• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.05a
• /
• pp.18-22
• /
• 2003

The sapphire wafers for blue light emitting devices were manufactured by the implementation of the surface machining technology based on micro-tribology. This process has been performed by grinding, lapping and polishing. The surfaces of sapphire wafers were mechanically affected by residual stress and surface default. This mechanical stress and strain can be cured by thermal anneal ing process. The sapphire crystalline wafers were annealed at $1100~1400^{\circ}C$ and then characterized by double crystal X-ray diffraction. The sample showed good quality of crystalline wafer surface wi th full width at hal f maximum of 16 arcsec for the 4-hour heat-treatment at $1300^{\circ}C$.

• Reproductive and Developmental Biology
• /
• v.34 no.3
• /
• pp.229-233
• /
• 2010

Pluripotency and self-renewal capacity of human embryonic stem cells (hESCs) are retained by hESCs related genes as OCT4, SOX2 and NANOG. These genes are shown high expression level in diverse cancer cells and have potential role in the carcinogenesis. On the contrary to this, several genes which are up-regulated in the differentiated hESCs are involved to suppress the carcinogenesis or proliferation of cells. We discovered several genes in immortalized lung fibroblast (WI-38 VA13) by suppression subtractive hybridization. Among them, we focused chromosome 6 open reading frame 62 (C6orf62) which is uncharacterized, mapped to 6p22.3 and generated to Hepatitis B virus X-transactivated proteins (HBVx-transactivated proteins, XTP). Aim of this study was to characterize C6orf62 through analyzing of expression pattern in various cell lines. Expression of C6orf62 was significantly upregulated in diverse normal cell lines than cancer cell lines. And C6orf62 was up-regulated in differentiated hESCs (endothelial cells, neural cells) compared to those of undifferentiated hESCs. Also, C6orf62 in WI-38 cells was highly up-regulated during G1/S transition of the cell cycle. Taken together, C6orf62 is shown expression pattern similar to differentiated hESCs-associated genes which down-regulated in cancer cells. Therefore, we assume that C6orf62 may participate to suppress the proliferation and to induce differentiation through regulating the cell cycle.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.229-235
• /
• 2019

The implementation of an in-band full-duplex wireless communication system is demonstrated in this study. In the analog/RF domain, the self-interference(SI) signal is reduced using a separate antenna for the transmitter and receiver paths, and most of the SI signal is canceled in the digital domain. A software defined radio(SDR) is used to implement the in-band full-duplex wireless communication system. The USRP X310 device uses transmitting and receiving antennas. By adjusting the gain of the transmitting and receiving ends of the SDR device, the magnitude of the SI signal entering the receiving antenna, and the size of the received signal from the outside, are both set to -64 dB. To verify the in-band full-duplex wireless communication performance, the source data is image and orthogonal frequency-division multiplexing is used for modulation. A WiFi standard frame with a carrier frequency of 2.67 GHz and bandwidth of 20 MHz is used. In the received signal, the SI signal is canceled by digital signal processing and the SI signal is attenuated by up to 34 dB. OFDM demodulation was impossible when the SI signal was not removed. However, the bit error rate is reduced to $2.63{\times}10^{-5}$ when the SI signal is attenuated by 34 dB, and no error is detected in the 100 Mbit data output as a result of passing through the Viterbi decoder.

• Korean Journal of Materials Research
• /
• v.4 no.6
• /
• pp.681-686
• /
• 1994

Microwave Detector Using $YBa_{2}Cu_{3}O_{7-x}$, Grain Boundary Junction $YBa_{2}Cu_{3}O_{7-x}$ superconductor thin films were deposited on $LaAIO_{3}$ (100) single crystal substrates using a metal organic chemical vapor deposition (MOCVD) method. These films showed the critical temperature of about 9OK and critical current density of over $10^5/A \textrm{cm}^2$at 77K. These films showed granular structure with 0.5~1.5$\mu \textrm{m}$ grains. Bridge-type junctions, 6$\mu \textrm{m}$ in width and 6pm in length, were fabricated using the photolithography and the Ar ion milling techniques. Current-voltage (I-V) characteristics of these junctions with the microwave irradiation at 77K were studied. The critical current densities decreased as the irradiated microwave power increased. When microwaves were irradiated on the bridge at 77K. the I-V charateristics showed constant voltage stcp(Shapiro steps) at $\Delta$=nho/2e.

• Journal of the Korean Chemical Society
• /
• v.50 no.6
• /
• pp.440-446
• /
• 2006

ZnO nanoparticles were prepared by laser ablation of the ZnO powder dispersed in deionized water and surfactant solutions, and characterized using UV-VIS absorption spectroscopy, X-ray diffractometer and Transmission electron microscopy(TEM). ZnO nanoparticles produced show the pure ZnO crystal state without mixed state with Zn(OH)2 or Zn, and have the band gap energy of 3.35 eV, which is comparable to that of bulk ZnO. While ZnO nanoparticles prepared in SDS solution have the average diameter of 28nm with near spherical shape, those prepared in CTAB solution have the average size of 40 nm with mainly rod-like shape. ZnO colloidal solution of CTAB is more stable than that of SDS. These difference according to surfactants can be explained by difference of electrostatic interaction between surface charge of ZnO and surfactant molecules and by solvation effect in solution.

• Journal of fish pathology
• /
• v.17 no.2
• /
• pp.131-137
• /
• 2004

In the present study, phosphatidylcholine (PC) hydrolyzing enzyme had been isolated from membrane of flounder liver. PC hydrolyzing enzyme solubilized in 1% Triton X -100 from membrane was partially purified by sequential chromatography on Heparin Sepharose CL-6B and Heparin-5PW columns. The products by membrane-bound hydrolyzing enzyme were identified as phosphatidic acid and choline, but in the presence of primary alcohol, phosphatidylethanol was produced at the expense of phosphatidic acid. These data suggest that membrane-bound enzyme may be a PC-phosphoipase D (PLD) type. The enzyme had pH optimum at below 6.0 and temperature optimum at $37^\circ{C}$. The activity of PC-PLD was dose-dependently increased by $Ca^{2+}$ but not $Mg^{2+}$. The activity of PC-PLD was stimulate by PC, PIP2 and PE.

• Korean Journal of Optics and Photonics
• /
• v.11 no.5
• /
• pp.360-364
• /
• 2000

We demonstrate self-starting passIve mode locking of a Cr:LiSAF laser, using a SCIDlconduclor Saturable Absorber Mirror (SESAM), Two high-power red semiconductor lasers (Coherent S-67-500C-100-H) of wavelength 667 nm and maximum power of 500 mW were used as pump lasers, The cavity has 10 cm radius-ai-curvature folding minors, two SF 10 prisms, a 99% reflectivity output coupler and a SESAM at dIe focus of a 10 cm radIus-at-curvature mirror. We used the laser crystal in BrewsterBrewster shape with 1 5% $Cr^{+3}$ ion concentration and the length of 6 mm, An X-shaped resonator was used to compensate the astigmatism induced by tile crystal. The structure of the SESAM cOllSists of 30 pmr of $AlAs/Al_{0.15}Ga_{0.85}As$ layer, wi1l1 a 10 nm GaAs quantum well situated in the topmost layer Output spectra were centeled at 833 nm, with 4 nm spectral bandwidth and pulse width was measured to be 220 fs, Output power of 3 mW is obtained at a pump power of 800 mW. 00 mW.

• Journal of Korean Society of Forest Science
• /
• v.12 no.1
• /
• pp.1-11
• /
• 1971

The present study was carried out in order to investigate seasonal variation in tannin, sugar and protein contents of persimmon fruits, Five varieties of Diospyros kaki Thunberg, i. e, Buyoo, Wolha, Kapjubackmok, Pyungmuhek, Heuksi, and Goyom (Diospyros Lotus Linne var. typica Makino) growing in Jeonbug area were used as the experimental material. The result are summarized as follow; 1. Maximum tannin contents were 4% in Buyoo, 5.46% in Wolha, 5.4l% in Kapjubackmok, 5.1 % in Pyungmuhek, 9.2% in Heuksi, and 26.1% in Goyom, respectively. Therefore, Heuksi and Goyom were considered to be the most useful as tannin material. 2. The most suitable season for tannin extraction was thought to be July with most varieties but it was August with Goyom. 3. The total sugar contents seemed to increse linearly. Linear regressions are as follows. Buyoo ; $\hat{Y}=0.2394x+3.861$ Wolha ; $\hat{Y}=0.3093x-1.148$ Kapjubackmok ; $\hat{Y}=0.3173x-1.3708$ Pyungmuhek ; $\hat{Y}=0.2796x+0.982$ Heuksi ; $\hat{Y}=0.3233x-3.242$ Goyom ; $\hat{Y}=0.1555x-4.780$ 4. Average crude protein contents of fruits through the year were 5.32% in Buyoo, 4.97% in Kapjubackmok, 4.49% in Goyom, 4.11% in Wolha, 4.02% in Heuksi, and 3.6% in Pyungmuhek, respectively. 5. The crude protein contents tend to decrease gradually after fruit setting.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.41-47
• /
• 2018

Purpose : The purpose of this study is to evaluate the usefulness of 6 Dimensional Skull Tracking(6DST) in Cyberknife Stereotactic Body Radiation Therapy(SBRT) for the first and second cervical vertebrae(C1 and C2) metastasis. Methode and material : The Computed Tomography (Lightspeed VCT 64, General Electric Co. Waukesha, WI, USA) was used to acquire the CT images of the 9 patients with cervical vertebrae(C1 and C2) metastasis. Treatment plans for Xsight spine tracking and 6 Dimensional skull tracking were established with planning system (Multiplan system Version 4.6, Accuray, US). The results of XST and 6DST for each patient were analyzed with Microsoft Excel 2010. Result : The Maximum offsets of XST for C1 were 0.9 mm in Y(supero-inferior), 0.9 mm in Z(antero-posterior), 0.7 mm in X(left-right) direction, and rotations were and 1.0 degrees roll, 1.0 degrees pitch and 1.2 degrees yaw. The Maximum offsets of 6DST for C1 were 0.7 mm, 0.7 mm, 0.9 mm and $1.0^{\circ}$, $1.0^{\circ}$, $1.2^{\circ}$ for Y, Z, X and Roll, Pitch, Yaw. The Maximum offsets of XST and 6DST for C2 were 0.7 mm, 0.7 mm, 0.8 mm and $0.9^{\circ}$, $1.0^{\circ}$, $1.8^{\circ}$, and 0.9 mm, 0.7 mm, 0.9 mm and $0.9^{\circ}$, $0.9^{\circ}$, $1.0^{\circ}$ for Y, Z, X and Roll, Pitch, Yaw, respectively. Conclusion : XST and 6DST showed identical results for translations and rotations within the tolerance. It is possible to simplify the treatment time and procedure by using the 6DST. Therefore, 6DST is very useful methode with XST among the various tracking methods in Cyberknife for the patients with C1, C2 vertebral metastasis.

• Journal of the Korean institute of surface engineering
• /
• v.42 no.6
• /
• pp.256-259
• /
• 2009

The wafer surface temperature is an important parameter in the etching process which influences the reaction probabilities of incident species, the vapor pressure of etch products, and the re-deposition of reaction products on feature surfaces. In this study, we investigated all of the effects of substrate temperature on the etch rate of $ZrO_2$ thin film and selectivity of $ZrO_2$ thin film over $SiO_2$ thin film in inductively coupled plasma as functions of $Cl_2$ addition in $BCl_3$/Ar plasma, RF power and dc-bias voltage based on the substrate temperature in range of $10^{\circ}C$ to $80^{\circ}C$. The elements on the surface were analyzed by x-ray photoelectron spectroscopy (XPS).