• Journal of Communications and Networks
• /
• v.9 no.2
• /
• pp.141-149
• /
• 2007

Multiple-input multiple-output (MIMO) transmit pre-coding/beamforming can significantly improve system spectral efficiency. However, several obstacles prevent precoding from wide deployment in early wireless networks: The significant feedback overhead, performance degradation due to feedback delay, and the large storage requirement at the mobile devices. In this paper, we propose a precoding method that addresses these issues. In this approach, only 3 or 6 bits feedback is needed to select a precoding matrix from a codebook. There are fifteen codebooks, each corresponding to a unique combination of antenna configuration (up to 4 antennas) and codebook size. Small codebooks are prestored and large codebooks are efficiently computed from the prestored codebook, modified Hochwald method and Householder reflection. Finally, the feedback delay is compensated by channel prediction. The scheme is validated by simulations and we have observed significant gains comparing to space-time coding and antenna selection. This solution was adopted as a part of the IEEE 802.16e specification in 2005.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.966-968
• /
• 2009

In IEEE 802.16 system, it is important to allocate resources appropriately in order to the efficient utilization of resources among a variety of real-time and non real-time packets. although a lot of the real-time and non real-time packet scheduling schemes in OFDMA system have been proposed, it need to be modified to apply to IEEE 802.16 system. Since IEEE 802.16 supports five kinds of service classes, it is important to take QoS constraints of these classes into consideration. In this paper, we propose a efficient scheduling scheme to support various services by considering the QoS constraints of each classes.

• Journal of Information Processing Systems
• /
• v.15 no.3
• /
• pp.670-681
• /
• 2019

Orthogonal frequency division multiplexing (OFDM) is a system which is used to encode data using multiple carriers instead of the traditional single carrier system. This method improves the spectral efficiency (optimum use of bandwidth). It also lessens the effect of fading and intersymbol interference (ISI). In 1995, digital audio broadcast (DAB) adopted OFDM as the first standard using OFDM. Later in 1997, it was adopted for digital video broadcast (DVB). Currently, it has been adopted for WiMAX and LTE standards. In this project, a Verilog design is employed to implement an OFDM transmitter (DAC block) and receiver (FFT and ADC block). Generally, OFDM uses FFT and IFFT for modulation and demodulation. In this paper, 16-point FFT decimation-in-frequency (DIF) with the radix-2 algorithm and direct summation method have been analyzed. ADC and DAC in OFDM are used for conversion of the signal from analog to digital or vice-versa has also been analyzed. All the designs are simulated using Verilog on ModelSim simulator. The result generated from the FFT block after Verilog simulation has also been verified with MATLAB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4B
• /
• pp.319-328
• /
• 2009

IEEE 802.16e standard defines different Sleep Mode Operations according to kind of services which aims at saving energy for MS efficiently. The previous study of Sleep Mode Operation is limited for single service environment, real sleep interval is decreased because different Sleep Mode Operations are applied at once when MS is on multi service. The proposed Enhanced Sleep Mode Operation increasing real sleep interval of this paper guarantees QoS(Quality of Services) which is same as standard, minimizes energy consumption when different Sleep Mode Operations are applied at once. Therefore Enhanced Sleep Mode Operation of this paper will be useful in case of increase battery life time as well as guaranteeing QoS for MS in IEEE 802.16 system.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.43-47
• /
• 2009

Purpose: The menstrual cycle of normal premenopausal patients was divide into menstrual flow phase, proliferative phase, ovulatory phase, secretory phase. The aim of this study was to ovarian and endometrial $^{18}F$-FDG uptake during the menstrual cycle in normal premenopausal patients. Materials and Methods: We identified 200 incidental $^{18}F$-FDG uptake in the ovary. The patient fasted at least 6 hours before receiving an intravenous injection of 370-592 MBq (10-16mCi) of $^{18}F$-FDG. Scanning from the base of the skull though the mid thigh was performed using the Discovery Ste PET/CT system (GE Healthcare, Milwaukee, WI, USA). Ovarian and endometrial $^{18}F$-FDG uptake (expressed as standardized uptake value) was measured on PET/CT image. Results: Two peaks of increased endometrial $^{18}F$-FDG uptake were identified during the menstrual cycle. The $SUV_{avg}$ and $SUV_{max}$ was $2.89{\pm}1.04$ and $3.17{\pm}1.59$ in menstruating patients, $2.4{\pm}0.88$ and $2.98{\pm}1.14$ in proliferative phase patients, $3.59{\pm}1.76$ and $3.17{\pm}1.67$ in ovulatory phase patients, $2.58{\pm}1.39$ and $3.1{\pm}1.8$ in secretory phase patients. Conclusions: Increased ovarian and endometrial $^{18}F$-FDG uptake could be found the time of menstrual flow and ovulatory phase of menstrual cycle. Increased uptake in endometrial adjacent to a cervical tumor does not necessarily reflect endometrial tumor invasion. Since increased uptake was dependent on the menstrual cycle, it can be avoided by scheduling PET/CT just after menstruation. Non-menstrual-related endometrial uptake may be instrumental in establishing a diagnosis in a premenopaual patient.

• ETRI Journal
• /
• v.34 no.5
• /
• pp.674-683
• /
• 2012

We propose a slot antenna consisting of a rectangular slot on the ground plane, fed by a microstrip line with a rectangular-ring-shaped tuning stub that can be deployed in ultra-wideband (UWB) communication systems to avoid interference with wireless local area network (WLAN) communication. Our antenna can achieve a single band-notched property from the 5 GHz frequency to the 6 GHz frequency owing to a controllable band notch that uses L- and J-shaped parasitic elements. The antenna characteristics can be modified to tune the band-notched property (4 GHz to 5 GHz or 6 GHz to 7 GHz) and the bandwidth of the band notch (1 GHz to 2 GHz). Furthermore, the shifted notch with enhanced width of the band notch from 1 GHz to 1.5 GHz is described in this paper. The UWB slot antenna and L- and J-shaped parasitic elements also provide the band-rejection function for reference in the WiMAX (3.5 GHz) and WLAN (5 GHz to 6 GHz) regions of the spectrum. Experiment results evidence the return loss performance, radiation patterns, and antenna gains at different operational frequencies.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.638-648
• /
• 2013

Together with the GPS-based approach, geo-location through mobile communication networks is a key technology for location-based service. To save the cost, most geo-location system is implemented on the existed network service, which has a cellular structure. Still, multilateration is limited in cellular structure because it is difficult for the mobile terminal to acquire distance measurements from multiple base stations. This low hearability in the receiver is caused by co-channel interference and multipath environment. Therefore, hearability enhancement is necessary for multilateration under multipath and interference environment. Former time domain based hearability methods were designed for real signals. However, orthogonal frequency division multiplexing (OFDM) signal, which its usage has been increased in digital wireless communication, is a complex signal. Thus, different hearability enhancement method is needed for OFDM signals. This paper proposes a hearability enhancement method for forward-link multilateration using OFDM signals, which employ interference cancellation and multipath mitigation. A novel interference cancellation and multipath mitigation strategy for complex-valued OFDM signals is presented that has an iterative structure. Simulation results show that the proposed multilateration method provides the user's position with an accuracy of less than 80m through the mobile WiMAX cellular network in multipath environment.

• Journal of Korea Multimedia Society
• /
• v.14 no.3
• /
• pp.433-439
• /
• 2011

The positioning system based on wireless AP collects AP information distributed in the real world, stores it into database, and measures the position objects by comparing with searched AP information. The existing fingerprinting method is a probabilistic modeling method that acquires much of the data collected from one location upon database composition, and stores the average of the data for the sake of use it in positioning objects. Using the average value, however, may cause the probability of errors Such errors are fatal weaknesses for services based on the accurate position. This paper described the characteristics and problems of the previously used wireless AP positioning system, and proposed a method of using the AP DB and an MSS mechanism for outdoor positioning in order to solve the aforementioned problems. And the results obtained from experimental tests showed that the proposed method achieved very low error rate(27%) compared with the existing method.

• Journal of Communications and Networks
• /
• v.13 no.1
• /
• pp.32-42
• /
• 2011

Frequency reuse among relay stations (RSs) in a down-link access zone is widely adopted for throughput enhancement in IEEE 802.16j relay networks. Since the areas covered by the RSs or the base station (BS) may overlap, some mobile stations (MSs) at the border between two neighboring transmitting stations (RS or BS) using an identical frequency band may suffer severe interference or outage. This co-channel interference within the cell degrades the quality of service (QoS) fairness among the MSs as well as the system throughput. Exclusive use of a frequency band division (orthogonal resource allocation) among RSs can solve this problem but would cause degradation of the system throughput. We observe a trade-off between system throughput and QoS fairness in the previously reported schemes based on frequency reuse. In this paper, we propose a new frequency reuse scheme that achieves high system throughput with a high fairness level in QoS, positioning our scheme far above the trade-off curve formed by previous schemes. We claim that our scheme is beneficial for applications in which a high QoS level is required even for the MSs at the border. Exploiting the features of a directional antenna in the BS, we create a new zone in the frame structure. In the new zone, the RSs can serve the subordinate MSs at the border and prone to interference. In a 3-RS topology, where the RSs are located at points $120^{\circ}$ apart from one another, the throughput and Jain fairness index are 10.64 Mbps and 0.62, respectively. On the other hand, the throughput for the previously reported overlapped and orthogonal allocation schemes is 8.22 Mbps (fairness: 0.48) and 3.99 Mbps (fairness: 0.80), respectively. For a 6-RS topology, our scheme achieves a throughput of 18.38 Mbps with a fairness of 0.68; however, previous schemes with frequency reuse factors of 1, 2, 3, and 6 achieve a throughput of 15.24 Mbps (fairness: 0.53), 12.42 Mbps (fairness: 0.71),8.84 Mbps (fairness: 0.88), and 4.57 Mbps (fairness: 0.88), respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1297-1307
• /
• 2009

The purpose of this paper is to propose a detection algorithm and a tracking algorithm based on silent time using MB-OFDM UWB(Multi-Band Orthogonal Frequency Division Multiplexing Ultra Wide Band) receiver in order to satisfy DAA(Detect And Avoid) regulation of Korea to permit UWB in 3.1~4.8 GHz. In DAA regulation of Korea, if UWB device receives a signal more than -80 dBm/MHz from the victim system during UWB operation, the UWB system should avoid the collision within 2 sec. In this paper, we proposed the detection algorithm to detect the victim signal received by －80 dBm/MHz for the avoidance process that changes the operating UWB frequency to other UWB frequency and the subcarrier tracking algorithm to follow up the subcarrier positions of the victim signal for the tonenulling avoidance process that decreases the TX power of subcarriers occupied by the victim signal by -70 dBm/MHz. The performance of the detection algorithm and the tracking algorithm suggested in this paper is verified in simulation results considering various conditions.