95 - 13.84 GHz. The physical origins of these absorption bands are elucidated. Additionally, it is also polarization-independent because of its circularly symmetric structures. Our design is scalable to smaller size for the infrared and the visible ranges.