• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.600-603
• /
• 2003

VA-LCDs is widely used for recent LCD productions owing to wide viewing angle characteristics with an unusually high contrast ratio. To apply for VA-LCDs, the novel homeotropic alignment materials were synthesized, which have the liquid crystal molecule as a side chain at aromatic diamine in a polyimide structure. These polyimides generated a high pretilt angle $90^{\circ}C$. In this paper, the synthesis and alignment properties of new homeotropic alignment materials will be discussed..

• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.337-341
• /
• 2011

To expand the viewing angle of vertical alignment liquid crystal display (VA-LCD), a wide-band compensation film has been newly developed. VA-LCD needs a retardation film with improved oblique viewing property. The retardation film for VA-LCD has been fabricated by solvent casting and subsequent drawing triacetylcellulose (TAC) containing optical additives. Here, optical birefringence and wavelength dispersion of the retardation film strongly depend on the chemical structures of optical additives. Utilizing quantum mechanical computation, the polarizing anisotropy of retardation film was calculated with respect to additives. It is also realized that the wavelength dispersion of polarizing anisotropy depends on the type and location of substituent to the selected main isomer. When two propionates are substituted to the meta position of the selected main isomer, the wavelength dispersion of polarizing anisotropy shows the most gentle slop, which is well matched with the experimental results. The most gentle slop of wavelength dispersion means that the viewing angle characteristics of LCD are less influenced according to the wavelength of light source of LCD, and it's possible to make better image quality than the present level.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.235-239
• /
• 2001

In this paper, we propose an optical configuration of a reflective AFLC display mode using a half-wave AFLC cell in which inplane tilt angle is $22.5^{\circ}C$. To check the validity of our design, we fabricate a reflective half-wave AFLC cell of which the in-plane tilt angle is $24.9^{\circ}C$, and measure viewing angle and visible spectra characteristics. In the results, the half-wave AFLC cell in the reflective configuration exhibits wide viewing-angle as well as high brightness and contrast. trast.

• Journal of Broadcast Engineering
• /
• v.23 no.2
• /
• pp.235-245
• /
• 2018

Recently panoramic image overcomes camera limited viewing angle and offers wide viewing angle by stitching plenty of images. In this paper, we propose pre-processing and post-processing algorithm which makes speed and accuracy improvements when making panoramic images. In pre-processing, we can get camera sensor information and use three-dimensional rotation angle to find RoI(Region of Interest) image. Finding RoI images can reduce time when extracting feature point. In post-processing, we propose weighted minimal error boundary cut blending algorithm to improve accuracy. This paper explains our algorithm and shows experimental results comparing with existing algorithms.

• Journal of Broadcast Engineering
• /
• v.22 no.4
• /
• pp.473-483
• /
• 2017

Since the advent of 3D and UHD contents, demand for high-quality panoramic images has been increasing. The UWV(Ultra-Wide Viewing) service uses a wider viewing angle than conventional panoramas to provide a lively experience for users and enhance their understanding of the event. In this paper, we propose a spatial adjacency map generation method and an UWV file storage format technology to provide UWV service. The spatial adjacency map measures the similarity between images and generate the position information of the images based on similarity. And the stitching time of the image can be shortened through the generated position information. Through the spatial adjacency map, we generate the large screen content quickly. The UWV file format which is based on ISOBMFF process spatial adjacency map and videos and support random access. In this paper, we design the UWV player to verify the spatial adjacency map and UWV file format and show the result of experiments.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2000.04a
• /
• pp.301-305
• /
• 2000

The present study is part of the Special Research Project for the Construction of a Kansei Sensory Evaluation Model that is currently underway at the University of Tsukuba. In this study, a robot was operated by remote control at an actual art museum as part of a preliminary experiment. The results obtained therefrom were used to consider how people might view exhibits. In a previous study, a standard lens and s wide-angle lens were used to analyze differences in sensory-based movements, while VRML was used to analyze differences in these movements between a virtual and an actual museum. In the present study, the time delay in remote operation, which is currently unavoidable, placed some restrictions on the degree of freedom with which exhibits could be viewed, but it was apparent that sensory evaluation could be possible depending on the search behavior and viewing time. Furthermore specific viewing behaviors using the robot were observed, suggesting that new Kansei sensory perceptions were derived from these behaviors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1054-1057
• /
• 2003

We have studied $90^{\circ}$ twisted nematic (TN) mode driven by fringe electric field, where two polarizers are parallel each other such that the cell shows a black state before a voltage is applied. According to the studies by computer simulation for a LC with negative dielectric anisotropy, the LC twists perpendicular to the horizontal field direction of fringe electric field and the degree of tilt angle is very low, when a voltage is applied. Therefore, the new device exhibits wide viewing angle characteristic due to in-plane switching and high transmittance since the LC director aligns parallel to the polarizer axis.

• Journal of Information Display
• /
• v.3 no.3
• /
• pp.1-11
• /
• 2002

Multi-view function is important to three-dimensional displays without dedicated glasses. It is the reason that the observers earnestly desire to change their positions freely. Multi-viewing is also principal to the reality of three-dimensional (3D) image displayed on the screen. The display of projection type has the advantage that the number of viewing points can be easily increased according to the number of projectors. The authors research on multi-view projection display with hologram screen. Powerful directionality of the diffracted beam from hologram screen is required unlike two-dimensional (2D) display. We developed a new method that all diffracted beams satisfied the same Bragg condition and became sufficiently bright to observe the 3D image under usual indoor light. The principle is based on the essential Bragg diffraction in the three-dimensional space. Owing to such three-dimensional Bragg diffraction we achieved an excellent hologram screen that could be multiple reconstructed in spite of single recording. This hologram screen is able to answer arbitrary numbers of viewing points within wide viewing zone. The distortion of 3D image becomes also sufficiently small with the method of dividing the cross angle between illumination and diffraction beam.

• Current Optics and Photonics
• /
• v.7 no.2
• /
• pp.183-190
• /
• 2023

Three-dimensional (3D) displays provide a significant advantage over traditional 2D displays by offering realistic images, and table-style displays in particular are ideal for generating 3D images that appear to float above a table. These systems are based on multiview displays, and are typically operated using temporal or spatial multiplexing methods to expand the viewing zone (VZ). The VZ is an expanded space that results from merging the sub-viewing zones (SVZs) from which an individual view is made. To increase the viewing angle, many SVZs are usually required. In this paper, we propose a table-ornament electronic holographic display that utilizes 3f parabolic mirrors. In holography, the VZ is not simply expanded but synthesized from SVZs to implement continuous motion parallax. Our proposed system is small enough to be applied as a table ornament, in contrast to traditional tabletop displays that are large and not easily portable. By combining multiview and holographic technologies, our system achieves continuous motion parallax. Specifically, our system projects 340 views using a time-multiplexing method over a range of 240 degrees.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.41-42
• /
• 2001

본 연구에서는 빠른 응답특성과 넓은 시야 각 특성을 갖는 Optically Compensated Bend Mode Liquid Crystal Displays(OCB LCDs)의 전기광학 특성을 계산하였다. 액정의 운동방정식을 시뮬레이션하여 얻은 분자배열 분포로부터 광학적 투과 특성을 계산하였으며, 누설광 차단과 수평 및 수직 방향의 넓은 시야각을 확보하기 위하여 보상필름으로써 Wide View Film을 적용하였다. 이러한 결과를 이축성 필름을 사용한 기존의 OCB LCDs와 비교함으로써 Wide View Film을 적용한 OCB LCDs의 시야의존 특성이 향상됨을 확인하였다.