• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.642-644
• /
• 2003

SAC is a compact electro-optical camera for imaging in visible-NIR spectral ranges. SAC provides highresolution images over the wide geometric and spectral ranges: 10 m ground sample distance (GSD) and 50 km swath width in the spectral ranges of 520 ${\sim}$ 890 nm. SAC is designed to produce high quality images: modulation transfer function (MTF) of more than 15 %; signal-to-noise ratio (SNR) of more than 100. The missions of SAC incorporate various imaging operations: multi-spectral imaging; super swath-width imaging with cameras in parallel; along-track stereo imaging with slanted 2 cameras.

• Bulletin of the Korean Chemical Society
• /
• 제15권1호
• /
• pp.64-74
• /
• 1994

The nonstoichiometric chalcogenides with NaCl-type structure were prepared and the physical and structural properties were studied. The homogeneous range and the structural change were studied based on X-ray powder diffractions using Rietveld-type full-profile fitting technique. Wide homogeneous ranges were observed in Y-S and Y-Se systems, and relatively narrow homogeneous ranges were observed in Yb-S and Yb-Se systems. Both in $Yb_{1-x}S\;and\;Yb_{1-x}Se$, a vacancy ordering transition occurred in (111) plane direction. The ordered superstructure had cubic symmetry(Fm$\bar{3}m) with doubled unit cell "a" parameter compared to the original NaCl-type. The superlattice developed in a continuous second-order transitiion was characterized by the reduced waved vector k= $(a^*+b^*+c^*)/2$. Y-S system had metallic, and YSe, YbSe system had semiconducting properties in their homogeneous ranges. It was observed that the change of electronic transport properties in extended homogeneous range did not depend on the relativeratio of metal to nonmetal, but on the quantities of vacancies.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1619-1626
• /
• 2018

The output power of most facilities for renewable energy generation is unstable due to external environmental conditions. In distributed power systems with two or more sources, a stable output can be achieved with the complementary power supply among the different input sources. In this paper, a double-input DC-DC converter with a wide-input-voltage-range is proposed for renewable energy generation. This converter has the following advantages: the circuit is simple, and the input voltage range is wide and the fault tolerance is excellent. The operation modes and the steady-state analysis are examined. Finally, experimental results are illustrated to verify the correctness of the analysis and the feasibility of the proposed converter.

• Bulletin of the Korean Chemical Society
• /
• 제11권1호
• /
• pp.28-31
• /
• 1990

By using Pak's theory of liquid, a phenomenological theory of viscosity proposed by the authors is applied to liquids under high pressures. The calculated viscosities for various simple substances are in good agreements with those of the observed values over wide pressure ranges.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.975-984
• /
• 2018

This work presents a high efficiency phase shifted full bridge (PSFB) DC-DC converter for use in the second stage of a battery charger for neighborhood electrical vehicle (EV) applications. In the design of the converter, Lithium-ion battery cells are preferred due to their high voltage and current rates, which provide a high power density. This requires wide range output voltage regulation for PSFB converter operation. In addition, the battery charger works with a light load when the battery charge voltage reaches its maximum value. The soft switching of the PSFB converter depends on the dead time optimization and load condition. As a result, the converter has to work with soft switching at a wide range output voltage and under light conditions to reach high efficiency. The operation principles of the PSFB converter for the continuous current mode (CCM) and the discontinuous current mode (DCM) are defined. The performance of the PSFB converter is analyzed in detail based on wide range output voltage and load conditions in terms of high efficiency. In order to validate performance analysis, a prototype is built with 42-54 V / 15 A output values at a 200 kHz switching frequency. The measured maximum efficiency values are obtained as 94.4% and 76.6% at full and at 2% load conditions, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권12호
• /
• pp.5745-5758
• /
• 2017

In this paper, we develop a simple but very effective 4 by 4 Multiple-Input Multiple-Output (MIMO) antenna system for mobile phones consisting of different types of antennas to achieve low correlation property at the frequency ranges of 1710 to 2170 MHz, which covers wide LTE service bands, from band 1 to band 4. The proposed antenna system consists of two pair of antennas. Each pair consists of a planar inverted-F antenna (PIFA) and a coupling antenna which has the property of the loop. The use of two different antenna types of IFA and a coupling achieves high isolation. Proposed antenna system occupies relatively small area and positions at the four corners of a printed circuit board. The gap between the two antennas is 4 mm, in order to realize the good isolation performance. To evaluate the performance of our proposed antenna system, we perform various experiments. The proposed antenna shows a wide operating bandwidth greater than 460 MHz with isolation between the feeding ports higher than 17.5-dB. It also shows that the proposed antenna has low Envelop Correlation Coefficient (ECC) values smaller than 0.08 over the all desired frequency tuning ranges.

• 전기학회논문지P
• /
• 제66권2호
• /
• pp.63-68
• /
• 2017

This paper proposes a new non-isolated DC conversion circuit topology of the voltage source coupled inductor series resonant high-frequency PFM controlled boost chopper type DC-DC power converter using two in one IGBT power module, which can efficiently operate under a principle of zero current soft switching for wide output regulation voltage setting ranges and wide fluctuation of the input DC side voltage as well as the load variation ranges. Its steady state operating principle and the output voltage regulation characteristics in the open-loop-based output voltage control scheme without PI controller loop are described and evaluated from theoretical and experimented viewpoints. Finally, in this paper the computer-aided simulation steady-state analysis and the experimental results are presented in order to prove the effectiveness and the validity of voltage regulation characteristics of the proposed series resonant zero current soft switching boost chopper type DC-DC power converter circuit using IGBTs which is based on simple pulse frequency modulation strategy more than, 20kHz.

• Structural Engineering and Mechanics
• /
• 제89권4호
• /
• pp.363-374
• /
• 2024

Significant changes have been made to estimate the punching shear capacity for edge column-slab joints in the latest editions of most current codes. The revised equations account for axial forces as well as moments conveyed to columns from slabs, which have a substantial impact on the punching resistance of such joints. Many key design parameters, such as reinforcement-ratio, concrete strength, size-effect, and critical-section perimeter, were treated differently or even ignored in various code provisions. Consequently, wide ranges of predicted punching shear strength were detected by applying different code formulas. Therefore, it is essential to assess the various current Codes' design-equations. Because of the similarity in estimated outcomes, only the ACI, EC, and SNiP are used in this study to cover a wide range of estimation ranges from highly conservative to unconservative. This paper is devoted to analyzing the techniques in these code provisions, comparing the estimated punching resistance with available experimental data, and finally developing efficient models predicting the punching capacity of edge column-slab connections. 63 samples from past investigations were chosen for validation. To appropriately predict the punching shear, newly updated equations for ACI and SNiP are provided based on nonlinear regression analysis. The proposed equations'results match the experimental data quite well.

• The Korean Journal of Ecology
• /
• 제27권2호
• /
• pp.79-86
• /
• 2004

An extensive study of the vegetation characteristics of the Hamersley Ranges, a mountainous desert area of north-west Australia, facilitated the comparison of plant species diversity measures with mountainous deserts of other parts of the world. Alpha diversity was defined as the number of species co-existing at local scales and was found to average 18 species per 0.1 ha for the Hamersley Ranges. This was found to be similar to seven other mountainous deserts in North and South America, and southern Africa. Variation in alpha diversity between these deserts was found to considerably lower than within deserts, suggesting that local processes control species richness at local scales. Beta diversity, defined here as turnover in species composition at various spatial scales, can be measured in many ways. For the Hamersley Ranges, Wilson's β ranged from 1.2 to 1.6 for five sites along a topographic gradient, whereas Whittaker's β between different plant communities was found to average 0.93. Comparable data was not found for other desert areas, but comparisons to non-desert areas suggest beta diversity within landscapes is relatively high and is likely to reflect the considerable landform heterogeneity of the Hamersley Ranges. 55∼70% of species were shared between different landscapes of the Hamersley Ranges; comparisons to other regions suggest beta diversity at this scale is relatively low. Gamma diversity, the number of species over large spatial extents, was successfully compared using regression analysis of the log-log species - area relationship. This revealed that the northern Sonoran desert has significantly less species than the Nama (inland) Karoo and Hamersley Ranges over medium spatial extents, but species numbers were similar at a regional scale. Several constraints to the valid comparison of species diversity were identified, including lack of standardisation of sampling techniques, the wide range of measures employed, general lack of published data, and the influence of the various components of spatial scale on most diversity measures. Recommendations on how to improve future comparative work are provided.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.65-71
• /
• 2001

Absorbers such as porous materials and panels have limited absorption characteristics to some frequency bands. There is a need for absorbers with high absorption coefficients in a wide frequency ranges to make good response of room acoustics. This is almost impossible for a single absorption material. Composite absorption structure with cover, porous material. and air gap is known to have those wide frequency characteristics. In this basis. various composite absorption structures are measured and investigated as wide range absorption structures. Measurements are performed according to an international standard, ISO 354. Various surface types such as wooden slits, wood/steel perforated panels are selected as surface covers, and also various porous materials such as polyurethanes, polyesters, and glasswools are used inside the covers. Result shows that the area of void parts of surface materials is critical to high frequency absorptions, and thickness of air gaps are critical factor of the peak absorptions of low frequency bands.