• Journal of electromagnetic engineering and science
• /
• v.16 no.1
• /
• pp.35-43
• /
• 2016

A compact ultra-wide band antenna with a quadruple band-notched characteristic is proposed. The proposed antenna consists of a slotted trapezoid patch radiator, an inverted U-shaped band stop filter, a pair of C-shaped band stop filters, and a rectangular ground plane. To realize the quadruple notch-band characteristic, a U-shaped slot, a complementary split ring resonator, an inverted U-shaped band stop filter, and two C-shaped band stop filters are utilized in this antenna. The antenna satisfies the -10 dB reflection coefficient bandwidth requirement in the frequency band of 2.88-12.67 GHz, with a band-rejection characteristic in the WiMAX (3.43-3.85 GHz), WLAN (5.26-6.01 GHz), X-band satellite communication (7.05-7.68 GHz), and ITU 8 GHz (8.08-8.87 GHz) signal bands. In addition, the proposed antenna has a compact volume of $30mm{\times}33.5mm{\times}0.8mm$ while maintaining omnidirectional patterns in the H-plane. The experimental and simulated results of the proposed antenna are shown to be in good agreement.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.73.1-73.1
• /
• 2013

전파자료처리를 위한 전파분광기는 전파망원경으로 얻어진 우주전파자료를 최종 처리하는 장비이다. 현재, 전파관측에서는 우주의 미세구조를 밝혀내기 위해 관측자료의 대량화와 고속화가 진행되고 있는데, 이러한 초고속 대용량 자료를 처리하기 위해서 FPGA나 ASIC 등으로 구성된 하드웨어 기반의 전파분광기를 주로 사용하고 있다. 그러나, 하드웨어 기반의 전파분광기는 개발에 시일이 많이 소요되고 고가이며 수정 변경이 쉽지 않다. 한편, 관측자료는 더 대량화되고 고속처리가 필요한 추세로 가고 있다. 이러한 한계를 극복할 수 있는 방법 중 하나가 고속 계산 플랫폼을 기반으로 구현되는 소프트웨어 전파분광기이다. 미국, EU, 일본 등은 이러한 전파분광기 개발을 이미 진행하고 있다. 특히, THz 대역에서 관측시스템 개발을 이제 막 시작하는 우리나라로서는 경쟁력을 갖추려면 외국의 기술의존성을 탈피하고 첨단의 초고속 관측자료처리 기술을 확보해야 한다. 이를 위해 국내의 우수한 IT기술을 전파관측기술에 활용하여 단계적으로 기술을 발전시킬 필요가 있다. 본 연구는 고속 계산 플랫폼을 기반으로 구현되는 소프트웨어 광대역 전파분광기의 기술개발에 관한 것으로 전파관측에 적용할 수 있는 x-엔진 개발과 기술 결합에 중점을 두고자 한다. 이에 소프트웨어 광대역 전파분광기의 기본 설계 및 향후 계획을 소개한다.

• Korean Journal of Cleft Lip And Palate
• /
• v.3 no.2
• /
• pp.51-60
• /
• 2000

Assessment of speech nasality provides important information for the treatment of velopharyngeal incompetence. The perceptual judgement of nasality is still used in assessment of velopharyngeal incompetence, but it should not be the sole criterion for speech nasality. Objective procedures may be used to assess velopharyngeal function, in examples nasometer, aerodynamics, x-ray, electromyography, nasoendoscopy and videofluoroscopy etc, The aim of this study was to obtain comprehensive nasalance data for the Korean children, aged 7 years and to investigate any tonsil differences within that age group. The results were as follow: The nasalance of the children in respect of the tonsil was higher in grade III than grade I in vowels (/i/, /u/, /wi/), plosives (/p'/, /t'/, /k'/), affricatives (/c'/) and fricatives (/s/, /∫/). (p<0.05)

• Journal of Powder Materials
• /
• v.10 no.4
• /
• pp.241-248
• /
• 2003

Biaxially textured Ni tapes were fabricated by a cold working and recrystallization heat treatment processes from powder compact rods. The processing parameters associated with the cube texture formation in Ni tapes were systematically investigated by using X-ray diffraction and pole-figure analysis. The Ni powder used in this study was 5 $\mu$m in size and 99.99% in purity. To find the optimum sintering temperature, tensile tests were performed for Ni rods sintered at various temperatures. The Ni rods sintered at 100$0^{\circ}C$ showed poor elongation and low fracture strength, while the Wi rods sintered above 100$0^{\circ}C$ revealed good mechanical properties. The higher elongation and fracture strength of the Ni rods sintered at higher temperatures than 100$0^{\circ}C$ are attributed to the full densification of the sintered rods. The sintered Ni rods were cold-rolled with 5% reduction to the final thickness of 100 $\mu$m and then annealed for development of rube texture in rolled Ni tapes. The annealed Ni tapes depicted strong cube texture with FWHM(full-width at half-maximum) of in-plane and out-of-plane in the range of 8$^{\circ}$ to 10$^{\circ}$. The NiO deposited on the Ni tapes by MOCVD process showed good epitaxy with FWHM=10$^{\circ}$, which indicates that the Ni tapes can be used as a substrate for YBCO coated conductors.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.309.1-309.1
• /
• 2013

현재까지 CIGS 박막 태양전지는 습식공정인 화학적 용액성장법을 사용하여 형성된 CdS버퍼층을 적용할 경우에 가장 높은 효율을 보이고 있다. 그러나, Cd의 독성 문제와 진공 공정과 호환되지 않는 습식공정 때문에 비독성 건식 공정 버퍼층에 대한 연구가 활발히 진행되고 있다. 습식 공정 CdS 버퍼층을 대체하기 위하여 CdS에 비해 밴드갭이 커서 단파장에서 광 손실이 적은 ZnS 버퍼층을 cracker 황화법을 이용하여 제작하여 CIGS 박막 태양전지에 적용하였다. ZnS 버퍼층을 성장시키기 위해 DC 스퍼터를 사용하여 Zn 박막을 증착한 후, cracker를 사용하여 황화반응을 시켰다. cracker의 cracking zone 온도에 따른 S 반응성을 ZnS 박막의 투과도 변화를 통하여 관찰하였다. 성장된 ZnS 박막은 X-ray diffraction와 Rutherford backscattering spectrometry을 이용하여 박막의 결정성과 조성을 분석하였고, SEM 측정을 통하여 박막의 단면 및 표면 형상을 관찰하였다. 그리고 reflection electron energy loss spectroscopy 분석을 통해 밴드갭을 측정하였다. $700^{\circ}C$의 cracking zone 온도, 3 nm의 Zn 두께, 1 분의 황화공정 조건에서 제작된 ZnS 박막을 CIGS 태양전지의 버퍼층으로 적용한 결과, 반사방지막 없이 12.6%의 변환효율을 얻었다.

• Journal of Advanced Information Technology and Convergence
• /
• v.10 no.1
• /
• pp.37-43
• /
• 2020

This paper presents analysis of passive metal interconnection of the LNA block in CMOS integrated circuit. The performance of circuit is affected by the geometry of RF signal path. To investigate the effect of interconnection lines, a cascode LNA is designed, and circuit simulations with full-wave electromagnetic (EM) simulations are executed for different positions of a component. As the results, the position of an external capacitor (C_ex) changes the parasitic capacitance of electric coupling; the placement of component affects the circuit performance. This analysis of interconnection line is helpful to analyze the amount of electromagnetic coupling between the lines, and useful to choose the signal path in the layout design. The target of this work is the RF LNA enabling the seamless connection of wireless data network and the following standards have to be supported in multi-band (WCDMA: 2.11~ 2.17 GHz, CDMA200 1x : 1.84~1.87 GHz, WiBro : 2.3~2.4GHz) mobile application. This work has been simulated and verified by Cadence spectre RF tool and Ansoft HFSS. And also, this work has been implemented in a 0.13um RF CMOS technology process.

• Progress in Medical Physics
• /
• v.7 no.2
• /
• pp.67-77
• /
• 1996

Purpose: To get a 3-D coordinates of intracranial target position was investicated in axial, sagittal and coronal magnetic resonance imaging with a preliminary experimented target localizer. Material and methods : In preliminal experiments, the localizer is made of engineering plastic to avoid the distrubance of magnetic field during the MR image scan. The MR localizer displayed the 9 points in three different axial tomogram. The bright signal of localizer was obtjained from 0.1～0.3％ of paramagnetic gadolinium/DTPA solution in T1WI or T2WI. In this study, the 3-D position of virtual targets were examined from three different axial MR images and the streotactic position was compared to that of BRW stereotactic system in CT scan with same targets. Results: This study provided the actual target position could be obtained from single scan with MRI localizer which has inverse N-typed 9 bars. This experiment was accomplished with shimming test for detection of image distortion in MR image. However we have not found the image distortion in axial scan. The maximum error of target positions showed 1.0 mm in axial, 1.3 mm for sagittal and 1.7 mm for coronal image, respectivelly. The target localization in MR localizer was investicated with spherical virtual target in skull cadaver. Furthermore, the target position was confirmed with CRW stereotactic system showed a 1.3 mm in discrepancy. Summary : The intracranial target position was determined within 1.7 mm of discrepancy with designed MR localizer. We found the target position from axial image has more small discrepancy than that of sagittal and coronal image.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.3
• /
• pp.143-154
• /
• 2013

Purpose: This study was to find efficacy of integrin alpha2 (${\alpha}_2$) and epidermal growth factor receptor (EGFR) as tumor marker of oral squamous cell carcinoma (SCC) and clarify the selective cell death effect of anti-integrin ${\alpha}_2$ and anti-EGFR on SCC cells, additionally testify conjugated gold nanoparticles (GNP) with air plasma for selective cell death of oral SCC. Methods: Expression of integrin ${\alpha}_2$, EGFR on human SCC cells (SCC25) were examined by western blot. SCC25 cells were treated with anti-integrin ${\alpha}_2$, anti-EGFR and analysed by Hemacolor staining, immunoflorescence staining, FACS flow cytometry. Conjugated GNP with integrin ${\alpha}_2$, EGFR antibody were treated by air plasma on SCC cells. Results: Integrin ${\alpha}_2$ and EGFR were over-expressed on SCC25 cells than normal lung WI-38 cells. The cell viability rate of SCC25 cells treated with anti-integrin ${\alpha}_2$, anti-EGFR was lower than WI-38 cells. The concentration changes of nucleus, releasing cytochrome c and apoptosis inducing factor (AIF) from mitochondria to cytosol were observed. The changes of proteins related with apoptosis were observed. Increase of bax, bcl-xL, activation of caspase-3, -7, -9, and fragmentation of PARP, DFF45 and decrease of lamin A/C in SCC25 cells were observed. In FACS, increase of sub-$G_1$ and S phase was observed. Cell cycle related proteins, Such as cyclin D1, cyclin dependent kinase (CDK) 4, cyclin A, cyclin E, CDK 2, p27 were decreased. After SCC25 cells treated with conjugatged GNP-Integrin ${\alpha}_2$, GNP-EGFR, additionally air plasma, the cell death rate was significantly increased. Conclusion: Integrin ${\alpha}_2$, EGFR were over-expressed in oral SCC cells. Anti-integrin ${\alpha}_2$, anti-EGFR in SCC25 cells induced apoptosis selectively. When GNP-anti integrin ${\alpha}_2$, GNP-anti EGFR were treated with air plasma on SCC25 cells, cancer cells were died more selectively. GNP-anti integrin ${\alpha}_2$, GNP-anti EGFR with air plasma could be treatment choice of oral SCC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11B
• /
• pp.920-929
• /
• 2004

Nowadays, wireless packet data services are provided over cdma2000 1x/1xEV-DO mobile communication network and Portable Internet are being standardized for users demanding higher data rate services. Portable Internet can provide high data rate services, but its service coverage is relatively small. If Portable Internet may be integrated with cdma2000 mobile networks, users are able to choose the best service according to service areas and get seamless services while they are moving around. At the same time, it is cost-effective for operators to construct and maintain the integrated network. For the purpose of effectively integrating Portable Internet into cdma2000 networks, we propose an integration scheme including network architecture, protocol architecture, functions in network elements, interfaces between them, and call-flow procedures. The integration scheme proposed in this paper adopts a tightly-coupled architecture for unified authentication/accounting and seamless services. In addition, the scheme can be implemented without modifying the existing cdma2000 mobile communication networks. It is also simple to develop the dual-mode mobile station. Through the simulation results based on the performance model for handoffs between cdma2000 and Portable Internet, it has teen validated that the proposed scheme diminishes packet losses compared with the loosely-coupled architecture.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.1
• /
• pp.11-14
• /
• 2012

The AlGaN layer has direct wide bandgaps ranging from 3.4 to 6.2 eV. Nowadays, it is becoming more important to fabricate optical devices in an UV region for the many applications. The high quality AlGaN layer is necessary to establish the UV optical devices. However, the growth of AlGaN layer on GaN layer is difficult due to the lattice mismatch and difference thermal expansion coefficient between GaN layer and AlGaN layer. In this paper, we attempted to grow the LED structure on GaN template by mixed-source HVPE method with multi-sliding boat system. We tried to find the optical and lattice transition of active layer by control the Al content in mixed-source. For the growth of epi layer, the HCl and $NH_3$ gas were flowed over the mixed-source and the carrier gas was $N_2$. The temperature of source zone and growth zone was stabled at 900 and $1090^{\circ}C$, respectively. After the growth, we performed the x-ray diffraction (XRD) and electro luminescence (EL) measurement.