• Title/Summary/Keyword: WiMAX system

Search Result 115, Processing Time 0.022 seconds

Specification-based Intrusion Detection System for the Initial Authentication Phase of WiBro (와이브로의 초기인증에 적합한 명세기반의 침입탐지시스템)

  • Lee, Yun-Ho;Lee, Soo-Jin
    • Journal of the Korea Institute of Information Security & Cryptology
    • /
    • v.20 no.2
    • /
    • pp.23-32
    • /
    • 2010
  • WiBro(Wireless Broadband), the service based on IEEE 802.16e(mobile WiMAX) standard, is a wireless broadband Internet technology being developed by the domestic telecommunication industry. In this paper, we analyze security vulnerabilities of WiBro focusing on initial authentication phase and propose a specification-based intrusion detection system that can detect those vulnerabilities. We first derive a specification from the normally operational process of the initial authentication based on PKMv2 EAP-AKA and formalize the derived specification as a state transition diagram. Proposed system executes the intrusion detection based on those specification and state transition diagram. In this paper, to verify the detection capability of proposed system, we construct a test bed network and execute scenario-based test.

Coded performance evaluation of a multi-antenna OFDMA system for reverse-link (다중안테나를 고려한 직교 주파수 분할 다중 접속 방식의 역방향 부호화 성능 검증)

  • Cho, Han-Gyu;Hong, Dae-Sik
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.44 no.4
    • /
    • pp.80-87
    • /
    • 2007
  • In this paper, link-level performance of a OFDMA technique, which has been considered as a standard for 802.16, 802.20, 3G-LTE, WiMax, and WiBro, is evaluated for next-generation wireless communication systems. While many researches have focused on uncoded forward-link performances, this paper provides a coded performance of a reverse-link OFDMA system. Performance degradation due to time offset among reverse-link users and frequency offset during FFT process is investigated. Transmitter and receiver antenna diversity techniques are used to overcome performance degradation. Performance of a OFDMA system is compared with a CDMA system in terms of FER and throughput to emphasize the advantage of OFDMA system for a reverse-link. Finally, under given specification, Eb/No required to achieve the maximum throughput of a reverse-link is proposed considering various coded rates and antenna permutations.

A Joint Frequency Offset Measurement Using Inversely Repeated Training Symbol and Cyclic Prefix (훈련심볼의 위상 반전과 전치순환을 이용한 주파수 오프셋의 계산방법)

  • Kim, Jun-Woo;Park, Youn-Ok;Kim, Whan-Woo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.36 no.7A
    • /
    • pp.627-634
    • /
    • 2011
  • In this paper, a new frequency offset estimation method in OFDM system is suggested. To measure fractional part of frequency offset, the repetition feature of cyclic prefix and that of training sequence is adopted. Both method shows relatively large frequency offset estimation error under low SNR circumstances, but this error can be greatly reduced by joint measurement of cyclic prefix and inversely repeated training symbol such as primary advanced preamble (PA-preamble) of IEEE 802.16m IMT-Advanced WiMax system. In this paper, the performance of suggested frequency offset estimation method is verified in IEEE 802.16m IMT Advanced WiMax system, using its PA-preamble and cyclic prefixes of A-preambles.

A Study on Wireless Data Quality Measurement Method for u-Healthcare Service in WiBro Environment (WiBro 환경에서의 u-Healthcare 서비스를 위한 무선데이터 품질 측정 방안 연구)

  • Shim, Jae-Sung;Yun, Sung-Yeol;Park, Seok-Cheon
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.2
    • /
    • pp.834-841
    • /
    • 2012
  • In order to the mobile service uses the wireless terminal including the development of the wire wireless network and Smart phone, and etc. use including mobile office, which and etc. increases. Because in order that the u-Healthcare service using this appeared before the footlights and the existing quality measurement reference considered the speed, error rate, and etc. just, guarantees the stability of the u-Healthcare, the quality control by service are necessary. In this paper, the quality measurement reference by mobile service considering the radio environment as the method for satisfying the quality guarantee of the u-Healthcare mobile service user and user needs was presented. The WiBro u-Healthcare wireless data service quality based system in the end user perspective was established through the main performance index and entrepreneur case presented in the international standardization institute including 3GPP, WiMAX forum, GSMA, and etc. through the related research and the validity of the quality index establishment was presented according to each service.

A Design and Manufacture of Antenna with DGS(Defected Ground System) for WLAN/WiMAX system (WLAN/WiMAX 시스템 적용을 위한 DGS를 갖는 삼중대역 안테나 설계 및 제작)

  • Seo, Na-Hyun;Rhee, Young-Chul;Yoon, Joong-Han
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.21 no.4
    • /
    • pp.679-687
    • /
    • 2017
  • In this paper, a microstrip-fed triple-band monopole antenna with DGS (Defected Ground Structure) for WLAN/WiMAX applications was proposed. The proposed antenna is based on a microstrip-fed structure, and composed of two strip lines and DGS structure and then designed in order to get triple band characteristics. We carried out simulation about parameters. Adjusted the position and length of the two strips and three slits, we get the optimized parameters. The proposed antenna is fabricated on an FR-4 substrate of which the dielectric constant is 4.4, and its overall size is $34mm(W_1){\times}34mm(L_1){\times}1.6mm(t)$, and its proposed antenna size is $17.0mm(W_6){\times}30.75mm(L_3+L_4+L_9)$. From the fabricated and measured results, return loss of the proposed antenna satisfied return loss -10dB bandwidth 360 MHz (2.335~2.695 GHz), 645 MHz (3.37~4.015 GHz) and 1,770 MHz (5.14~6.91 GHz). And measured results of gain and radiation patterns characteristics displayed for operating bands.

A performance analysis of LDPC decoder for IEEE 802.16e WiMAX System (IEEE 802.16e WiMAX용 LDPC 복호기의 성능분석)

  • Kim, Eun-Suk;Kim, Hae-Ju;Shin, Kyung-Wook
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2010.10a
    • /
    • pp.722-725
    • /
    • 2010
  • In this paper, BER performance and error convergence speed of layered LDPC(Low Density Parity Check) decoder which supports IEEE 802.16e WiMAX standard is analyzed, and optimal design conditions for hardware implementation are derived. A LDPC decoder is modeled and simulated at AWGN channel with QPSK modulation by Matlab. The parity check matrix(PCM) for IEEE 802.16e standard which has block lengths of 576, 1440, 2304 and code rates of 1/2, 2/3A, 2/3B, 3/4A, 3/4B, 5/6 are used. Fixed-point simulation results show that fixed-point bit-width should be more than 8 bits for acceptable decoding performance.

  • PDF

A Study on Security System of 4G Network System (4세대 네트워크 시스템의 보안시스템에 관한 연구)

  • Kim, Hee-Sook
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.16 no.6
    • /
    • pp.15-23
    • /
    • 2016
  • In this paper we presented 4G security models in an open environment. 4G networks have still more security holes and open issues for expert to notice. In here. we show that a number of new security threats to cause unexpected service interruption and disclosure of information will be possible in 4G due mainly to the fact that 4G is an IP-based, heterogeneous network. it tells about the security issues and vulnerabilities present in the above 4G standards.. we try to present several architectures behind 4G infrastructure for example WiMAX and 3GPP LTE architecture. Finally, we point to potential areas for future vulnerabilities and evaluate areas in 4G security which warrant attention. When you make a big dada program, If you use this network architecture then you can improve your learning speed.

Power based scheduling for Collaborative MIMO system (Collaborative MIMO 시스템을 위한 전력기반 스케줄링 방식)

  • Kim, Young-Joon;Lee, Jung-Seung;Baik, Doo-Kwon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.12A
    • /
    • pp.1209-1216
    • /
    • 2008
  • In order to maximize spectrum efficiency and data rate MIMO(Multiple Input Multiple Output) is adopted to wireless system. OFDM-based WiMAX and LTE accommodate MIMO as mandatory technology. STC(Space Time Coding) and SM(Spatial Multiplexing) are used in downlink while in uplink C-MIMO(Collaborative MIMO) is used to improve data throughput. In this paper conventional pairing schemes, RPS(Random Pairing Scheduling) and DPS(Determinant Pairing Scheduling) are analyzed. From the analysis the performance of DPS algorithm is better than that of RPS because DPS measures orthogonal factor between paired users. However, there are potential problems such as hardware complexity and performance. To overcome the issues Power-Based Scheduling(PBS) algorithm is proposed for C-MIMO. PBS can provide higher performance compared to RPS and dramatically reduce hardware complexity compared to DPS

Utilization of AeroMACS Infrastructure for Airports and Airlines (공항 및 항공사를 위한 AeroMACS 인프라 활용 연구)

  • Lim, In-Kyu;Kang, Ja-Young
    • Journal of Advanced Navigation Technology
    • /
    • v.23 no.5
    • /
    • pp.373-379
    • /
    • 2019
  • AeroMACS spectrum is a national resource internationally allocated by ITU at WRC-07. AeroMACS is an airport broadband mobile communication infrastructure based on WiMAX-based IEEE 802.16e that enables real-time video, graphics, voice, and high-speed data transmission. With the approval of ICAO's development technology standards in 2008, 50 airports in 11 countries have already completed the testing of D-TAXI or A-SMGCS technology using the AeroMACS infrastructure in 2019, starting in the United States in 2009. With many advantages in safety and convenience in terrestrial telecommunications operations, the system is becoming an area of performance improvement for airport operations in accordance with ICAO's ASBU plan. This paper examines the current status of domestic development of AeroMACS and lists service areas applicable to airlines and operators. It also seeks to promote safe and efficient next-generation airport mobile communication system services by presenting feasible partners management in the mobile area and use of aircraft communication systems for active technology development.

Cost-Effective Deployment and Operation of the IEEE802.16j based WiBro MMR Network (IEEE802.16j 기반 WiBro MMR 네트워크의 효율적 구축 및 운용에 관한 연구)

  • Ryu, Seungwan;Choi, Go-Bong;Myung, Kwangsik;Park, Seikwon;Cho, Choong-Ho;Lee, Hyong-Woo
    • Journal of Korean Institute of Industrial Engineers
    • /
    • v.34 no.2
    • /
    • pp.223-234
    • /
    • 2008
  • Mobile multi-hop relaying (MMR) technology is being considered as a promising solution capable to enhance coverage, user throughput, and system capacity of the current wired backbone dependent wireless access networks. Since the relaying nodes do not need a wired backbone access, MMR technology offers easy and low-cost deployment, flexible cell planning, and adaptive traffic handling performance. In this paper, we investigate performance and cost effectiveness of the MMR technology deployment in the IEEE802.16j based WiBro/WiMAX systems. We first introduce standardization activities and research issues of MMR WiBro/ WiMAX systems. Since the coverage extension problem may occur in metropolitan areas as well as suburban or rural areas where user density is relatively low or moderate, we introduce several MMR topologies and analyze cost-effectiveness of MMR based coverage extension with respect to the user traffic density. Then, we argue cost effect on MMR technology deployment and throughput performance, Finally, we introduce further study issues including sectorized base station based MMR deployment approaches and the single and multi-frame structure MMR approaches.